Panel Builder System Integrator

 

IMTS 2018September 24, 2018

A rapidly transforming industry sparked IMTS 2018 – The International Manufacturing Technology Show, to set all-time records for show metrics. The 32nd edition of the show drew a record registration of 129,415 people and featured 1,424,232 sq. ft. of exhibit space representing 2,123 booths and 2,563 exhibiting companies. IMTS 2018 ran from Sept. 10 – 15 at Chicago’s McCormick Place. Previous records were 121,764 registrants (IMTS 1998), 1,415,848 sq. ft. of exhibit space (IMTS 2000), 1,808 booths (IMTS 2016) and 2,407 exhibiting companies (IMTS 2016).

“Connectivity, the digital transformation of manufacturing, automation, additive manufacturing and a strong economy drove record numbers at IMTS 2018,” says Peter R. Eelman, Vice President – Exhibitions & Business Development at AMT – The Association For Manufacturing Technology, which owns and produces IMTS. “Digitization collided with a robust manufacturing industry to create our most dynamic show ever.”

Historically, years between IMTS lead to incremental machine improvements, which are now reaching physical limits. “The velocity of change has become different,” observes Tim Shinbara – AMT Vice President – Manufacturing Technology. “Analog technology yields linear improvements. Digital technology creates exponential growth and transforms how manufacturers and job shops operate.”

An Expansive Show

Notable growth areas at IMTS 2018 included an expanded Additive Manufacturing Pavilion that featured 51 exhibitors and covered 31,550 sq. ft., the strong partnership with HANNOVER MESSE USA and its four co-located shows and 510 exhibitors, an expanded Smartforce Student Summit that drew 6,000 more visitors than in 2016.

“IMTS witnessed an unprecedented degree of collaboration among exhibitors to develop additive manufacturing, automation and connected systems,” says Eelman. As an example, he points to the venture between 3D Systems and GF Machining, with their DMP Factory 500 metal 3D printing system unveiled to the public on the first day of the show.

Scott Harms, founder and President of MetalQuest Unlimited, has attended IMTS since 1996. After three days at this show, he was working on quotes for a load/unload robot, a shop floor CMM with an automation package, scheduling software and smart factory technology. He is also looking at cobots.

“There are so many ways of adapting automation that can make our operation more efficient, and they’re all here at IMTS 2018,” says Harms, who brought 11 people to the show. “We spent more time at the show this year, and it’s still not enough. Technology is at an all-time high.”

Illinois Governor Bruce Rauner addressed the IMTS audience on Sept. 12, stating that “There are four reasons that manufacturers from around the world are coming to the state of Illinois to build great products….people, transportation, innovation and energy. We’re driving great manufacturing growth in this state.” He noted that Illinois is the 17th largest manufacturing economy in the world, generates 600,000 manufacturing jobs, produces $100 billion dollars in manufactured products and creates the “most exciting and dynamic part of prosperity for everyone.”

Governor Rauner toured IMTS and rode Olli, a self-driving, digitally manufactured, 3D-printed, electric shuttle by Local Motors designed to streamline shared transportation systems around the world.

“The machines that you see at IMTS 2018 are moving at the speed of digital technology. They’re able to take files and make something that you've imagined,” says LM Industries CEO and co-founder John B. Rogers, Jr.” The tagline of IMTS 2018 says it the best, ‘Where dreamers and doers connect.’ That was the reason why we started a vehicle manufacturing company like Local Motors where we would be able to think it, print it and deploy it.” Olli gave more than 1,400 rides at IMTS 2018.

At the national government level, the Department of Defense Industrial Base Analysis and Sustainment (IBAS) held advanced manufacturing meetings and workshops at IMTS 2018 in order to continue the dialogue of ensuring U.S. industrial strength and readiness regarding technology, workforce, and furthering public-private collaborations. The IBAS team engaged more than 26 companies, with more than a dozen participating in the follow-on workshop.

Co-Located Shows

The HANNOVER MESSE USA co-located show hosted 510 exhibitors from around the world. At the center of HANNOVER MESSE USA was the Solutions Theater, which hosted more than 60 learning sessions that dove deeply into important topics such as IIoT, intelligent manufacturing and next-generation technology.

Dell Technologies, Microsoft and SAP joined other innovators in a new Digital Factory exhibition that showcased breakthrough products and solutions focused on integrated processes and IT solutions for plant operations. The show has increased its exhibition space by 26 percent over IMTS 2016 and by more than 440 percent since its first appearance eight years ago.

“We want all visitors to be more competitive in this global world. People need to connect and collaborate,” says Dr. Jochen Koeckler, CEO of Deutsche Messe AG, HANNOVER MESSE’s parent organization.

AMT President Douglas K. Woods adds that, “HANNOVER MESSE USA and IMTS bridge the gap between Silicon Valley technology and main street manufacturing. People find technologies here that change the spaces we work in.”

Two AMT’s Emerging Technology Centers

With digital technology, the pace of change makes it difficult to fully grasp the possibilities. IMTS 2018 directly addressed that issue with AMT’s Emerging Technology Center (ETC) on digital transformation, which featured demonstrations of how new science impacts manufacturing.

Cisco, an IT hardware company, exhibited at IMTS for the first time, bringing its expertise in the industrial security of data and connectivity to the ETC. Visitors learned about best practices to secure their plant floor and intellectual property. Security is now a top concern, and manufacturing facilities need to manage modern security with legacy operating systems.

IMTS 2018 will be noted as the year of digital transformation, as exemplified by an automated cell linking a Hurco CNC, a Universal Robot arm and Hexagon CMM using the MTConnect™ standard.

“MTConnect is the building block that enables intelligent systems and decision-making based on data rather than instinct,” says Eelman. “Instead of asking ‘What’s a connected system?’, visitors now say to exhibitors, ‘Your systems use MTConnect, right?’”

Paul Gray, Hurco’s R&D Manager, notes that the only required connection between machines is an Ethernet cable. “Simple connectivity and software communication overcomes a major hurdle for job shops that focus on high-mix, low-volume and even custom parts,” he says. 

Additive Advances

“Additive manufacturing is one of the most revolutionary technologies ever brought to IMTS, and that’s reflected in the ETC focusing on additive manufacturing,” says Eelman.

To show its speed and versatility, Oak Ridge National Laboratory created a “die-in a-day” demonstration that featured four stages of development: printing the die at Lincoln Electric, machining the printed die at Mazak, molding a part from the die at IACMI and 3D laser scanning the part at Quality Vision International.

“Traditionally it takes a minimum of six weeks to make molds, and it costs tens of thousands of dollars,” said Lonnie Love, Group Leader of Automation Robotics and Manufacturing at Oak Ridge National Laboratory. “We demonstrated every day of the show the ability to go from digital to actual production in less than 10 hours. This technology has practical uses that manufacturers can utilize now.”

This ETC also featured a “Knowledge Bar” hosted by America Makes where visitors learned about the development of education roadmaps, an online platform for members to exchange information and establishment of industry-wide additive manufacturing (AM) standards and specifications.

Additive Presence Grows Exponentially

Multiple companies chose IMTS 2018 as their venue to debut high-volume AM systems, including HP and EOS. Stephen Nigro, President of 3D Printing, introduced the HP Metal Jet printer. Designed for high volume production, the HP Metal Jet has 50 times more productivity than any other binder jet or laser. EOS launched the M 300-4 system, a multi laser metal 3D printing system designed for digital industrial additive manufacturing.

Perhaps more than any other technology at IMTS, AM represents the opportunity for small and start-up companies, from the U.S. and abroad, to gain exposure to a large audience and grow their dreams.

Austin Kron, Business Development Manager for first-time exhibitor BeAM Machines Inc., Strasbourg, France, believes AM will continue to generate company creation and growth as it becomes more industrialized, meeting production levels required by manufacturing. He cites one customer with certified aerospace repair job that has more than three thousand parts in flight.

“Every building in McCormick Place featured AM technology,” says Eelman. “Four years ago when we produced the Strati vehicle on the show floor, large-scale AM was a novelty. At IMTS 2018, AM technology was part of the manufacturing processes used to produce the entrance hall impact units.”

Smarter Solutions

ATHENA, the industry’s first voice-operated assistant, debuted at IMTS in the Makino and OKK booths, as well as in AMT’s ETC where visitors could control a 5-axis DMG Mori CNC.

“With 5-axis milling technology becoming more prevalent, operators need to know more to be highly productive,” says Dan Bagley, VP Marketing & Sales at iTSpeeX. “People don’t operate machines. People produce parts in a cell, and the machine is an actor in that cell. ATHENA provides intelligent assistance to machinists to allow them to operate multiple types of controls.”

Index previewed its iXworld, an online portal with four distinct service areas under a single interface. FANUC’s FIELD system, an open platform that collects machine data in real time, was connected to more than 300 machines from 144 companies at the show. SAP focused on how to use blockchain to improve trust and transparency from source to consumption. After meeting at the previous show, Infor and FORCAM collaborated to create a bi-direction interface between FORCAM’S plant floor information-gathering solution and Infor’s back-end ERP solution. Fraunhofer demonstrated the first 5G network in the world, which can record data at frequencies 10 to 100 times faster than LTE.

 “Not automating is our biggest competitor,” notes Robby Komljenovic, CEO and Chairman of Acieta. He says that automating is easier than companies think, adding that, “You need to exploit technology” to remain competitive.

Smartforce Student Summit

The IMTS 2018 Smartforce Student Summit broke its previous record with 23,000 registrants, 6,000 more than IMTS 2016 event.

“The national conversation around STEM education has had a positive influence on our ability to attract more schools to the Student Summit,” said Greg Jones Vice President of Smartforce Development for AMT.

The 2018 Student Summit gave students the opportunity to experience 25 different job functions available in manufacturing (view career pathways at amtonline.org).

“Students engage with the people who are in those manufacturing jobs right now, as well as see the technology and equipment they would use on the job. Technology is making manufacturing careers cool again,” says Jones. 

High school junior Kaitlyn Ludlam addressed the Student Summit as one of Top 24 Under 24 Leaders and Innovators in STEAM and Space, an annual awards program presented by The Mars Generation®.

“I’ve been doing a lot more with STEAM, reaching out to other kids who are being told they can’t do things, especially young women” says Ludlam. “I want to help them understand that they can do these things and not to listen to people who discourage them.”

The Miles for Manufacturing 5K fun run and fundraising event on Wednesday, Sept. 12, drew a record 486 runners. The 5K run generated almost $20,000 in proceeds, which will be used to acquire a STEM kit called Bionics4Education from Pesto-Didactic and donated to 14 STEM middle schools in the Chicago area.

Technical Conferences

In total, more than 2,500 visitors attended conference sessions during the week of IMTS. The largest event, in terms of both content and visitors, was The IMTS Conference.  

Presented by AMT and managed by GIE Media, The IMTS Conference attracted more than 850 people and featured 71 different sessions, each selected by a review board. Collectively, The IMTS Conference and the co-located events provided IMTS visitors with more than 142 hours of educational programming.

“The two most popular themes from the conference sessions were additive manufacturing and connected/digital manufacturing,” says Bill Herman, Director, International Exhibitions and Sponsorship, AMT. Many conference attendees were looking for ways to begin their “digital journey” within their shops or how to implement next steps, as well as how they might harness additive manufacturing into their processes.

“The Additive Manufacturing Conference was a tremendous success and our largest event to date with more than 575 attendees,” adds Travis Egan, Publisher, Additive Manufacturing magazine. “This included both current and future adopters of AM technology looking to deepen their knowledge base and learn more about the latest technologies in order to grow their manufacturing businesses.”

Based on feedback from the job shop and contractor community, IMTS created a program to address the challenges they face to help diminish their daily struggles.

“Our new Job Shops program attracted 405 participants,” Michelle Edmonson, Senior Director - Exhibitions Operations & Marketing, AMT. “With such strong interest at this show, we plan to continue our focus on jobs shop at IMTS 2020.”

Presentations included a seminar on the unending search for qualified labor hosted by four job shop owners. “The part of the discussion on reaching out to high school-level and community college students was good. I hadn’t thought about going to those sources to find kids interested in manufacturing,” says Aaron Collier, General Manager of Liberty Bottleworks in Yakima, Washington.

EOS’ “Applied AM – Where Additive Minds Meet” half-day symposium drew more than 300 people. In a sign of how far AM has progressed, topics included a session on AM digital supply chain readiness.

Seeking New Approaches

Visitors walked the floor of IMTS focusing on technologies, ideas, business practices and face-to-face conversations that advance manufacturing.

 “What I get at the show is the ability to meet people,” says Matt Guse, President of MRS Machining, who has attended IMTS since 1996. “You meet people just sitting around and talking. You share ideas, or they tell you what they’ve seen. Sometimes you think you’ve seen the whole show, and the next thing you know, someone tells you about something new in the next hall and you see how awesome it is. That’s why I always say IMTS is the Super Bowl of manufacturing.”

“We had very astute attendees coming to IMTS 2018,” says Eelman. “They are more educated about the health of their business and know that connectivity, digitization, automation and knowledge are part of the solution.

“IMTS takes all this, puts it under one roof and fosters connections. By the time we reach IMTS 2020, what visitors learned this week will have already changed their operations. People will come to renew old friendships and uncover new possibilities that expand their horizons.”

For more information www.IMTS.com

 

 

*Photo Caption: AMT President Douglas K. Woods and Deutsche Messe CEO Dr. Jochen Koeckler opened IMTS 2018. The strong partnership between AMT and HANNOVER MESSE USA helped drive record results at IMTS 2018, including 1,424,232 sq. ft. of exhibit space.

 

 

PB 25 Phoenix ControlCabinet 400

Phoenix Contact will provide you with support as your reliable partner in the optimization of your processes in control cabinet manufacturing.

Phoenix Contact provides you with holistic solutions in a cooperative partnership, based on their products, services, and experience. Digital data is used consistently, processes optimized, and time saved. The PROJECT complete planning and marking software supports your entire control cabinet manufacturing process. The program provides you with an intuitive user interface that enables you to individually plan, automatically check, and order terminal strips.

Thanks to optimized interfaces, you can easily integrate data from common CAE systems. This enables you to save significant amounts of time in the overall engineering process. Read More


 Like many cyclical industries, mining is reviving, driven by steady global economic growth and an increasing demand for materials to support new technologies like electric vehicles, renewable energy and mobile devices. Despite the optimism, the industry still faces major operational challenges including process efficiencies, cost control, worker health and safety, and skills gaps. To address these challenges, Rockwell Automation introduced The Connected Mine, leveraging the latest enabling and digital technologies.

Utilizing advanced analytics, The Connected Mine helps mining companies collect and aggregate data to gain end-to-end visibility into their operations and make informed business decisions to improve mining operations.

Read More

Latest Articles

  • Prev
  Flexibility and rapid production are two of the main demands placed on panel building and ...
  In this issue of Industry Insights with Owen we discuss factory automation ...
Allied Electronics & Automation is announcing the expansion of its current Sales organization. ...
The International Society of Automation (ISA) announced today the first Founding Members of its new ...
Canada continues to be an excellent performer for HARTING, recording double digit revenue growth on ...
  With the growth of e-Commerce, comes major changes in global retail and logistics. ...
This June the Pepperl+Fuchs road tour made its way through Ontario and Quebec, visiting several ...
  What do NBA sportsmen like the world champions from Toronto, The Raptors, and the ...
  In this issue of Industry Insights with Owen I had the privilege of asking ...

PB 25 Rittal MarineWaves 400For almost a half a century Canal Marine & Industrial of St Catharines, Ontario has provided electrical design, engineering and services around the clock to the merchant marine, naval and coastguard fleets in Canada and the rest of the World. In recent years, Canal has become a leader in the design and supply of marine hybrid power and propulsion systems. These systems utilize alternative methods for supporting propulsion and the vessel’s electrical power plant, so that fuel consumption and emissions are reduced.

Great Lakes Towing of Cleveland, Ohio (popularly called “The Towing Company”) operates the largest and most experienced U.S.-flag tugboat fleet. The Towing Company is a significant marine operations link in North America’s U.S. Great Lakes-Saint Lawrence Seaway marine transportation network, the fourth seacoast of the United States, an operating area that extends over 8,300 miles of shoreline, encompassing a water surface area of roughly 100,000 square miles. Read More

HARTING Electronics: Circular Connectors – A Round Thing

Circular Connectors 400

Jonas Diekmann, Technical Editor at HARTING Electronics

The metric system of units was introduced for the first time in 1793 during the French Revolution and is used even today in almost all countries worldwide. The metric round plug connectors are also based on this system of units and are a known standard in raw industrial applications. In various diameters and codes, they are a reliable connection for the three lifelines of industrial applications. Data, signals and performance are essential for drive, control and communication. The typical round appearance with the thread for screwing in is a success story up to the present. But classics often also still reveal unexpected potential. With its new PushPull Locking and Com-Lock HARTING is making two round guild models ready for the future.

Metric round plug connectors are some of the most widespread interfaces worldwide, when it comes to cabling for machines, industrial plant and devices under demanding conditions of use.

Read More

Rockwell SleemanTen years ago, tourists looking for a taste of the local life in Southern Canada may have asked for one of the region’s best wines. Today, it’s all about craft beer.

From entrepreneurial newcomers to large-scale producers, brewers in Canada are cashing in on the thirst for craft beer. The number of microbreweries – ­producing less than 25,000 cases of 24 – has more than doubled in the last seven years.

The explosion in craft beer popularity had one company – Sleeman Breweries – bursting at its production seams. The third-largest brewer in Canada, Sleeman brews and distributes popular beers from lagers to pale ales.

 Read More

 

Coming Soon: The new EPLAN Pro Panel, Version 2.8, Virtual control cabinet engineering – fully matured

The new EPLAN Pro Panel, Version 2.8 is making its first big appearance at the SPS IPC Drives. The software for virtual 3D control cabinet engineering is characterised by its expanded flexibility, surprising users with a brand new 4K-capable user interface. It’s also causing decision-makers to sit up and take notice: during live, joint presentations in Nuremberg, EPLAN and Rittal will be introducing a whole series of innovations in the context of control cabinet engineering.

These include complementary software solutions for engineering and preplanning operations, innovative system technology for housings, power distribution and climate-control systems, automation technologies, and digital assistance systems for integrated automation of manufacturing processes. EPLAN and Rittal are thereby positioning themselves as solutions providers offering integrated solutions for optimising processes in control cabinet engineering: combined machine/hardware and software solutions, product-accompanying data and comprehensive on-site process integration services for customers.

Read More: < ...

Product News

  • Prev
With Balluff’s new online Machine Vision configurator tool, users can confidently and ...
Endress+Hauser’s new ITHERM TrustSens thermometer features the world’s first RTD sensor ...
Endress+Hauser’s new ITHERM TrustSens thermometer features the world’s first RTD sensor ...
One of the core requirements of flexible production is the ability to quickly install machines and ...
For human beings and robots to be able to work harmoniously in communal machining areas without any ...
Power Machine Tray Cable is available in sizes from 18 AWG to 8 AWG with 3 to 25 unshielded ...
When it comes to transporting heavy or fragile goods and applications that involve manual ...
Due to the non-expandable switching function, the PSR-MC31 safety relay module is suitable for all ...
Balluff’s newest  inductive coupler systems transmit high-level electrical power (up to ...
Benefit from all the options offered by IO-Link: the point-to-point connection enables you to ...
Kerrwil Publications

538 Elizabeth Street, Midland,Ontario, Canada L4R2A3 +1 705 527 7666
©2019 All rights reserved

Use of this Site constitutes acceptance of our Privacy Policy (effective 1.1.2016)
The material on this site may not be reproduced, distributed, transmitted, cached or otherwise used, except with the prior written permission of Kerrwil