Panel Builder System Integrator

JMP logo Frappier 400June 3, 2019

The Automation and Controls industry landscape is a very dynamic one in which technology, customer requirements, and industry standards are in a state of constant change and evolution. This environment requires solution providers to demonstrate agility and adaptivity to these ever-changing industry conditions in order to effectively support their clients, deliver value, and remain relevant in the market. In line with this trend, JMP Solutions is committed to proactively expanding its capabilities and footprint across target industry segments in order to continuously redefine what is possible for their customers.

As such, JMP Solutions announced today that they have acquired Calgary-based Hi-Def Controls, enhancing their presence in Western Canada while benefitting from additional competencies specifically in the Oil & Gas, Water & Wastewater, and Power Systems industry segments. The two organizations are a natural fit not only due to their focused industry alignment, but most notably, their common customer centric philosophy, which revolves around supporting their clients throughout the lifetime of their systems, not just for the length of the project; a culture which truly sets them apart from the bulk of the System Integrator market.

Scott Shawyer, JMP President & CEO, stated, “We are very happy that the Hi-Def team has decided to join us at JMP. Their capabilities are world class and allow us to ensure our customers have effective strategies in place for managing and optimizing their systems, information and technologies. Their customers will now be able to draw on the full-service offering of JMP. Their design and quality control expertise will complement our existing Calgary branch competencies.”

The Hi-Def Controls team comes with a wealth of relevant industry-specific experience which will not only provide synergies to the JMP Solutions organization but will also compliment the skills of the current JMP team allowing for growth, promoting learning, and ultimately resulting in the delivery of an even higher-level of end to end customer experience. 

“I could not be more thrilled to have our team become part of JMP Solutions,” said Darren Hemsing (former President / CEO of Hi-Def Controls) and now JMP Calgary’s Automation Team Lead. “The customer driven values and business philosophies of the JMP team are in alignment with what we’ve been living within Hi-Def. I’m excited by the opportunity to be able to continue to support our clients in the manner that they have come to expect from Hi-Def Controls but now with the expanded capabilities afforded to us through the competencies that JMP Solutions brings to the table.”

For more information about JMP Solutions visit www.jmpsolutions.com or LinkedIn.


Emerson’s New Easy-to-deploy Monitoring Accelerates Asset Digitalization

Emerson MonitoringEmerson recently introduced the AMS Asset Monitor edge analytics device, which digitalizes essential asset data and analytics for better operations performance and improved decision making. AMS Asset Monitor provides actionable insights into essential assets that were previously monitored only with infrequent assessments. The new edge analytics device will connect with Emerson’s Plantweb Optics asset performance platform to provide key operations personnel with instant asset health details for operations and maintenance decision making. 

 

 

Read More

Latest Articles

  • Prev
  EPLAN, PILZ, Rittal and WAGO, four leading companies in automation and advanced ...
As the Vice President and General manager of Schneider Electric’s Secure Power division David ...
For the fourth year in a row, Manufacturers Automation Inc. has been awarded the “Outstanding ...
  Flexibility and rapid production are two of the main demands placed on panel building and ...
  In this issue of Industry Insights with Owen we discuss factory automation ...
Allied Electronics & Automation is announcing the expansion of its current Sales organization. ...
The International Society of Automation (ISA) announced today the first Founding Members of its new ...
Canada continues to be an excellent performer for HARTING, recording double digit revenue growth on ...
  With the growth of e-Commerce, comes major changes in global retail and logistics. ...
This June the Pepperl+Fuchs road tour made its way through Ontario and Quebec, visiting several ...

Printing With Precision – Improving Existing High-Speed Equipment

JAE LogoThe Scenario

A high-speed printing company had partially completed an upgrade to their equipment. The printing machine used two alternating print heads to produce units at a rate of more than 11/s. Due to the nature of the product, speed, accuracy, and repeatability were extremely important. The process needed to be consistent as any defect would impact production further down the line.

To ensure there were no errors, the units would pass through a vision system designed to detect defects and other irregularities. A mechanical reject system would then remove any defected units from the line.

Read More

Important safety considerations for machine shop equipment

OmronIf not properly safeguarded, machine shop equipment is capable of seriously injuring an operator. Lathes, band saws and other simple machines can cut or even sever a finger or a limb. Due to the major potential for harm, it’s essential for manufacturers to comply with all mandated safety standards for the types of machines they employ.

What are the standards?

To get started with machine shop equipment safety compliance, manufacturers can look up the safety standards applicable to their region. In the United States, relevant standards are sorted into the following three categories:

Read More

Cut Startup Costs and Inefficiencies with the Right MAC

RockwellBy Simon McEntee

Reduce Integration Challenges by Embedding an OEM MAC in Your Gas Processing Facility Projects

You’ve been through it before. Just days away from a scheduled plant or platform launch and you’re scrambling to connect OEM skids and at risk of missing your launch deadline.

Almost every oil and gas company has experienced the chaos that comes with trying to finish a start-up in its final days. The good news - this doesn’t have to be your status quo.

 Read More

 

Coming Soon: The new EPLAN Pro Panel, Version 2.8, Virtual control cabinet engineering – fully matured

The new EPLAN Pro Panel, Version 2.8 is making its first big appearance at the SPS IPC Drives. The software for virtual 3D control cabinet engineering is characterised by its expanded flexibility, surprising users with a brand new 4K-capable user interface. It’s also causing decision-makers to sit up and take notice: during live, joint presentations in Nuremberg, EPLAN and Rittal will be introducing a whole series of innovations in the context of control cabinet engineering.

These include complementary software solutions for engineering and preplanning operations, innovative system technology for housings, power distribution and climate-control systems, automation technologies, and digital assistance systems for integrated automation of manufacturing processes. EPLAN and Rittal are thereby positioning themselves as solutions providers offering integrated solutions for optimising processes in control cabinet engineering: combined machine/hardware and software solutions, product-accompanying data and comprehensive on-site process integration services for customers.

Read More: < ...

Product News

  • Prev
Aluminum and copper conductors can be installed quickly, easily, and safely in the new UL-approved ...
You will be impressed by the new TRIO POWER power supplies with IP67 protection from Phoenix ...
4mm (smooth) and 5mm (M5 threaded) round photoelectric sensors are now available from ...
The NITRA pneumatic AC Series of coalescing air filters from AutomationDirect allows finer removal ...
The smallest robot controller in its class, the ultra-compact YRC1000micro minimizes installation ...
Introduced specifically for manufacturers branching out into robotics, the new Smart Series suite ...
Yaskawa Cockpit is a new software platform that monitors, accumulates and visually delivers ...
The next generation of robot programming, Smart Pendant radically changes the way a robot is ...
Ideal for high-speed assembly and handling applications, the GP7, GP8 and GP12 robots are fast, ...
Featuring power and force limiting technology, Yaskawa Motoman’s HC10 and HC10DT robots work safely ...
Kerrwil Publications

538 Elizabeth Street, Midland,Ontario, Canada L4R2A3 +1 705 527 7666
©2019 All rights reserved

Use of this Site constitutes acceptance of our Privacy Policy (effective 1.1.2016)
The material on this site may not be reproduced, distributed, transmitted, cached or otherwise used, except with the prior written permission of Kerrwil