Printing With Precision – Improving Existing High-Speed Equipment

PB 27 JAE logo 400

September 24, 2019

The Scenario

A high-speed printing company had partially completed an upgrade to their equipment. The printing machine used two alternating print heads to produce units at a rate of more than 11/s. Due to the nature of the product, speed, accuracy, and repeatability were extremely important. The process needed to be consistent as any defect would impact production further down the line.

To ensure there were no errors, the units would pass through a vision system designed to detect defects and other irregularities. A mechanical reject system would then remove any defected units from the line. The entire process needed to operate in less than a second with extreme precision.

The partially completed equipment was expected to be installed in the facility, but performance issues meant that improvements needed to be made. The printing company needed to address these issues and retrofit the machine in time for a major upcoming contract.

The Requirements

The printing company had a number of requirements which were communicated with JAE Automation during the initial consultations, including:

  • Improving the speed, performance, and reliability of the partially completed equipment
  • Implementing and installing the equipment in time for scheduled contracts
  • Achieving near 100 percent accuracy and defect detection rates
  • Developing a high-speed reject system that would consistently meet performance requirements

The Engagement

JAE Automation was initially brought in to assist with the setup and implementation of the partially completed printing equipment. The company selected JAE Automation due to the fact that they were a local company with extensive experience in high-speed and mechanically complex automation projects.

Early on in the process, JAE Automation identified and communicated a number of other areas that could be improved upon to enhance the performance of the machine and achieve the speed and accuracy requirements of the company. For example, it was determined that the reject system previously in place was not adequate and would be unable to consistently reject defective units.

The customer agreed to the recommendations and budgets provided by JAE Automation, and contracted them to work on all areas of the machine.

The Solution

JAE Automation designed and delivered a solution that improved and retrofitted the machine. This included improving the control systems, motion controls, safety systems, and packaging systems.

One of the major components of the solution was the reject system designed by JAE Automation, which used high-speed equipment connected to the vision system to immediately remove any defective units from the production line.

The Results

The delivered solution met the accuracy, repeatability, and speed requirements of the customer. With the additional recommendations provided by JAE Automation, the machine achieved better performance and the entire process was greatly improved. Specifically, the reject system achieved rejection rates that were significantly better than the previous system, reducing error rates and ensuring only correctly printed units reached the next stage of the production process.

The equipment was installed and running when the customer needed it for their upcoming projects and contracts, and they were able to continue their business without delays. JAE Automation demonstrated an ability to go above and beyond the initial requirements by successfully retrofitting the existing equipment and making things better.

Source

Related Articles


Changing Scene

  • SEW-Eurodrive: MAXOLUTION System Solutions

    SEW-Eurodrive: MAXOLUTION System Solutions

    Whether in production or logistics operations, MAXOLUTION is synonymous with innovation in factory automation – across all industries and worldwide – helping you achieve your vision of an adaptable and resilient lean smart factory. Under the MAXOLUTION brand, SEW-EURODRIVE creates customized solutions for cutting-edge materials handling technology – from the shop floor through to IT.… Read More…

  • 6 Ways the New maxon Website Enhances Your Experience

    6 Ways the New maxon Website Enhances Your Experience

    maxon develops drives that are among the best in the world. They advance technologies that save lives on Earth, make driving and flying safer, and enable the use of robots in space. Where uncompromising precision and the highest quality standards are crucial for success, their drive systems show what they are made of. Complexity is… Read More…


Sponsored Content
The Easy Way to the Industrial IoT

The way to the Industrial IoT does not have to be complicated. Whether access to valuable data is required or new, data-driven services are to be generated, Weidmuller enables its customers to go from data to value the easy way. Weidmuller’s comprehensive and cutting-edge IIoT portfolio applies to greenfield and brownfield applications. Weidmuller offers components and solutions from data acquisition, data pre-processing, data communication and data analysis.

Visit Weidmuller’s Industrial IoT Portfolio.


ADVANCED Motion Controls Takes Servo Drives to New Heights (and Depths) with FlexPro Extended Environment Product Line

Advanced Motion Controls is proud to announce the addition of six new CANopen servo drives with Extended Environment capabilities to their FlexPro line. These new drives join AMC’s existing EtherCAT Extended Environment FlexPro drives, making the FlexPro line the go-to solution for motion control applications in harsh environments.

Many motion control applications take place in conditions that are less than ideal, such as extreme temperatures, high and low pressures, shocks and vibrations, and contamination. Electronics, including servo drives, can malfunction or sustain permanent damage in these conditions.

Read More


Service Wire Co. Announces New Titles for Key Executives

Bruce Kesler and Mark Gatewood have been given new titles and responsibilities for Service Wire Co.

Bruce Kesler has assumed the role of Senior Director – Business Development. Bruce will be responsible for Service Wire’s largest strategic accounts and our growing Strategic Accounts Team.

Mark Gatewood has been promoted to the role of Vice President – Sales & Marketing. In this role, Gatewood will lead the efforts of Service Wire Company’s entire sales and marketing organization in all market verticals.

Read More


Tri-Mach Announces the Purchase of an Additional 45,000 sq ft. Facility

Tri-Mach Elmira Facility

Recently, Tri-Mach Inc. was thrilled to announce the addition of a new 45,000 sq ft. facility. Located at 285 Union St., Elmira, ON, this facility expands Tri-Mach’s capabilities, allowing them to better serve the growing needs of their customers.

Positioning for growth, this additional facility will allow Tri-Mach to continue taking on large-scale projects, enhance product performance testing, and provide equipment storage for their customers. The building will also be the new home to their Skilled Trades Centre of Excellence.

Read More


JMP Parent Company, CONVERGIX Acquires AGR Automation, Expanding Global Reach

Convergix Automation Solutions has completed the acquisition of AGR Automation (“AGR”), a UK-based provider of custom, high-performance automation design and systems integration primarily to the life sciences industry.

Following Convergix’s acquisitions of JMP Solutions in August 2021 and Classic Design in February 2022, AGR marks the third investment in Crestview’s strategy to build Convergix into a diversified automation solutions provider targeting the global $500+ billion market, with a particular focus on the $70 billion global systems integration and connectivity segments. Financial terms of the transaction were not disclosed.

Read More


Latest Articles

  • Making the Sustainable Transformation of the Process Industry a Success

    Making the Sustainable Transformation of the Process Industry a Success

    By Krystie Johnston and Dr. Manfred Jagiella – Sustainability facilitates opportunity when approached with a mindset to preserve resources and promote circularity. We share one Earth, and it is our global responsibility to care for it for the next generation. Endress+Hauser is one global company that understands this responsibility – and practices it as well.… Read More…

  • Why NOARK’s 12VDC Shunt Trip Coils for MCCBs Make Power Systems Reliable and Safer

    Why NOARK’s 12VDC Shunt Trip Coils for MCCBs Make Power Systems Reliable and Safer

    Circuit breakers are an essential component of any modern electrical system. Designed to protect your home or business from potential overloads or short circuits, these devices are your first line of defense against electrical fires. There are, however, situations where remote tripping of the circuit breaker may be required. It could be for operational reasons,… Read More…