Panel Builder System Integrator

May 29, 2019

PBSI Onyx logo ETL 400Onyx Engineering has been registered to Intertek's ETL Panel Builder Certification Program for Industrial Control Panels.  Panels bearing the mark certify that they were tested to UL 508A 2nd and CSA C22.2 No.14 standards.   The ETL Listed Mark is accepted by regulatory authorities in every jurisdiction in the United States and Canada.

UL 508A is required for industrial control panels intended for general industrial use in the United States, operating from a voltage of 1000 volts or less.  The panels are intended for installation in ordinary locations, in accordance with the National Electrical Code, ANSI/NFPA 70, where the ambient temperature does not exceed 40 degrees C.

CSA C22.2 standard covers industrial control panels and assemblies rated at not more than 1500V, intended to be installed and used in non-hazardous locations in accordance with the rules of the Canadian Electrical Code, Part 1.

The ETL standard ensures that every aspect of our panel fabrications business is well-run and continually improving, including key processes, management roles and responsibilities, documentation, customer satisfaction, employee training, service and internal audits. The process of upgrading our build process began last year when we decided to expand our market presence by achieving the necessary steps to become a certified panel build organization. Pursuing ETL certification was a logical next step for improving our system while growing our business.

This certification strengthens Onyx Engineering’s competitive position and standardizes our quality processes across all of our programs. The ETL Panel Builder Program covers proper component usage, enclosure environmental ratings, and conformance to National Electric Code (NEC) and Canadian Electrical Code (CEC) standards.

Source


Emerson’s New Easy-to-deploy Monitoring Accelerates Asset Digitalization

Emerson MonitoringEmerson recently introduced the AMS Asset Monitor edge analytics device, which digitalizes essential asset data and analytics for better operations performance and improved decision making. AMS Asset Monitor provides actionable insights into essential assets that were previously monitored only with infrequent assessments. The new edge analytics device will connect with Emerson’s Plantweb Optics asset performance platform to provide key operations personnel with instant asset health details for operations and maintenance decision making. 

 

 

Read More

Latest Articles

  • Prev
  EPLAN, PILZ, Rittal and WAGO, four leading companies in automation and advanced ...
As the Vice President and General manager of Schneider Electric’s Secure Power division David ...
For the fourth year in a row, Manufacturers Automation Inc. has been awarded the “Outstanding ...
  Flexibility and rapid production are two of the main demands placed on panel building and ...
  In this issue of Industry Insights with Owen we discuss factory automation ...
Allied Electronics & Automation is announcing the expansion of its current Sales organization. ...
The International Society of Automation (ISA) announced today the first Founding Members of its new ...
Canada continues to be an excellent performer for HARTING, recording double digit revenue growth on ...
  With the growth of e-Commerce, comes major changes in global retail and logistics. ...
This June the Pepperl+Fuchs road tour made its way through Ontario and Quebec, visiting several ...

Printing With Precision – Improving Existing High-Speed Equipment

JAE LogoThe Scenario

A high-speed printing company had partially completed an upgrade to their equipment. The printing machine used two alternating print heads to produce units at a rate of more than 11/s. Due to the nature of the product, speed, accuracy, and repeatability were extremely important. The process needed to be consistent as any defect would impact production further down the line.

To ensure there were no errors, the units would pass through a vision system designed to detect defects and other irregularities. A mechanical reject system would then remove any defected units from the line.

Read More

Important safety considerations for machine shop equipment

OmronIf not properly safeguarded, machine shop equipment is capable of seriously injuring an operator. Lathes, band saws and other simple machines can cut or even sever a finger or a limb. Due to the major potential for harm, it’s essential for manufacturers to comply with all mandated safety standards for the types of machines they employ.

What are the standards?

To get started with machine shop equipment safety compliance, manufacturers can look up the safety standards applicable to their region. In the United States, relevant standards are sorted into the following three categories:

Read More

Cut Startup Costs and Inefficiencies with the Right MAC

RockwellBy Simon McEntee

Reduce Integration Challenges by Embedding an OEM MAC in Your Gas Processing Facility Projects

You’ve been through it before. Just days away from a scheduled plant or platform launch and you’re scrambling to connect OEM skids and at risk of missing your launch deadline.

Almost every oil and gas company has experienced the chaos that comes with trying to finish a start-up in its final days. The good news - this doesn’t have to be your status quo.

 Read More

 

Coming Soon: The new EPLAN Pro Panel, Version 2.8, Virtual control cabinet engineering – fully matured

The new EPLAN Pro Panel, Version 2.8 is making its first big appearance at the SPS IPC Drives. The software for virtual 3D control cabinet engineering is characterised by its expanded flexibility, surprising users with a brand new 4K-capable user interface. It’s also causing decision-makers to sit up and take notice: during live, joint presentations in Nuremberg, EPLAN and Rittal will be introducing a whole series of innovations in the context of control cabinet engineering.

These include complementary software solutions for engineering and preplanning operations, innovative system technology for housings, power distribution and climate-control systems, automation technologies, and digital assistance systems for integrated automation of manufacturing processes. EPLAN and Rittal are thereby positioning themselves as solutions providers offering integrated solutions for optimising processes in control cabinet engineering: combined machine/hardware and software solutions, product-accompanying data and comprehensive on-site process integration services for customers.

Read More: < ...

Product News

  • Prev
Aluminum and copper conductors can be installed quickly, easily, and safely in the new UL-approved ...
You will be impressed by the new TRIO POWER power supplies with IP67 protection from Phoenix ...
4mm (smooth) and 5mm (M5 threaded) round photoelectric sensors are now available from ...
The NITRA pneumatic AC Series of coalescing air filters from AutomationDirect allows finer removal ...
The smallest robot controller in its class, the ultra-compact YRC1000micro minimizes installation ...
Introduced specifically for manufacturers branching out into robotics, the new Smart Series suite ...
Yaskawa Cockpit is a new software platform that monitors, accumulates and visually delivers ...
The next generation of robot programming, Smart Pendant radically changes the way a robot is ...
Ideal for high-speed assembly and handling applications, the GP7, GP8 and GP12 robots are fast, ...
Featuring power and force limiting technology, Yaskawa Motoman’s HC10 and HC10DT robots work safely ...
Kerrwil Publications

538 Elizabeth Street, Midland,Ontario, Canada L4R2A3 +1 705 527 7666
©2019 All rights reserved

Use of this Site constitutes acceptance of our Privacy Policy (effective 1.1.2016)
The material on this site may not be reproduced, distributed, transmitted, cached or otherwise used, except with the prior written permission of Kerrwil