|

Kraken Awarded $1.8M in Project Funding to Develop Mooring Chain Laser Inspection Sensor

PBSI Kraken SeaVisionr 400

Aug 8, 2019

Kraken Robotics announced that following successful trials with Husky Energy, its wholly owned subsidiary, Kraken Robotic Systems, has been awarded funding for the development of a mooring chain laser inspection sensor, for use in offshore oil and gas applications. Under the project, a total of $1.8 million of funding is being provided in cash and in-kind services from Husky ($1.26M) and the Government of Newfoundland and Labrador, through the Innovation and Business Investment Corporation ($540,000). The project cash component received by Kraken will be $720,000.

In October 2018, Kraken and Husky collaborated to test Kraken’s SeaVision 3D underwater laser imaging system as a potential inspection tool for mooring chains at the SeaRose Floating Production, Storage and Offloading (FPSO) vessel. This demonstration showed that Kraken’s SeaVision technology can complete an inspection of a mooring chain and provide all the specifications required by the regulators. Under this new 16-month development project, Kraken will work with Husky to address remaining technology gaps identified, with a view towards future commercialization of SeaVision as a contactless inspection tool for the offshore oil and gas industry.

Mooring chains are a key component that anchor FPSO vessels to the seafloor. FPSOs are commonly used in the oil and gas industry and there are presently two in production off the Grand Banks of Newfoundland (Terra Nova and SeaRose). Today, there are over 250 FPSO vessels deployed worldwide.

A floating facility has multiple mooring legs composed of multiple links, each link is approximately one metre in length and 15 cm in bar diameter. The mooring chains are constantly in motion (up to 1 m/s) through the water column as the floating facilities are subjected to environmental conditions. Asset integrity regulations require regular inspections of the mooring chains at defined regions with millimetric accuracy to monitor for signs of wear and verify system integrity.

Current practice for mooring chain inspection requires a large support vessel, to deploy a work class remotely operated vehicle (ROV), which carries a mechanical calliper on its hydraulic manipulator. While the chain is moving in the water column, the ROV pilot must grasp a chain link to perform the required measurement. This process must be repeated several times, sampling several links in each mooring chain. The identified concerns with the current process include: i) efficiency; ii) risk; and, iii) environment.

Kraken’s laser scanning sensor solution will perform contactless mooring chain inspection from a two-metre stand-off distance and continue to provide the required accuracy. The advantages of this solution will be: i) speed: SeaVision® only requires a few seconds to measure a single link; ii) safety: contactless measurement at distances of two metres; and, iii) reduced environmental concerns: SeaVision® is an electro-optical piece of equipment.

Subject to successful trials and acceptance by certifying authorities, Kraken’s laser sensor technology will be offered to the oil and gas and offshore wind markets by Kraken as an inspection service, with applicability for all floating assets permanently moored to the seafloor.

With respect to the oil and gas market, it is estimated that the SeaVision® scanner sensor technology would reduce a mooring chain inspection campaign from approximately ten days to two days, which represents a significant improvement in efficiency and cost.

The technology is also of relevance for the upcoming market of floating wind farms. Each floating wind farm is expected to have over 50 mooring legs per farm, which is five times more than an oil and gas floating facility. Offshore wind is expected to see significant growth and floating wind farms will create new growth opportunities for this technology. According to industry analysts, there are currently 50 floating units in projects under development out to 2022, worldwide, but that number could increase to 300 floating wind turbines by 2025 and over 1,500 by 2030, a fivefold increase. The global floating wind market has enormous potential and a cost-effective mooring chain inspection tool is one of the technology gaps identified by floating wind farm operators.

 Source

Related Articles


Changing Scene

  • Andreas Sobotta to Assume Role of Vice President North and South America for Pilz Automation

    Andreas Sobotta to Assume Role of Vice President North and South America for Pilz Automation

    Pilz Automation Safety Canada L.P. announces that their long-term CEO and GM, Andreas Sobotta, will assume the role of Vice President North and South America, effective immediately. He will still work from the Canadian office in Mississauga and visit all other subsidiaries in North and South America. Pilz will take their time to find a… Read More…

  • SEW-Eurodrive: MAXOLUTION System Solutions

    SEW-Eurodrive: MAXOLUTION System Solutions

    Whether in production or logistics operations, MAXOLUTION is synonymous with innovation in factory automation – across all industries and worldwide – helping you achieve your vision of an adaptable and resilient lean smart factory. Under the MAXOLUTION brand, SEW-EURODRIVE creates customized solutions for cutting-edge materials handling technology – from the shop floor through to IT.… Read More…


Sponsored Content
The Easy Way to the Industrial IoT

The way to the Industrial IoT does not have to be complicated. Whether access to valuable data is required or new, data-driven services are to be generated, Weidmuller enables its customers to go from data to value the easy way. Weidmuller’s comprehensive and cutting-edge IIoT portfolio applies to greenfield and brownfield applications. Weidmuller offers components and solutions from data acquisition, data pre-processing, data communication and data analysis.

Visit Weidmuller’s Industrial IoT Portfolio.


ADVANCED Motion Controls Takes Servo Drives to New Heights (and Depths) with FlexPro Extended Environment Product Line

Advanced Motion Controls is proud to announce the addition of six new CANopen servo drives with Extended Environment capabilities to their FlexPro line. These new drives join AMC’s existing EtherCAT Extended Environment FlexPro drives, making the FlexPro line the go-to solution for motion control applications in harsh environments.

Many motion control applications take place in conditions that are less than ideal, such as extreme temperatures, high and low pressures, shocks and vibrations, and contamination. Electronics, including servo drives, can malfunction or sustain permanent damage in these conditions.

Read More


Service Wire Co. Announces New Titles for Key Executives

Bruce Kesler and Mark Gatewood have been given new titles and responsibilities for Service Wire Co.

Bruce Kesler has assumed the role of Senior Director – Business Development. Bruce will be responsible for Service Wire’s largest strategic accounts and our growing Strategic Accounts Team.

Mark Gatewood has been promoted to the role of Vice President – Sales & Marketing. In this role, Gatewood will lead the efforts of Service Wire Company’s entire sales and marketing organization in all market verticals.

Read More


Tri-Mach Announces the Purchase of an Additional 45,000 sq ft. Facility

Tri-Mach Elmira Facility

Recently, Tri-Mach Inc. was thrilled to announce the addition of a new 45,000 sq ft. facility. Located at 285 Union St., Elmira, ON, this facility expands Tri-Mach’s capabilities, allowing them to better serve the growing needs of their customers.

Positioning for growth, this additional facility will allow Tri-Mach to continue taking on large-scale projects, enhance product performance testing, and provide equipment storage for their customers. The building will also be the new home to their Skilled Trades Centre of Excellence.

Read More


JMP Parent Company, CONVERGIX Acquires AGR Automation, Expanding Global Reach

Convergix Automation Solutions has completed the acquisition of AGR Automation (“AGR”), a UK-based provider of custom, high-performance automation design and systems integration primarily to the life sciences industry.

Following Convergix’s acquisitions of JMP Solutions in August 2021 and Classic Design in February 2022, AGR marks the third investment in Crestview’s strategy to build Convergix into a diversified automation solutions provider targeting the global $500+ billion market, with a particular focus on the $70 billion global systems integration and connectivity segments. Financial terms of the transaction were not disclosed.

Read More


Latest Articles

  • Making the Sustainable Transformation of the Process Industry a Success

    Making the Sustainable Transformation of the Process Industry a Success

    By Krystie Johnston and Dr. Manfred Jagiella – Sustainability facilitates opportunity when approached with a mindset to preserve resources and promote circularity. We share one Earth, and it is our global responsibility to care for it for the next generation. Endress+Hauser is one global company that understands this responsibility – and practices it as well.… Read More…

  • Why NOARK’s 12VDC Shunt Trip Coils for MCCBs Make Power Systems Reliable and Safer

    Why NOARK’s 12VDC Shunt Trip Coils for MCCBs Make Power Systems Reliable and Safer

    Circuit breakers are an essential component of any modern electrical system. Designed to protect your home or business from potential overloads or short circuits, these devices are your first line of defense against electrical fires. There are, however, situations where remote tripping of the circuit breaker may be required. It could be for operational reasons,… Read More…