Schneider Electric Guardian Compressor Control Solutions

Schneider

December 19, 2017

Schneider’s Guardian is recognized as a leading automation and control solution for compression and industrial process control. Guardian’s extensive installed base includes compressor, pump and generator control panels and solutions in North America and abroad. Schneider’s team of experienced engineers and technologists design, build and service a complete rage of Guardian products suited to your business needs.

For the full product line up see:

https://www.schneider-electric.ca/en/product-range/62985-guardian-compressor-control-solutions?parent-category-id=87194&parent-subcategory-id=87195&filter=business-1-industrial-automation-and-control&subNodeId=3448267334en_CA

Related Articles

Rockwell Automation: Panduit Pre-Configured IDF with Access Control

Rockwell Automation: Panduit Pre-Configured IDF with Access Control

The Panduit Pre-Configured Industrial Distribution Frame (IDF) with SmartZone G5 Access Control is engineered to deploy and protect 19-inch rack mount switches on the factory floor in an industrial network. Consistent design, equipment placement, and cable management minimize engineering and installation time resulting in faster implementation.

 

 

 

Littelfuse Launches 1500 Volt Solar Fuses Rated 35 to 60 Amperage

Littelfuse Launches 1500 Volt Solar Fuses Rated 35 to 60 Amperage

Littelfuse, Inc., a global manufacturer of technologies in circuit protection, power control, and sensing, recently announced the expansion of its SPXI series in-line solar fuses to include 35 to 60 amperage models. Designed to integrate into in-line assemblies within a wire harness, these 1500 V DC solar fuses protect photovoltaic (PV) installations from overloads and short circuits to minimize damage to solar panels.

 

 

 

EXAIR Announces Upgraded Certification for NEMA 4 Cabinet Coolers

EXAIR Announces Upgraded Certification for NEMA 4 Cabinet Coolers

EXAIR products are engineered to improve efficiency while increasing facility safety in the process. This ongoing focus on standards and personnel safety has earned EXAIR NEMA 4 Cabinet Cooler® Systems an upgraded CE certification under their latest safety directives. Performed by an independent laboratory, this new certification not only provides added utility in processes that…

Changing Scene

  • Wesco Opens State-of-the-Art Facility in Eastern Canada to Support Influx of Megaprojects in the Region

    Wesco Opens State-of-the-Art Facility in Eastern Canada to Support Influx of Megaprojects in the Region

    Wesco International has recently announced the grand opening of a new state-of-the-art facility on Higney Avenue in Dartmouth, Nova Scotia, Canada, making this the largest facility of any distributor in the Atlantic region. The new building, facilitated by Touchette Real Estate, a division of Groupe Touchette, will feature Wesco’s comprehensive suite of services and solutions including… Read More…

  • PataBid Nominated for Canadian Choice Award in Software Services

    PataBid Nominated for Canadian Choice Award in Software Services

    PataBid is proud to announce its nomination for a Canadian Choice Award in the Software Services category. This recognition highlights PataBid’s commitment to supporting the electrical contracting community across Canada by providing innovative estimating software solutions that streamline estimating processes and ensure predictable and profitable projects. Read More…

Sponsored Content
The Easy Way to the Industrial IoT

The way to the Industrial IoT does not have to be complicated. Whether access to valuable data is required or new, data-driven services are to be generated, Weidmuller enables its customers to go from data to value the easy way. Weidmuller’s comprehensive and cutting-edge IIoT portfolio applies to greenfield and brownfield applications. Weidmuller offers components and solutions from data acquisition, data pre-processing, data communication and data analysis.

Visit Weidmuller’s Industrial IoT Portfolio.

ADVANCED Motion Controls Takes Servo Drives to New Heights (and Depths) with FlexPro Extended Environment Product Line

Advanced Motion Controls is proud to announce the addition of six new CANopen servo drives with Extended Environment capabilities to their FlexPro line. These new drives join AMC’s existing EtherCAT Extended Environment FlexPro drives, making the FlexPro line the go-to solution for motion control applications in harsh environments.

Many motion control applications take place in conditions that are less than ideal, such as extreme temperatures, high and low pressures, shocks and vibrations, and contamination. Electronics, including servo drives, can malfunction or sustain permanent damage in these conditions.

Read More

Service Wire Co. Announces New Titles for Key Executives

Bruce Kesler and Mark Gatewood have been given new titles and responsibilities for Service Wire Co.

Bruce Kesler has assumed the role of Senior Director – Business Development. Bruce will be responsible for Service Wire’s largest strategic accounts and our growing Strategic Accounts Team.

Mark Gatewood has been promoted to the role of Vice President – Sales & Marketing. In this role, Gatewood will lead the efforts of Service Wire Company’s entire sales and marketing organization in all market verticals.

Read More

Tri-Mach Announces the Purchase of an Additional 45,000 sq ft. Facility

Tri-Mach Elmira Facility

Recently, Tri-Mach Inc. was thrilled to announce the addition of a new 45,000 sq ft. facility. Located at 285 Union St., Elmira, ON, this facility expands Tri-Mach’s capabilities, allowing them to better serve the growing needs of their customers.

Positioning for growth, this additional facility will allow Tri-Mach to continue taking on large-scale projects, enhance product performance testing, and provide equipment storage for their customers. The building will also be the new home to their Skilled Trades Centre of Excellence.

Read More

JMP Parent Company, CONVERGIX Acquires AGR Automation, Expanding Global Reach

Convergix Automation Solutions has completed the acquisition of AGR Automation (“AGR”), a UK-based provider of custom, high-performance automation design and systems integration primarily to the life sciences industry.

Following Convergix’s acquisitions of JMP Solutions in August 2021 and Classic Design in February 2022, AGR marks the third investment in Crestview’s strategy to build Convergix into a diversified automation solutions provider targeting the global $500+ billion market, with a particular focus on the $70 billion global systems integration and connectivity segments. Financial terms of the transaction were not disclosed.

Read More

Latest Articles

  • How Advanced X-Ray and AI Inspection Technologies Optimize Quality Control and Reduce Costs in SMT Manufacturing

    How Advanced X-Ray and AI Inspection Technologies Optimize Quality Control and Reduce Costs in SMT Manufacturing

    Explore how Omron’s latest X-Ray machines and AI-driven solutions are setting new standards in manufacturing efficiency and quality control. The manufacturing landscape is swiftly evolving, and Omron is at the forefront with its innovative PCB inspection machines. These systems offer profound insights into SMT production process, enhanced quality control, and can significantly reduce labor costs. Advancements… Read More…

  • KUKA Establishes New Software and Digital Business Segment

    KUKA Establishes New Software and Digital Business Segment

    Software is playing an increasingly important role in mechanical engineering. What used to be mostly solved mechanically is now done by electronics and the associated software. “With KUKA Digital, we are expanding our offering in order to position ourselves broadly for a market with strong growth potential. Our customers need products, solutions and consulting approaches to digitalize… Read More…