No HANNOVER MESSE in 2020

PB 22 Hannover Logo 400

March 26, 2020

The world of industry will not be able to meet in Hannover this year. Comprehensive travel restrictions, bans on group gatherings and a prohibition decree in the Hannover region make it impossible to stage HANNOVER MESSE. At the same time, the corona crisis is affecting the economy, and the manufacturing industry – HANNOVER MESSE’s core clientele – is already struggling with serious consequences of the pandemic. Demand and sales in German industry are declining, resulting in supply bottlenecks, production stops and reduced working hours for employees.

“Given the dynamic development around Covid-19 and the extensive restrictions on public and economic life, HANNOVER MESSE cannot take place this year,” says Dr. Jochen Köckler, Chairman of the Board of Management, Deutsche Messe AG. “Our exhibitors, partners and our entire team did everything they could to make it happen, but today we have to accept that in 2020 it will not be possible to host the world’s most important industrial event.”

It is the first time in HANNOVER MESSE’s 73-year history that the event will not take place. However, the organizers will not let the show completely vanish. “The need for orientation and exchange is particularly important in times of crisis,” says Köckler. “That is why we are currently working intensely on a digital information and networking plattform for HANNOVER MESSE that we will open to our customers shortly.”

Various web-based formats will enable HANNOVER MESSE exhibitors and visitors to exchange information about upcoming economic policy challenges and technological solutions. Live streams will transport interactive expert interviews, panel discussions and best-case presentations all over the world. The online exhibitor and product search is also being enhanced, for example with a function that enables visitors and exhibitors to contact each other directly.

“We firmly believe that nothing can replace direct, person-to-person contact and we are already looking forward to the time after Corona,” says Köckler. “But especially in times of crisis, we must be flexible and act pragmatically. As organizers of the world’s most important industrial trade fair, we want to offer orientation and sustain economic life during the crisis. We are doing that with our new digital offering.”

Thilo Brodtmann, executive director of Germany’s Mechanical Engineering Industry Association (VDMA), said, “The cancellation of HANNOVER MESSE 2020 is an unfortunate decision, but it is the only correct one. The mechanical engineering industry must now concentrate on minimizing the consequences of the pandemic in its own operations so that it can start up again. In April 2021, the engineers will be back in Hannover in full force.”

Wolfgang Weber, Chairman of the ZVEI Management Board: “The fact that Hannover Messe 2020 cannot be hosted is a bitter loss, but it is the right decision. For the electrical industry, the fair is the showcase to the world, which unfortunately remains closed this year. So our companies will use the time until 2021 to manage the considerable consequences of Corona. Next year, they will then present themselves with the latest products and solutions for Industry 4.0 and the energy system of the future.”

Source

Related Articles


Changing Scene

  • Andreas Sobotta to Assume Role of Vice President North and South America for Pilz Automation

    Andreas Sobotta to Assume Role of Vice President North and South America for Pilz Automation

    Pilz Automation Safety Canada L.P. announces that their long-term CEO and GM, Andreas Sobotta, will assume the role of Vice President North and South America, effective immediately. He will still work from the Canadian office in Mississauga and visit all other subsidiaries in North and South America. Pilz will take their time to find a… Read More…

  • SEW-Eurodrive: MAXOLUTION System Solutions

    SEW-Eurodrive: MAXOLUTION System Solutions

    Whether in production or logistics operations, MAXOLUTION is synonymous with innovation in factory automation – across all industries and worldwide – helping you achieve your vision of an adaptable and resilient lean smart factory. Under the MAXOLUTION brand, SEW-EURODRIVE creates customized solutions for cutting-edge materials handling technology – from the shop floor through to IT.… Read More…


Sponsored Content
The Easy Way to the Industrial IoT

The way to the Industrial IoT does not have to be complicated. Whether access to valuable data is required or new, data-driven services are to be generated, Weidmuller enables its customers to go from data to value the easy way. Weidmuller’s comprehensive and cutting-edge IIoT portfolio applies to greenfield and brownfield applications. Weidmuller offers components and solutions from data acquisition, data pre-processing, data communication and data analysis.

Visit Weidmuller’s Industrial IoT Portfolio.


ADVANCED Motion Controls Takes Servo Drives to New Heights (and Depths) with FlexPro Extended Environment Product Line

Advanced Motion Controls is proud to announce the addition of six new CANopen servo drives with Extended Environment capabilities to their FlexPro line. These new drives join AMC’s existing EtherCAT Extended Environment FlexPro drives, making the FlexPro line the go-to solution for motion control applications in harsh environments.

Many motion control applications take place in conditions that are less than ideal, such as extreme temperatures, high and low pressures, shocks and vibrations, and contamination. Electronics, including servo drives, can malfunction or sustain permanent damage in these conditions.

Read More


Service Wire Co. Announces New Titles for Key Executives

Bruce Kesler and Mark Gatewood have been given new titles and responsibilities for Service Wire Co.

Bruce Kesler has assumed the role of Senior Director – Business Development. Bruce will be responsible for Service Wire’s largest strategic accounts and our growing Strategic Accounts Team.

Mark Gatewood has been promoted to the role of Vice President – Sales & Marketing. In this role, Gatewood will lead the efforts of Service Wire Company’s entire sales and marketing organization in all market verticals.

Read More


Tri-Mach Announces the Purchase of an Additional 45,000 sq ft. Facility

Tri-Mach Elmira Facility

Recently, Tri-Mach Inc. was thrilled to announce the addition of a new 45,000 sq ft. facility. Located at 285 Union St., Elmira, ON, this facility expands Tri-Mach’s capabilities, allowing them to better serve the growing needs of their customers.

Positioning for growth, this additional facility will allow Tri-Mach to continue taking on large-scale projects, enhance product performance testing, and provide equipment storage for their customers. The building will also be the new home to their Skilled Trades Centre of Excellence.

Read More


JMP Parent Company, CONVERGIX Acquires AGR Automation, Expanding Global Reach

Convergix Automation Solutions has completed the acquisition of AGR Automation (“AGR”), a UK-based provider of custom, high-performance automation design and systems integration primarily to the life sciences industry.

Following Convergix’s acquisitions of JMP Solutions in August 2021 and Classic Design in February 2022, AGR marks the third investment in Crestview’s strategy to build Convergix into a diversified automation solutions provider targeting the global $500+ billion market, with a particular focus on the $70 billion global systems integration and connectivity segments. Financial terms of the transaction were not disclosed.

Read More


Latest Articles

  • Making the Sustainable Transformation of the Process Industry a Success

    Making the Sustainable Transformation of the Process Industry a Success

    By Krystie Johnston and Dr. Manfred Jagiella – Sustainability facilitates opportunity when approached with a mindset to preserve resources and promote circularity. We share one Earth, and it is our global responsibility to care for it for the next generation. Endress+Hauser is one global company that understands this responsibility – and practices it as well.… Read More…

  • Why NOARK’s 12VDC Shunt Trip Coils for MCCBs Make Power Systems Reliable and Safer

    Why NOARK’s 12VDC Shunt Trip Coils for MCCBs Make Power Systems Reliable and Safer

    Circuit breakers are an essential component of any modern electrical system. Designed to protect your home or business from potential overloads or short circuits, these devices are your first line of defense against electrical fires. There are, however, situations where remote tripping of the circuit breaker may be required. It could be for operational reasons,… Read More…