Panel Builder System Integrator

Danfoss2018 is a special year for Danfoss Drives, and a milestone in the Company’s history. Fifty years ago, Danfoss was the first company to mass-produce AC drives. Since then, Danfoss has been a forerunner in drives technology and digital solutions that enable customers to thrive in a world that is rapidly changing. 

Proud of our past

Danfoss Drives is a company that does things differently. It is unique in that it has always been 100% focused on developing, manufacturing and supplying AC drives. Since 1968, its portfolio of high-quality, application-optimized products and services has been designed to maximize process performance, save the most energy and minimize emissions.

In recognizing the potential of connectivity-, motor- and system independence, Danfoss Drives gives customers the freedom to optimize their systems, and the power to equip their drives to ensure they engineer the best possible AC-drive solutions without compromises, and find the optimum outcome for their challenges.

Prioritizing the present

A 50-year anniversary is a time for celebration. But, it’s also a time to reaffirm the Company’s commitment to its customers and partners, and to demonstrate how Danfoss is continually evolving. Recognizing and addressing the megatrends affecting the world today, the Company is innovating technology that, for example, tackles climate change, helps cope with rapid urbanization, provides successful and sustained water and wastewater management, and bridges the lag between energy generation and consumption. In addition, the latest trends in automation and connectivity are allowing Danfoss to change the way it works to further drive customer success and provide an ultimate, end-to-end, digital experience.

Focusing on the future

Capitalizing on decades of experience, Danfoss Drives is passionate about the future. In 2025, it is estimated that more than 5 billion people (over 50% of the estimated world population) will benefit directly or indirectly from the benefits provided by Danfoss Drives in their everyday lives. The installed base of AC drives will help to save the annual equivalent of 60 hours of global energy consumption.

Danfoss Drives has been around for 50 years, and yet the hopes the vision and the passion of the company and all its employees are still as fresh as they were back in 1968. While celebrating its success, Danfoss Drives will continue to strive for clean water, clean air, clean power and a clean future.

http://www.danfoss.us/newsstories/pe/danfossdrivesturns50/?ref=17179905130#/

Tools for the Trade

  • Prev
  The new Crimpfox DUO 10 crimping pliers from Phoenix Contact are perfect  when ...
  As easy as pick, slip and apply!  This intuitive multi-tool is designed to help ...
  Strong Hand Tools®, manufacturer of innovative Strong Hand Tools® Welding Clamps, ...
  Strong Hand Tools®, manufacturer of innovative Strong Hand Tools® Welding Clamps, ...
  Keeping your bins full just got a lot easier – and a lot faster. Each IRWIN ...
Using connectors on UL 508A cabinets used to be a huge hassle for the panel-builder. As a result, ...
  Delta Controls launches support page for CP2000 variable frequency drives and bypass ...
  ABB Automation Builder is the integrated software suite for machine builders and system ...
  Eaton's Power Xpert Branch Circuit Monitor (PXBCM) provides remote access to live energy ...
  The Fluke 438-II Power Quality and Motor Analyzer adds key mechanical measurement ...

Peers & Profiles

  • Prev
As our population grows and consumers continue to rely on technology for both essentials and ...
  Engineers play a key role in the advancement of our infrastructure and the development ...
  Kymera Systems is located in Leduc, Alberta and provides scalable IIoT solutions and the ...
  JAE Automation is proof positive that a cutting-edge, high-tech company can work with ...
  Nivek Automatisation is a forward-thinking company focused on providing advanced ...
Recently Panel Builder & Systems Integrator was invited to Rittal Canada’s Head ...
  New Electric first opened its doors in 1970, in Burlington, Ontario. The electrical ...
  Changes are coming hard and fast to the control and automation sectors, obligating a rise ...
  OPUS Automation was founded in 1998 in Ancaster, On and provides robotic and automation ...
  Panel Builder & Systems Integrator was given the opportunity to ask Steve ...

Hannover Messe 2018

German Federal Chancellor Angela Merkel and Mexican President Peña Nieto set the tone on day one of the HANNOVER MESSE/CeMAT double-header. Asked to shake hands with a robot, they both went for the more casual fist bump – a symbol for the relaxed, natural interaction of humans with digitization, robots and machine learning.

"Technology is not about competing with us humans; it's about assisting us. That is the core message conveyed by this trade fair, which has again underscored Hannover's reputation as a global hotspot for the digital transformation of industry," said Dr. Jochen Köckler, Chairman of the Managing Board at Deutsche Messe, at the close of HANNOVER MESSE and CeMAT. 

Read More

 

ATS AutomationATS Automation Tooling Systems Inc. (TSX: ATA) ("ATS" or the "Company") an industry-leading automation solutions provider, today announced the receipt of new enterprise Order Bookings from Bruce Power valued at approximately CAD $60 million. ATS was selected by Bruce Power to design and deliver innovative automated reactor component removal tools for their Major Component Replacement (MCR) project. ATS' solutions will enable Bruce Power to safely and efficiently remove and replace each reactor's 480 fuel channels and calandria tubes to update the reactors for continued safe and long service.

Read More

 

Latest Articles

  • Prev
  SCADA, or Supervisory Control and Data Acquisition, is a software application used for ...
  Linear, part of The Flodraulic Group of companies, is the world’s leading ...
Panel Builder & Systems Integrator recently had the opportunity to attend Hannover Messe ...
  To keep pace in the machine design industry, companies require a delicate balance of ...
  Today, organizations, especially the midsize ones, often find themselves in a quandary. ...

CSAAs the industrial and manufacturing sectors continue the shift from centralized to decentralized operations, the world of production as we know it will change completely. This new era, commonly referred to as the fourth industrial revolution or Industry 4.0, is characterized by—smart manufacturing processes where a plethora of intelligent machines, systems, and networks independently exchange and respond to information to manage production. When it comes to industrial control systems, cybersecurity evaluation becomes a necessary extension of functional safety.

Read More

 

Product News

  • Prev
  Manual control units are used when work is being carried out in a plant or machine's ...
  Machine builders can now get standalone machines to market faster using a newly updated ...
  Depending on the requirement, various expansion modules can be docked onto the base unit ...
  Utilizing the power of IO-Link, Balluff has created a visual indicator line capable of ...
  Beckhoff Automation has introduced the new TwinCAT 3 Building Automation software ...
  Emerson has introduced the Branson UWS40 ultrasonic splicer to meet growing global demand ...
  Encoder specialist POSITAL has expanded its line of kit-style encoders for feedback for ...
  B&R's Orange Box lets users access previously unreadable energy and process data from ...
  A new magnetic incremental linear encoder system with exceptional ride height provides a ...
  With the BenchREMOTE you can simultaneously remotely control up to three Epiroc Smart ...
Kerrwil Publications

538 Elizabeth Street, Midland,Ontario, Canada L4R2A3 +1 705 527 7666
©2018 All rights reserved

Use of this Site constitutes acceptance of our Privacy Policy (effective 1.1.2016)
The material on this site may not be reproduced, distributed, transmitted, cached or otherwise used, except with the prior written permission of Kerrwil