Panel Builder System Integrator

PB CA Alexander2 400October 7, 2019

By Blake Marchand

Chad Alexander is a Branch Manager with Contact Automation, which provides automation integration and control services for the Oil & Gas industry throughout Western Canada and Northwestern United States. Their services include: Consultation and Integration of Automated Control Systems, Panel Development and Fabrication, SCADA System Design and Maintenance, HMI Development, Electronic Product Innovation, and Site Commissioning with Start-up Assistance.

In the interview below Mr. Alexander provides his perspective on the industry, while discussing his career, technology in the Oil & Gas industry, and some interesting projects for Contact Automation. 

With respect to the latter, Contact Automation is looking to reduce costs and improve functionality for their clients by upgrading outdated systems.

As Chad mentions below, Contact Automation primarily operates in the Oil & Gas industry, while also doing work in Manufacturing, Food, and Municipal Water & Wastewater. They recently upgraded a SCADA solution using Ignition SCADA to optimize the water and wastewater system for Sylvan Lake by implementing a MQTT protocol.

“Sylvan’s SCADA network was originally designed as a serial radio network. With legacy equipment almost 20 years old and numerous configurations, the system was inflexible and didn’t allow users to communicate reliably with remote stations,” Systems Integrator and PLC programmer, Crayton White explained in the project case study.

“In a nutshell, the town no longer trusted the communications system in place to monitor and manage their critical utility infrastructure,” explained White. “The growing number of system-wide errors, manual processes and old technology was hampering their goal of achieving a fully automated solution.” Sylvan was running a system that had begun to show its age, particularly with added stress caused by the town’s elevation. As a result, it was becoming increasingly costly to do field maintenance on all of their assets. 

“Sylvan Lake can now trust that the system they use to manage their water operations and the data it generates is reliable,” said White. “They can communicate with their entire team from a central location, have reduced the points of failure and eliminated the need to physically drive from station to station to check and monitor their infrastructure multiple times a day. The communications reliability of field radios is nearly 100 percent.”

Chad noted that they are trying to implement MQTT systems in the Oil & Gas industry to a similar effect as with Sylvan Lake’s water treatment systems.

“Adding MQTT at the edge makes the field stations smarter, while keeping the system’s overall footprint and bandwidth requirements small,” said White.

The simplicity of the technology makes it an economically viable upgrade option that also improves performance and maintenance.

“Typically, the more hardware you put in, the costs to purchase and maintain the system go up. FreeWave and Ignition gave us the ability to migrate and upgrade each station to achieve IoT at the edge by simply replacing the radio hardware.”

Chad noted they often run into 20-year old outdated systems that are quickly becoming sub-optimal. Particularly, with the uncertain economic landscape of Western Canada’s Oil & Gas industry, implementing more efficient, higher functioning systems can allow their clients to reduce costs and be more competitive. 

Can you tell me a bit about your career thus far, what has led you to your current position; perhaps touching on what got you interested in pursuing a career in automation?  

I received a diploma in Electronics Engineering from SAIT (South Alberta Institute of Technology). Upon graduation I got into the Instrumentation field and worked towards an Instrumentation Journeyman ticket.  I worked for a number of years for Petro-Canada where I started working towards an Electrical Journeyman ticket. I then went back to the contractor services field doing Instrumentation/Electrical and programming work on Gas Compressors. 

I moved to Contact Automation in 2010 and started programming full time. My interest in PLC programming came when I was an Instrumentation Apprentice in the late 90’s. A variety of factors (primarily picking up a second Journeyman certificate) led me away from my end goal of programming. At this point in time, I would not go back to the tools. I enjoy my career as it brings numerous challenges and it is always keeping me engaged.

What is your day-to-day like as a Branch Manager for Contact Automation? What challenges you, what interests you, how does it differ from your previous roles?  

Scheduling work and coordinating with clients is the biggest challenge. This is due to co-ordination requirements with other trades and other scheduled work. In our industry, deadlines and schedules are tight and often times this causes conflicting schedules.

Personally, I am interested in automation because of the challenge the work brings. It is constantly changing and constantly evolving, which creates a dynamic that I am driven towards. I cannot do a job that is repetitive and boring; I found over my career that I needed to be engaged and challenged to be happy. 

My previous experience in the Instrumentation/Electrical field found that over time the tasks become very repetitive and led to boredom. With the automation field, a programmer is constantly improving their logic and making enhancements to improve the final product.  If a programmer is bored, then they are not evolving with technology or self-improvement.

Are there any projects you have worked on that have been particularly fascinating for you? 

The largest facility I have completed to date evolved over a 4-year time span. This project has created a pretty good sense of pride. I have received a lot of compliments on the HMI and how user friendly it is for operations to run the facility from.  

The project that is fascinating is the current project that I am on. Which is making synthetic diesel fuel very economically when compared to conventional methods. It is very challenging and has great future prospects for Canada, USA and worldwide.

With respect to industry trends or technologies, what is interesting to you right now/what’s pertinent to what Contact Automation does? 

Our industry (Oil and Gas in Western Canada) lags technology by a number of years. This is primarily due to reliability and economics. We have been involved in some experiments to reduce cost and make improvements to efficiency. However, the majority of our projects continue to be implemented with wiring methods and technology that is 20 years old. 

My co-worker has been heavily involved with developing SCADA Ignition software MQTT protocol integration into a FreeWave radio. There is a white paper written about the project. We are actively looking to incorporate MQTT into future projects as we see a large benefit to utilizing the protocol.

Building off the previous question, is there anything you see as becoming more prominent 5-10 years down the road? Particularly with respect to what Contact Automation does.  

Definitely the MQTT protocol with respect to SCADA integration. It would be beneficial in a large plant facility where some Maintenance Management software was incorporated into the automation control system. I personally see the future becoming more connected into the Automation Control systems. Think industrial IoT. 

Can you tell me a bit about Contact Automation? What industries/industry sectors take up the majority of your work?  

We are primarily serving the Oil and Gas Industry. A smaller section of the market for us is the manufacturing, food, water/wastewater and refining industries.

What is an ideal project for you? 

My personal preference is the larger projects or projects that utilize more technology. 

What are the keys to your success as Branch Manager and, ultimately, the success of Contact Automation? 

Maintaining customer service. As an Automation contract services company, we are open 24 hours a day and 7 days a week, which is not typical for Automation companies.  I personally take great pride in the work I do. With jobs that we are tasked with designing the automation system; I treat them as though we are the ones who own the asset and ensure the automation system is appropriate from a logistics and economics perspective.

Contact Automation

Changing Scene

  • Prev
Pilz will be hosting several conferences for their 2020 Virtual Trade Show starting on Tuesday May ...
Koch Engineered Solutions (KES), a unit of Koch Industries Inc., recently announced it has acquired ...
Festo Canada is pleased to announce Electrozad, the largest independently owned electrical ...
Littelfuse, Inc., a global manufacturer of technologies in circuit protection, power control and ...
Allied Electronics & Automation has added more trusted suppliers to its 300-strong network, ...
Rockwell Automation announced that it has signed an agreement to acquire privately held Avnet Data ...
January is traditionally a month for new hope and new energy to meet life and business goals. But ...
Moxa Inc. recently introduced its Industrial Network Defense Solution, which is specially designed ...

One of Canada’s largest wastewater treatment plants at Annacis Island provides secondary treatment to approximately 175 billion litres of wastewater every year for over 1 million residents in 14 municipalities. After almost 20 years in operation, the variable frequency drives supporting the critical pumping systems for the primary treatment and secondary treatment facilities had to be replaced to ensure that the plant’s high operational availability and reliability will not be compromised in serving the plant, the surrounding municipalities and the environment. Metro Vancouver Regional District chose to deploy Rittal’s enclosure and power distribution solutions with E-plan software to efficiently support vital infrastructure improvements by reducing equipment replacement times and thereby minimizing risk to plant operations.

Latest Articles

  • Prev
The phrase “up-time” is an oft-repeated phrase for IT professionals, reflecting the fact that a key ...
The International Society of Automation (ISA) recently served as the partner for an independent ...
A local manufacturer intended to complete the setup and installation of a high-speed ...
For three decades, Endress+Hauser Canada has been building strong relationships with customers ...
  I think many of us right now are caught at a point where we are either looking back at ...
Electromate has been recognized as the 28th Best Workplace in Canada. This list, and related ...
If you are interested or in the midst of switching from making cars, beverages, apparel or ...
During these weeks, with the COVID-19 outbreaks, it has been possible to observe how certain ...
Brock Solutions is pleased to announce the recent award by the Region of Peel of the Clarkson and ...

Coming Soon: The new EPLAN Pro Panel, Version 2.8, Virtual control cabinet engineering – fully matured

The new EPLAN Pro Panel, Version 2.8 is making its first big appearance at the SPS IPC Drives. The software for virtual 3D control cabinet engineering is characterised by its expanded flexibility, surprising users with a brand new 4K-capable user interface. It’s also causing decision-makers to sit up and take notice: during live, joint presentations in Nuremberg, EPLAN and Rittal will be introducing a whole series of innovations in the context of control cabinet engineering.

These include complementary software solutions for engineering and preplanning operations, innovative system technology for housings, power distribution and climate-control systems, automation technologies, and digital assistance systems for integrated automation of manufacturing processes. EPLAN and Rittal are thereby positioning themselves as solutions providers offering integrated solutions for optimising processes in control cabinet engineering: combined machine/hardware and software solutions, product-accompanying data and comprehensive on-site process integration services for customers.

Read More: < ...

Product News

  • Prev
Hammond Power Solutions Inc. (HPS), North America's leading manufacturer of dry-type transformers ...
  Hammond Power Solutions Inc. (HPS) has announced the availability of a line extension of ...
The new multifunctional MACX-TR timer relays from Phoenix Contact now make simple time control ...
The PTFIX product family from Phoenix Contact has now been extended to include a nominal cross ...
For the very first time, manual deburring processes can be automated with the robot deburring tool ...
At the show, an M-710iC/45M robot used the 3DV/1600 vision sensor to quickly find and snap boxes of ...
Industrial producers can now improve their network resiliency by using primary and backup adapters ...
Festo is meeting the need of the North American automotive sector for a powerful yet flexible valve ...
AMT series encoders from CUI Devices are advanced capacitive encoders with a variety of uses. AMT ...
Seifert SoliTherm Thermoelectric Coolers from AutomationDirect use the Peltier Effect for ...
Kerrwil Publications Great Place to Work. Certified December 2019 - December 2020

538 Elizabeth Street, Midland,Ontario, Canada L4R2A3 +1 705 527 7666
©2020 All rights reserved

Use of this Site constitutes acceptance of our Privacy Policy (effective 1.1.2016)
The material on this site may not be reproduced, distributed, transmitted, cached or otherwise used, except with the prior written permission of Kerrwil