Harting Delivers the Design for the Next Generation of Connectors

Harting

 

September 28, 2018

HARTING is driving the development of the standardisation of the new Single Pair Ethernet (SPE) technology forward. Now, in a multi-stage selection process, international standardisation committees have decided in favour of the Technology Group’s SPE mating face. “We’re pleased with this decision. This also ensures planning security for the developers of new devices or sensor/actuator technology,” as Ralf Klein, Managing Director of HARTING Electronics stated.

Single Pair Ethernet is a new Ethernet technology that requires only one pair of wires (instead of four pairs) to transfer data and power. This technology, which is driven by the automotive industry, is also gaining increasing importance in automation technology, where its development is advancing in targeted manner. Thanks to its simplicity and an associated reduction in weight, space requirements and installation effort, a great future is seen for the technology within the industrial sector, automation technology and the rail industry, among others.

SPE now makes it also possible to implement digitisation down to the field level, i.e. end-to-end IP-based communication. Equipping simple sensors or cameras, reader and identification devices, etc. with Ethernet interfaces supports the implementation of Integrated Industry and IIoT.

End-to-end compatibility of devices, cables and connectors

The end-to-end compatibility of devices, cables and connectors is a prerequisite for the widespread use and consequently the successful marketing of SPE technology. This is ensured by international standardisation (ISO/IEC and IEEE). Since the beginning of the year, there has been an internationally drafted selection process for the cabling and selection of standard SPE mating faces via ISO/IEC involving more than 20 national expert committees. As a result of this selection, two mating faces have prevailed:

  • For building wiring, the mating face according to IEC 63171-1: this mating face is based on the proposal from CommScope
  • For industrial and industry-related applications, the mating face according to IEC 61076-3-125: this mating face is based on the HARTING proposal

Based on this mating face, HARTING is preparing a comprehensive product portfolio for the industrial sector. The technology had been driven forward in the past two years in close cooperation with customers. SPE connector concepts from HARTING were initially presented at SPS 2016 in Nuremberg.

For more information https://www.harting.com/DE/en-gb/news/company/harting-delivers-design-next-generation-connectors

 

 

 

Related Articles


Changing Scene

  • Andreas Sobotta to Assume Role of Vice President North and South America for Pilz Automation

    Andreas Sobotta to Assume Role of Vice President North and South America for Pilz Automation

    Pilz Automation Safety Canada L.P. announces that their long-term CEO and GM, Andreas Sobotta, will assume the role of Vice President North and South America, effective immediately. He will still work from the Canadian office in Mississauga and visit all other subsidiaries in North and South America. Pilz will take their time to find a… Read More…

  • SEW-Eurodrive: MAXOLUTION System Solutions

    SEW-Eurodrive: MAXOLUTION System Solutions

    Whether in production or logistics operations, MAXOLUTION is synonymous with innovation in factory automation – across all industries and worldwide – helping you achieve your vision of an adaptable and resilient lean smart factory. Under the MAXOLUTION brand, SEW-EURODRIVE creates customized solutions for cutting-edge materials handling technology – from the shop floor through to IT.… Read More…


Sponsored Content
The Easy Way to the Industrial IoT

The way to the Industrial IoT does not have to be complicated. Whether access to valuable data is required or new, data-driven services are to be generated, Weidmuller enables its customers to go from data to value the easy way. Weidmuller’s comprehensive and cutting-edge IIoT portfolio applies to greenfield and brownfield applications. Weidmuller offers components and solutions from data acquisition, data pre-processing, data communication and data analysis.

Visit Weidmuller’s Industrial IoT Portfolio.


ADVANCED Motion Controls Takes Servo Drives to New Heights (and Depths) with FlexPro Extended Environment Product Line

Advanced Motion Controls is proud to announce the addition of six new CANopen servo drives with Extended Environment capabilities to their FlexPro line. These new drives join AMC’s existing EtherCAT Extended Environment FlexPro drives, making the FlexPro line the go-to solution for motion control applications in harsh environments.

Many motion control applications take place in conditions that are less than ideal, such as extreme temperatures, high and low pressures, shocks and vibrations, and contamination. Electronics, including servo drives, can malfunction or sustain permanent damage in these conditions.

Read More


Service Wire Co. Announces New Titles for Key Executives

Bruce Kesler and Mark Gatewood have been given new titles and responsibilities for Service Wire Co.

Bruce Kesler has assumed the role of Senior Director – Business Development. Bruce will be responsible for Service Wire’s largest strategic accounts and our growing Strategic Accounts Team.

Mark Gatewood has been promoted to the role of Vice President – Sales & Marketing. In this role, Gatewood will lead the efforts of Service Wire Company’s entire sales and marketing organization in all market verticals.

Read More


Tri-Mach Announces the Purchase of an Additional 45,000 sq ft. Facility

Tri-Mach Elmira Facility

Recently, Tri-Mach Inc. was thrilled to announce the addition of a new 45,000 sq ft. facility. Located at 285 Union St., Elmira, ON, this facility expands Tri-Mach’s capabilities, allowing them to better serve the growing needs of their customers.

Positioning for growth, this additional facility will allow Tri-Mach to continue taking on large-scale projects, enhance product performance testing, and provide equipment storage for their customers. The building will also be the new home to their Skilled Trades Centre of Excellence.

Read More


JMP Parent Company, CONVERGIX Acquires AGR Automation, Expanding Global Reach

Convergix Automation Solutions has completed the acquisition of AGR Automation (“AGR”), a UK-based provider of custom, high-performance automation design and systems integration primarily to the life sciences industry.

Following Convergix’s acquisitions of JMP Solutions in August 2021 and Classic Design in February 2022, AGR marks the third investment in Crestview’s strategy to build Convergix into a diversified automation solutions provider targeting the global $500+ billion market, with a particular focus on the $70 billion global systems integration and connectivity segments. Financial terms of the transaction were not disclosed.

Read More


Latest Articles

  • Making the Sustainable Transformation of the Process Industry a Success

    Making the Sustainable Transformation of the Process Industry a Success

    By Krystie Johnston and Dr. Manfred Jagiella – Sustainability facilitates opportunity when approached with a mindset to preserve resources and promote circularity. We share one Earth, and it is our global responsibility to care for it for the next generation. Endress+Hauser is one global company that understands this responsibility – and practices it as well.… Read More…

  • Why NOARK’s 12VDC Shunt Trip Coils for MCCBs Make Power Systems Reliable and Safer

    Why NOARK’s 12VDC Shunt Trip Coils for MCCBs Make Power Systems Reliable and Safer

    Circuit breakers are an essential component of any modern electrical system. Designed to protect your home or business from potential overloads or short circuits, these devices are your first line of defense against electrical fires. There are, however, situations where remote tripping of the circuit breaker may be required. It could be for operational reasons,… Read More…