German Technology Day, Hosted by Rittal, Eplan, Wago and Pilz

November 26, 2019

On November 19, 2019 The German Technology Day hosted by Rittal, Eplan, Wago and Pilz was held in Mississauga. The event showcased a unique conversion of 4 companies. Something that strongly resembles the collaborative efforts German companies have largely embraced and is often showcased in European shows. Although, it has yet to be fully embraced in North America.

The collaborative event allowed each company to showcase its own solutions, both new and upcoming as well as complement the ways in which the companies support and deliver solutions achieved by working together.

The event was held in two half day sessions (with another full day also held in Kitchener) and saw a wide variety of engineers, integrators, panel builders and end-users in attendance. The event had a small show floor where each company exhibited and allowed hands-on access to many of its products, and included demonstrations of precise wire-cutting, stripping and crimping tools, complete hygienic enclosure in an active washdown scenario, machine safety applications and data monitoring capabilities and IIoT Cloud storage solutions.

The event also hosted direct seminars hosted by each company that took a deeper approach to product understanding and solutions offered. The presentations were focused on each company, but the theme of effective operations and safety were core throughout.

Rittal’s presentation focused on the Vlaue Plan for its customers and the ways in which it is developing solutions to serve those working with enclosures and complete panel builds. In this manner Rittal (and Eplan) focused efforts on learning about standard panel build inefficiencies and general build timeframes. On average they determined a panel build takes 58 hours if done entirely by hand. If you employ a semi-auto build process this can go down to 38 hours, or right down to 24 if using a fully automated system. But what is a fully automated system? Well, this includes efficient panel design (such as Eplan offers), automated panel cutouts, automated wire preparation and automated and precise DIN rail cutting. In fact, the preparation of wires has been identified as the most time-consuming process, and can have negative impacts on workers, who have traditionally had to manually cut and prepare cables. Not to mention, even if highly accurate there is always human error and waste, a factor that is eliminated with automated systems.

Eplan’s presentation fit very well and covered a fair amount of similar ideas and design elements to Rittal but approached the subject from a different angle. Eplan focused more deeply on the time saving and efficiency achieved through accurate design. Considering that wire prep was identified as the most time-consuming part of the process, utilizing accurate panel design makes it very clear for builders what is needed. Designs can show the optimal route for all cables and the exact lengths needed to complete the connection. In this way a human can cut required cables fairly accurately, but again there will always be some degree of error and wasted or overused product. A fully automated system can read right from Eplan designs, cut your cables to exact length, strip and crimp connectors on and even direct print labels onto the wire. Panel builders in this scenario are now focused on building the panel rather than going through extensive preparation work.

Wago’s presentation built upon the wire focus presented by Rittal and Eplan by presenting the origins of their spring clamp technology (Wago was the first to develop this), and that they have now developed over 20,000 products using this technology. Wago presented again the timesaving and efficiency offered through their clamping design and the ease of use design they have developed for various applications, which are designated by clour (ie. Grey is for rugged applications; blue is for process control…). The primary focus, however, was not on the physical aspects of their controllers but their ability to gain IIoT Cloud access with Ignition SCADA using Sparkplug Protocol. In this manner collected data allowed for detailed projections of operations and allowed for monitoring of production levels, physical assets and operating efficiencies, all a primary focus for those implanting automation solutions.

Pilz, as should be expected, focused on safety, and approached this by first addressing the trends and focus of developing cyber-physical systems and the advantages they provide. The core drive for Pilz is creating cyber-physical systems through products designed to protect operators and products designed to protect machines from internal misuse and increasingly from cyberattack. The products presented are certainly addressing the two primary concerns on the minds of operators today, but Pilz has taken this further by recognizing products are only piece of the puzzle, and that those implementing, and monitoring safety products require deeper knowledge. In this way, Pilz has developed extensive training solutions to educate on both their products but also on the wider threats that are infiltrating industrial applications. Two of their primary training courses are the Certified Machine Safety Expert (CSME) course and the more recently developed Robot Safety Training course.

Finally, the event was capped by a keynote presentation held midday by Gurvinder Chopra, of Electro-Federation Canada, who spoke about the synergy between innovation and standardization. His discussion reinforced the key benefits of collaboration and developing synergies that benefit the industry.

Overall the German Technology Day was extremely valuable for those in attendance by providing a unique look into the collaborative efforts of companies and the value that such efforts can provide to those working with automation and control applications within Canada.

Related Articles


Changing Scene

  • Andreas Sobotta to Assume Role of Vice President North and South America for Pilz Automation

    Andreas Sobotta to Assume Role of Vice President North and South America for Pilz Automation

    Pilz Automation Safety Canada L.P. announces that their long-term CEO and GM, Andreas Sobotta, will assume the role of Vice President North and South America, effective immediately. He will still work from the Canadian office in Mississauga and visit all other subsidiaries in North and South America. Pilz will take their time to find a… Read More…

  • SEW-Eurodrive: MAXOLUTION System Solutions

    SEW-Eurodrive: MAXOLUTION System Solutions

    Whether in production or logistics operations, MAXOLUTION is synonymous with innovation in factory automation – across all industries and worldwide – helping you achieve your vision of an adaptable and resilient lean smart factory. Under the MAXOLUTION brand, SEW-EURODRIVE creates customized solutions for cutting-edge materials handling technology – from the shop floor through to IT.… Read More…


Sponsored Content
The Easy Way to the Industrial IoT

The way to the Industrial IoT does not have to be complicated. Whether access to valuable data is required or new, data-driven services are to be generated, Weidmuller enables its customers to go from data to value the easy way. Weidmuller’s comprehensive and cutting-edge IIoT portfolio applies to greenfield and brownfield applications. Weidmuller offers components and solutions from data acquisition, data pre-processing, data communication and data analysis.

Visit Weidmuller’s Industrial IoT Portfolio.


ADVANCED Motion Controls Takes Servo Drives to New Heights (and Depths) with FlexPro Extended Environment Product Line

Advanced Motion Controls is proud to announce the addition of six new CANopen servo drives with Extended Environment capabilities to their FlexPro line. These new drives join AMC’s existing EtherCAT Extended Environment FlexPro drives, making the FlexPro line the go-to solution for motion control applications in harsh environments.

Many motion control applications take place in conditions that are less than ideal, such as extreme temperatures, high and low pressures, shocks and vibrations, and contamination. Electronics, including servo drives, can malfunction or sustain permanent damage in these conditions.

Read More


Service Wire Co. Announces New Titles for Key Executives

Bruce Kesler and Mark Gatewood have been given new titles and responsibilities for Service Wire Co.

Bruce Kesler has assumed the role of Senior Director – Business Development. Bruce will be responsible for Service Wire’s largest strategic accounts and our growing Strategic Accounts Team.

Mark Gatewood has been promoted to the role of Vice President – Sales & Marketing. In this role, Gatewood will lead the efforts of Service Wire Company’s entire sales and marketing organization in all market verticals.

Read More


Tri-Mach Announces the Purchase of an Additional 45,000 sq ft. Facility

Tri-Mach Elmira Facility

Recently, Tri-Mach Inc. was thrilled to announce the addition of a new 45,000 sq ft. facility. Located at 285 Union St., Elmira, ON, this facility expands Tri-Mach’s capabilities, allowing them to better serve the growing needs of their customers.

Positioning for growth, this additional facility will allow Tri-Mach to continue taking on large-scale projects, enhance product performance testing, and provide equipment storage for their customers. The building will also be the new home to their Skilled Trades Centre of Excellence.

Read More


JMP Parent Company, CONVERGIX Acquires AGR Automation, Expanding Global Reach

Convergix Automation Solutions has completed the acquisition of AGR Automation (“AGR”), a UK-based provider of custom, high-performance automation design and systems integration primarily to the life sciences industry.

Following Convergix’s acquisitions of JMP Solutions in August 2021 and Classic Design in February 2022, AGR marks the third investment in Crestview’s strategy to build Convergix into a diversified automation solutions provider targeting the global $500+ billion market, with a particular focus on the $70 billion global systems integration and connectivity segments. Financial terms of the transaction were not disclosed.

Read More


Latest Articles

  • Making the Sustainable Transformation of the Process Industry a Success

    Making the Sustainable Transformation of the Process Industry a Success

    By Krystie Johnston and Dr. Manfred Jagiella – Sustainability facilitates opportunity when approached with a mindset to preserve resources and promote circularity. We share one Earth, and it is our global responsibility to care for it for the next generation. Endress+Hauser is one global company that understands this responsibility – and practices it as well.… Read More…

  • Why NOARK’s 12VDC Shunt Trip Coils for MCCBs Make Power Systems Reliable and Safer

    Why NOARK’s 12VDC Shunt Trip Coils for MCCBs Make Power Systems Reliable and Safer

    Circuit breakers are an essential component of any modern electrical system. Designed to protect your home or business from potential overloads or short circuits, these devices are your first line of defense against electrical fires. There are, however, situations where remote tripping of the circuit breaker may be required. It could be for operational reasons,… Read More…