Panel Builder System Integrator

30kw InRow Data Centre 400May 7, 2019

Schneider Electric recently announced the expansion of its EcoStruxure Ready cooling portfolio, with the introduction of a 30kW InRow DX solution. Available in a 300mm rack format, this data center cooling solution offers industry leading efficiency and addresses the increasing demand for higher density cooling in the data center.    

The trend toward modernization and consolidation of data centers is driving the need for a cooling solution that provides more cooling capacity in a smaller footprint and flexible capacity to adapt to the actual data center load. The 30kW InRow DX is ideal for data centers that are being modernized or retrofitted, or anywhere IT space is at a premium. Due to its powerfully compact size and energy efficient design, the InRow DX is the most versatile and predictable cooling system for next generation small and medium data centers and an optimal choice for edge and enterprise environments.

The 30kW InRow DX offers numerous benefits including:

  • Cooling density: provides up to 3x more capacity compared to previous models, meaning fewer units are needed, freeing up more floor space for IT equipment.
  • High efficiency: uses energy efficient compressor and fans to reduce OpEx and make more power available for other IT equipment.
  • Flexible design: easily addresses common installation constraints and reduces service requirements inside the white space.
  • Variable capacity: Variable Speed Drive compressor allows you to adapt cooling load to the actual thermal demand.
  • Cost Savings: leveraging the low amps of the unit to deliver electrical CapEx reduction.
  • EcoStruxure™ Ready: easy to manage with global visibility of equipment performance and status supported with a 24/7 expert service bureau.

"If you are consolidating, modernizing, or expanding your data center and struggling to manage the heat profile introduced by the new servers, the versatile new 30kW InRow DX is ideal," said Ben Smith, Vice President of Cooling, Schneider Electric. "Powerfully compact and with unmatched efficiency, the 30kW InRow allows for fewer units to provide the same amount of cooling capacity."

Click HERE to find out more about the 30kW InRow DX and Schneider Electric's complete line of cooling solutions.

PB 25 Phoenix ControlCabinet 400

Phoenix Contact will provide you with support as your reliable partner in the optimization of your processes in control cabinet manufacturing.

Phoenix Contact provides you with holistic solutions in a cooperative partnership, based on their products, services, and experience. Digital data is used consistently, processes optimized, and time saved. The PROJECT complete planning and marking software supports your entire control cabinet manufacturing process. The program provides you with an intuitive user interface that enables you to individually plan, automatically check, and order terminal strips.

Thanks to optimized interfaces, you can easily integrate data from common CAE systems. This enables you to save significant amounts of time in the overall engineering process. Read More


 Like many cyclical industries, mining is reviving, driven by steady global economic growth and an increasing demand for materials to support new technologies like electric vehicles, renewable energy and mobile devices. Despite the optimism, the industry still faces major operational challenges including process efficiencies, cost control, worker health and safety, and skills gaps. To address these challenges, Rockwell Automation introduced The Connected Mine, leveraging the latest enabling and digital technologies.

Utilizing advanced analytics, The Connected Mine helps mining companies collect and aggregate data to gain end-to-end visibility into their operations and make informed business decisions to improve mining operations.

Read More

Latest Articles

  • Prev
  Over the last two and a half centuries, industry has embraced change and transformation. ...
The threat posed by cyber-attacks is highly problematic in the face of old systems and their data ...
  As many know the annual Hannover Messe trade fair was held in Germany at the beginning of ...
Ten years ago, tourists looking for a taste of the local life in Southern Canada may have asked for ...
“HANNOVER MESSE 2019 showed that it is the world’s most important platform for all ...
  The first step when starting any Industry 4.0 initiative or digital transformation within ...

Rockwell SleemanTen years ago, tourists looking for a taste of the local life in Southern Canada may have asked for one of the region’s best wines. Today, it’s all about craft beer.

From entrepreneurial newcomers to large-scale producers, brewers in Canada are cashing in on the thirst for craft beer. The number of microbreweries – ­producing less than 25,000 cases of 24 – has more than doubled in the last seven years.

The explosion in craft beer popularity had one company – Sleeman Breweries – bursting at its production seams. The third-largest brewer in Canada, Sleeman brews and distributes popular beers from lagers to pale ales.

 Read More

 

PB 25 Rittal MarineWaves 400For almost a half a century Canal Marine & Industrial of St Catharines, Ontario has provided electrical design, engineering and services around the clock to the merchant marine, naval and coastguard fleets in Canada and the rest of the World. In recent years, Canal has become a leader in the design and supply of marine hybrid power and propulsion systems. These systems utilize alternative methods for supporting propulsion and the vessel’s electrical power plant, so that fuel consumption and emissions are reduced.

Great Lakes Towing of Cleveland, Ohio (popularly called “The Towing Company”) operates the largest and most experienced U.S.-flag tugboat fleet.  Read More

 

HARTING Ellectronics: Circular Connectors – A Round Thing

Circular Connectors 400

Jonas Diekmann, Technical Editor at HARTING Electronics

The metric system of units was introduced for the first time in 1793 during the French Revolution and is used even today in almost all countries worldwide. The metric round plug connectors are also based on this system of units and are a known standard in raw industrial applications. In various diameters and codes, they are a reliable connection for the three lifelines of industrial applications. Data, signals and performance are essential for drive, control and communication. The typical round appearance with the thread for screwing in is a success story up to the present. But classics often also still reveal unexpected potential. With its new PushPull Locking and Com-Lock HARTING is making two round guild models ready for the future.

 Read More

Coming Soon: The new EPLAN Pro Panel, Version 2.8, Virtual control cabinet engineering – fully matured

The new EPLAN Pro Panel, Version 2.8 is making its first big appearance at the SPS IPC Drives. The software for virtual 3D control cabinet engineering is characterised by its expanded flexibility, surprising users with a brand new 4K-capable user interface. It’s also causing decision-makers to sit up and take notice: during live, joint presentations in Nuremberg, EPLAN and Rittal will be introducing a whole series of innovations in the context of control cabinet engineering.

These include complementary software solutions for engineering and preplanning operations, innovative system technology for housings, power distribution and climate-control systems, automation technologies, and digital assistance systems for integrated automation of manufacturing processes. EPLAN and Rittal are thereby positioning themselves as solutions providers offering integrated solutions for optimising processes in control cabinet engineering: combined machine/hardware and software solutions, product-accompanying data and comprehensive on-site process integration services for customers.

Read More: < ...

Product News

  • Prev
Industry-leading automation solution provider Omron Automation Americas recently announced the ...
B&R's latest addition to its Compact-S series is a compact controller with an ...
Phoenix Contact is adding a customized solution for impedance-sensitive signal circuits with more ...
You can wire conductor cross sections of up to 185 mm² very quickly using the PTPOWER 185 ...
With the new active redundancy module from Phoenix Contact, you will increase the availability of ...
HARTING, HIROSE and FLUKE networks announced the availability of an adapter supporting the ix ...
Three new sizes of INTEGRA Premium Series polycarbonate enclosures with lift-off screw cover, ...
Siemens Smart Infrastructure expands the proven Gamma instabus building system with new IP routers ...
Schneider Electric, the leader in digital transformation of energy management and automation, today ...
FLIR Systems, Inc.introduces FLIR Thermal Studio, a thermal image analysis and reporting software ...
Kerrwil Publications

538 Elizabeth Street, Midland,Ontario, Canada L4R2A3 +1 705 527 7666
©2019 All rights reserved

Use of this Site constitutes acceptance of our Privacy Policy (effective 1.1.2016)
The material on this site may not be reproduced, distributed, transmitted, cached or otherwise used, except with the prior written permission of Kerrwil