New IT LED System Light from Rittal

Rittal

March 7, 2018

The new IT LED system light from Rittal is specially designed for use in server and network enclosures (“IT racks”). With a light output of 600 lumens, it meets all standard requirements for IT racks such as the Rittal TS IT and TE 8000. A transparent plastic cover, integrating Fresnel lenses, provides optimal illumination for an enclosure. It focuses the light so that the entire enclosure is illuminated in a targeted way, even at the bottom. The benefit is that the light reaches exactly those places where it is needed – without being scattered into the exterior.

Quick assembly and easy start-up

The IT system light can be optimally mounted in the IT rack to ensure that no height units are lost within the 482.6 mm (19″) level. It can be mounted vertically and Rittalhorizontally in the enclosure section. The magnetic attachment provided is suitable for enclosure frames without system punchings. This means the lights are quick and easy to install and occupy minimum space. Two different Plug & Play connection cables make for simple and quick installation without the need for a qualified electrician.

The EU version of the connection cable with flat-pin connector can be used in all European countries (except the UK). For international use in a data centre environment, an additional universal cable is available with an IEC C18 connector which is compatible with all standard PDUs (power distribution units).

Rittal

Global usability

The light has an IEC C18 connection cable, UL approval and is designed for a wide-range voltage (100 – 240 V AC, 50/60 Hz), meaning it can be used worldwide. This cuts storage costs and reduces complexity when selecting products.

The new IT LED light with a light output of 600 lumens is available now. In addition to various sizes (600, 900 and 1200 lumens) for industrial enclosures, Rittal now also offers an LED light solution for easy use in IT infrastructure.

Click here to get more details on our website, or contact marketing@rittal.ca

Related Articles

AutomationDirect Adds Capacitive Pushbutton Sensor Switches and Indicators

AutomationDirect Adds Capacitive Pushbutton Sensor Switches and Indicators

Captron SENSORswitches are capacitive pushbuttons which are activated without pressure, using a hand or other parts of the body. The buttons have a determinate sensing distance, which may be altered by varying the approach speed and/or damping factor. A quickly approaching finger will achieve a higher sensing distance than a slowly approaching finger.

 

 

 

Valmet launches a new microwave consistency measurement for pulp and paper makers

Valmet launches a new microwave consistency measurement for pulp and paper makers

Valmet launches a completely redesigned Valmet Microwave Consistency Measurement – Valmet MCA (patent pending) for pulp and paper makers. Valmet MCA is now provided by digital electronics and the new Direct Sweep Detection measurement to offer higher performance measurement sensitivity and accuracy than competing analog designs.

 

 

 

AutomationDirect: CITO StackFlow Series Modular Process Valves & Manifolds

AutomationDirect: CITO StackFlow Series Modular Process Valves & Manifolds

AutomationDirect has added the CITO StackFlow series of modular process valves.  This system of high-flow, robust components can stack together to form a valve bank assembly. Each module includes common inlets at each end and an outlet discharge at the bottom. Manual and solenoid valves are available, as well as distribution blocks that can all be included in the same assembly. Port adapters are sold separately, allowing multiple threaded connection options to the inlet or outlet port. Flow control outlet port adapters allow fine-tuning fluid flow out of the discharge.

Endress+Hauser’s new generation of glass-free pH sensors deliver improved CIP stability

Endress+Hauser’s new generation of glass-free pH sensors deliver improved CIP stability

Endress+Hauser’s new generation of ISFET sensors made with unbreakable PEEK raises the performance bar in glass-free pH measurement. With their new design, these ISFET sensors ­– Memosens CPS47D, CPS77D and CPS97D – offer consistent accuracy, maximum product safety, and much improved clean in place (CIP) stability – up to six times greater CIP stability than the previous generation of ISFET sensors. They are built to perform reliably through at least 25 CIP cycles.

 

 

 

Changing Scene

Sponsored Content
The Easy Way to the Industrial IoT

The way to the Industrial IoT does not have to be complicated. Whether access to valuable data is required or new, data-driven services are to be generated, Weidmuller enables its customers to go from data to value the easy way. Weidmuller’s comprehensive and cutting-edge IIoT portfolio applies to greenfield and brownfield applications. Weidmuller offers components and solutions from data acquisition, data pre-processing, data communication and data analysis.

Visit Weidmuller’s Industrial IoT Portfolio.

ADVANCED Motion Controls Takes Servo Drives to New Heights (and Depths) with FlexPro Extended Environment Product Line

Advanced Motion Controls is proud to announce the addition of six new CANopen servo drives with Extended Environment capabilities to their FlexPro line. These new drives join AMC’s existing EtherCAT Extended Environment FlexPro drives, making the FlexPro line the go-to solution for motion control applications in harsh environments.

Many motion control applications take place in conditions that are less than ideal, such as extreme temperatures, high and low pressures, shocks and vibrations, and contamination. Electronics, including servo drives, can malfunction or sustain permanent damage in these conditions.

Read More

Service Wire Co. Announces New Titles for Key Executives

Bruce Kesler and Mark Gatewood have been given new titles and responsibilities for Service Wire Co.

Bruce Kesler has assumed the role of Senior Director – Business Development. Bruce will be responsible for Service Wire’s largest strategic accounts and our growing Strategic Accounts Team.

Mark Gatewood has been promoted to the role of Vice President – Sales & Marketing. In this role, Gatewood will lead the efforts of Service Wire Company’s entire sales and marketing organization in all market verticals.

Read More

Tri-Mach Announces the Purchase of an Additional 45,000 sq ft. Facility

Tri-Mach Elmira Facility

Recently, Tri-Mach Inc. was thrilled to announce the addition of a new 45,000 sq ft. facility. Located at 285 Union St., Elmira, ON, this facility expands Tri-Mach’s capabilities, allowing them to better serve the growing needs of their customers.

Positioning for growth, this additional facility will allow Tri-Mach to continue taking on large-scale projects, enhance product performance testing, and provide equipment storage for their customers. The building will also be the new home to their Skilled Trades Centre of Excellence.

Read More

JMP Parent Company, CONVERGIX Acquires AGR Automation, Expanding Global Reach

Convergix Automation Solutions has completed the acquisition of AGR Automation (“AGR”), a UK-based provider of custom, high-performance automation design and systems integration primarily to the life sciences industry.

Following Convergix’s acquisitions of JMP Solutions in August 2021 and Classic Design in February 2022, AGR marks the third investment in Crestview’s strategy to build Convergix into a diversified automation solutions provider targeting the global $500+ billion market, with a particular focus on the $70 billion global systems integration and connectivity segments. Financial terms of the transaction were not disclosed.

Read More

Latest Articles

  • Automated Test Equipment (ATE) Revival: Repurposing and Extending the Life of Aging ATE Systems

    Automated Test Equipment (ATE) Revival: Repurposing and Extending the Life of Aging ATE Systems

    Automated Test Equipment (ATE) and Automated Test Systems (ATS) serve the critical purpose of ensuring that electronic devices operate according to specifications in the field. As such, these systems are widely utilized for testing automotive electronics, batteries, telecom infrastructure, renewable energy systems, and consumer electronics. The aerospace and defense sectors also make substantial investments in… Read More…

  • Partner Country Canada at HANNOVER MESSE 2025: The Future’s Here

    Partner Country Canada at HANNOVER MESSE 2025: The Future’s Here

    Canada is Partner Country of HANNOVER MESSE 2025, underscoring the strong economic and political ties between “The True North” and Germany. Canada announced its Partner Country commitment in August 2022 when Canadian Prime Minister Justin Trudeau hosted German Chancellor Olaf Scholz in Canada. Canada’s starring role from 31 March to 4 April 2025 at HANNOVER… Read More…