Danfoss: 50 years of passion for drives

Danfoss

2018 is a special year for Danfoss Drives, and a milestone in the Company’s history. Fifty years ago, Danfoss was the first company to mass-produce AC drives. Since then, Danfoss has been a forerunner in drives technology and digital solutions that enable customers to thrive in a world that is rapidly changing. 

Proud of our past

Danfoss Drives is a company that does things differently. It is unique in that it has always been 100% focused on developing, manufacturing and supplying AC drives. Since 1968, its portfolio of high-quality, application-optimized products and services has been designed to maximize process performance, save the most energy and minimize emissions.

In recognizing the potential of connectivity-, motor- and system independence, Danfoss Drives gives customers the freedom to optimize their systems, and the power to equip their drives to ensure they engineer the best possible AC-drive solutions without compromises, and find the optimum outcome for their challenges.

Prioritizing the present

A 50-year anniversary is a time for celebration. But, it’s also a time to reaffirm the Company’s commitment to its customers and partners, and to demonstrate how Danfoss is continually evolving. Recognizing and addressing the megatrends affecting the world today, the Company is innovating technology that, for example, tackles climate change, helps cope with rapid urbanization, provides successful and sustained water and wastewater management, and bridges the lag between energy generation and consumption. In addition, the latest trends in automation and connectivity are allowing Danfoss to change the way it works to further drive customer success and provide an ultimate, end-to-end, digital experience.

Focusing on the future

Capitalizing on decades of experience, Danfoss Drives is passionate about the future. In 2025, it is estimated that more than 5 billion people (over 50% of the estimated world population) will benefit directly or indirectly from the benefits provided by Danfoss Drives in their everyday lives. The installed base of AC drives will help to save the annual equivalent of 60 hours of global energy consumption.

Danfoss Drives has been around for 50 years, and yet the hopes the vision and the passion of the company and all its employees are still as fresh as they were back in 1968. While celebrating its success, Danfoss Drives will continue to strive for clean water, clean air, clean power and a clean future.

http://www.danfoss.us/newsstories/pe/danfossdrivesturns50/?ref=17179905130#/

Related Articles

Omron

Omron Automation appointment to support the Machine Safety Services Market in Canada

 

Omron Canada Inc. is pleased to announce the appointment of Michael Joaquin to the position of   Safety Services Specialist. Reporting directly to Brett Lupton, Sales Manager, Advanced Sensing &Safety, Michael will be responsible for Omron’s strategic and tactical actions to increase sales within all of Omron’s key industries, which include Automotive, Food, Beverage, Packaging, Pharmaceutical as well as Infrastructure and Government.

 

 

PB 25 Johnson logo 400

Johnson Controls, National Defence Collaborate to Drive CA$3M in Targeted Annual Savings and 23% in Targeted GHG Emissions Cuts Through Green Defence Infrastructure Initiative at CFB Halifax

Johnson Controls, a global provider for smart, healthy and sustainable buildings, recently announced it is collaborating with Canada’s Department of National Defence (DND) to achieve decarbonization and infrastructure improvements designed to improve Defence Team member quality of life and generate long-term utility and maintenance cost efficiencies.

 

 

 

Changing Scene

  • Hubbell Canada Announces Frank Magisano as New Vice President & General Manager

    Hubbell Canada Announces Frank Magisano as New Vice President & General Manager

    Hubbell is thrilled to announce the promotion of Frank Magisano to the position of Vice President & General Manager of Hubbell Canada. Frank joined the Hubbell team in 2001 and has since demonstrated exceptional leadership and expertise across various departments, including engineering, operations, and business development. His comprehensive understanding of the industry and dedication to… Read More…

  • Gescan Announces Strategic Distribution Partnership with ABB Canada

    Gescan Announces Strategic Distribution Partnership with ABB Canada

    Gescan is pleased to announce a new distribution partnership with ABB Motion, renowned for its pioneering solutions in automation and electrification. Gescan will now offer ABB’s high-quality drive solutions in Manitoba and Saskatchewan, making energy-efficient motor control technology more accessible to businesses in the region. “ABB Motion has a long-standing reputation for technological excellence, and… Read More…

Sponsored Content
The Easy Way to the Industrial IoT

The way to the Industrial IoT does not have to be complicated. Whether access to valuable data is required or new, data-driven services are to be generated, Weidmuller enables its customers to go from data to value the easy way. Weidmuller’s comprehensive and cutting-edge IIoT portfolio applies to greenfield and brownfield applications. Weidmuller offers components and solutions from data acquisition, data pre-processing, data communication and data analysis.

Visit Weidmuller’s Industrial IoT Portfolio.

ADVANCED Motion Controls Takes Servo Drives to New Heights (and Depths) with FlexPro Extended Environment Product Line

Advanced Motion Controls is proud to announce the addition of six new CANopen servo drives with Extended Environment capabilities to their FlexPro line. These new drives join AMC’s existing EtherCAT Extended Environment FlexPro drives, making the FlexPro line the go-to solution for motion control applications in harsh environments.

Many motion control applications take place in conditions that are less than ideal, such as extreme temperatures, high and low pressures, shocks and vibrations, and contamination. Electronics, including servo drives, can malfunction or sustain permanent damage in these conditions.

Read More

Service Wire Co. Announces New Titles for Key Executives

Bruce Kesler and Mark Gatewood have been given new titles and responsibilities for Service Wire Co.

Bruce Kesler has assumed the role of Senior Director – Business Development. Bruce will be responsible for Service Wire’s largest strategic accounts and our growing Strategic Accounts Team.

Mark Gatewood has been promoted to the role of Vice President – Sales & Marketing. In this role, Gatewood will lead the efforts of Service Wire Company’s entire sales and marketing organization in all market verticals.

Read More

Tri-Mach Announces the Purchase of an Additional 45,000 sq ft. Facility

Tri-Mach Elmira Facility

Recently, Tri-Mach Inc. was thrilled to announce the addition of a new 45,000 sq ft. facility. Located at 285 Union St., Elmira, ON, this facility expands Tri-Mach’s capabilities, allowing them to better serve the growing needs of their customers.

Positioning for growth, this additional facility will allow Tri-Mach to continue taking on large-scale projects, enhance product performance testing, and provide equipment storage for their customers. The building will also be the new home to their Skilled Trades Centre of Excellence.

Read More

JMP Parent Company, CONVERGIX Acquires AGR Automation, Expanding Global Reach

Convergix Automation Solutions has completed the acquisition of AGR Automation (“AGR”), a UK-based provider of custom, high-performance automation design and systems integration primarily to the life sciences industry.

Following Convergix’s acquisitions of JMP Solutions in August 2021 and Classic Design in February 2022, AGR marks the third investment in Crestview’s strategy to build Convergix into a diversified automation solutions provider targeting the global $500+ billion market, with a particular focus on the $70 billion global systems integration and connectivity segments. Financial terms of the transaction were not disclosed.

Read More

Latest Articles

  • Siemens to Establish Global AI Manufacturing Technologies R&D Center for Battery Production in Canada

    Siemens to Establish Global AI Manufacturing Technologies R&D Center for Battery Production in Canada

    Siemens will invest CAD$150 million (ca. €97 million) over five years to establish a Global AI Manufacturing Technologies Research and Development (R&D) Center for Battery Production in Canada. The new R&D center, located initially at Siemens Canada’s head office in Oakville, as well as in Toronto and Kitchener-Waterloo, Ontario, will focus on developing cutting-edge AI… Read More…

  • Proax: The Complete Guide to DIN Rail Types & Applications

    Proax: The Complete Guide to DIN Rail Types & Applications

    DIN rail is a standardized mounting solution that has become the backbone of modern electrical control panels and equipment racks. Originally developed by the German Institute for Standardization (Deutsches Institut für Normung, or DIN), these metal rails have evolved into an essential component across various industries. As an authorized distributor of Phoenix Contact DIN rails, Proax… Read More…