CCTV Tester – SecuriTEST™ IP

Ideal Networks

 

October 4, 2018

SecuriTEST IP is an installation and troubleshooting tester for digital/IP, HD coax and analogue CCTV camera systems. With a single tester that can power, configure and document, SecuriTEST IP increases productivity from start to finish.

 – Connect to various cameras using RJ45, Wi-Fi or BNC ports

– Power the camera with 12V from the Li-Ion battery or PoE/PoE

– Faster camera login using the unique QuickIP™ function

– Comprehensive camera setup with aim, focus, PTZ, presets and network settings 

– Provide proof of installation with PDF reports that show camera parameters and multiple video screen-shots

– Eliminate guess work with data cable and network troubleshooting tools

For more information HERE

 

 

Related Articles

Harting

New HARTING Slim, EasyCon Connectors Serve Rail Industry’s Need for More Flexibility

 

HARTING, a leading supplier of connectivity solutions for the rail industry, has expanded its rugged Han HPR connector series for harsh environments with more options to help manufacturers of rolling stock assemble the increasingly complex electrical systems of modern equipment. The new Han HPR 22 Slim connector can accommodate up to four 250A contacts, yet its flat profile is ideal for height-restricted spaces like the underside of a rail car and its ultra-slim profile leaves room in wiring pathways for other critical systems.

 

Legend Power Systems Introduces SmartGATE Insights

Legend Power Systems Introduces SmartGATE Insights

Following its recent announcement of significant enhancements to its SmartGATE platform, Legend Power Systems Inc. has taken a key next step in finding and minimizing building-specific risk and waste created by the electric grid with the introduction of its SmartGATE Insights technology. It is available as a stand-alone diagnostic tool to prioritize areas of risk and waste across all buildings owned or operated by a customer. SmartGATE Insights is now built-in to new SmartGATE platforms, and available as a retrofit to a customer’s existing SmartGATE to serve as the verification engine for energy efficiency and effectiveness.

 

 

 

Ultra-Miniature and Surface-Mount Reed Switches Offer Wider Sensitivity Range for Position and Speed Sensing Applications

Ultra-Miniature and Surface-Mount Reed Switches Offer Wider Sensitivity Range for Position and Speed Sensing Applications

Littelfuse, Inc. recently introduced the MITI-7 Series Ultra-Miniature Reed Switch, a Form A (single-pole, single-throw normally open or SPST-NO) switch that’s hermetically sealed in a 7mm-long glass envelope. The MITI-7 Series offers sensitivity options ranging from 6 AT to 20 AT, far wider than existing magnetic switches of comparable size, which were limited to a range of just 6 AT to 10 AT.

 

 

 

Moxa: Go Small with Big Gains

Moxa: Go Small with Big Gains

Moxa has recently unveiled the EDS-2000-EL, with extra small switches to free up valuable space inside your machines and cabinets, allowing you to accomodate more devices for growing network demands. The EDS-2000-EL switches allow you to enhance data flow efficiency simply by flipping the DIP switches to enable QoS and BSP, which reduces the chances of data loss and increased operating costs for your applications.

 

 

 

Changing Scene

  • Wesco Opens State-of-the-Art Facility in Eastern Canada to Support Influx of Megaprojects in the Region

    Wesco Opens State-of-the-Art Facility in Eastern Canada to Support Influx of Megaprojects in the Region

    Wesco International has recently announced the grand opening of a new state-of-the-art facility on Higney Avenue in Dartmouth, Nova Scotia, Canada, making this the largest facility of any distributor in the Atlantic region. The new building, facilitated by Touchette Real Estate, a division of Groupe Touchette, will feature Wesco’s comprehensive suite of services and solutions including… Read More…

  • PataBid Nominated for Canadian Choice Award in Software Services

    PataBid Nominated for Canadian Choice Award in Software Services

    PataBid is proud to announce its nomination for a Canadian Choice Award in the Software Services category. This recognition highlights PataBid’s commitment to supporting the electrical contracting community across Canada by providing innovative estimating software solutions that streamline estimating processes and ensure predictable and profitable projects. Read More…

Sponsored Content
The Easy Way to the Industrial IoT

The way to the Industrial IoT does not have to be complicated. Whether access to valuable data is required or new, data-driven services are to be generated, Weidmuller enables its customers to go from data to value the easy way. Weidmuller’s comprehensive and cutting-edge IIoT portfolio applies to greenfield and brownfield applications. Weidmuller offers components and solutions from data acquisition, data pre-processing, data communication and data analysis.

Visit Weidmuller’s Industrial IoT Portfolio.

ADVANCED Motion Controls Takes Servo Drives to New Heights (and Depths) with FlexPro Extended Environment Product Line

Advanced Motion Controls is proud to announce the addition of six new CANopen servo drives with Extended Environment capabilities to their FlexPro line. These new drives join AMC’s existing EtherCAT Extended Environment FlexPro drives, making the FlexPro line the go-to solution for motion control applications in harsh environments.

Many motion control applications take place in conditions that are less than ideal, such as extreme temperatures, high and low pressures, shocks and vibrations, and contamination. Electronics, including servo drives, can malfunction or sustain permanent damage in these conditions.

Read More

Service Wire Co. Announces New Titles for Key Executives

Bruce Kesler and Mark Gatewood have been given new titles and responsibilities for Service Wire Co.

Bruce Kesler has assumed the role of Senior Director – Business Development. Bruce will be responsible for Service Wire’s largest strategic accounts and our growing Strategic Accounts Team.

Mark Gatewood has been promoted to the role of Vice President – Sales & Marketing. In this role, Gatewood will lead the efforts of Service Wire Company’s entire sales and marketing organization in all market verticals.

Read More

Tri-Mach Announces the Purchase of an Additional 45,000 sq ft. Facility

Tri-Mach Elmira Facility

Recently, Tri-Mach Inc. was thrilled to announce the addition of a new 45,000 sq ft. facility. Located at 285 Union St., Elmira, ON, this facility expands Tri-Mach’s capabilities, allowing them to better serve the growing needs of their customers.

Positioning for growth, this additional facility will allow Tri-Mach to continue taking on large-scale projects, enhance product performance testing, and provide equipment storage for their customers. The building will also be the new home to their Skilled Trades Centre of Excellence.

Read More

JMP Parent Company, CONVERGIX Acquires AGR Automation, Expanding Global Reach

Convergix Automation Solutions has completed the acquisition of AGR Automation (“AGR”), a UK-based provider of custom, high-performance automation design and systems integration primarily to the life sciences industry.

Following Convergix’s acquisitions of JMP Solutions in August 2021 and Classic Design in February 2022, AGR marks the third investment in Crestview’s strategy to build Convergix into a diversified automation solutions provider targeting the global $500+ billion market, with a particular focus on the $70 billion global systems integration and connectivity segments. Financial terms of the transaction were not disclosed.

Read More

Latest Articles

  • How Advanced X-Ray and AI Inspection Technologies Optimize Quality Control and Reduce Costs in SMT Manufacturing

    How Advanced X-Ray and AI Inspection Technologies Optimize Quality Control and Reduce Costs in SMT Manufacturing

    Explore how Omron’s latest X-Ray machines and AI-driven solutions are setting new standards in manufacturing efficiency and quality control. The manufacturing landscape is swiftly evolving, and Omron is at the forefront with its innovative PCB inspection machines. These systems offer profound insights into SMT production process, enhanced quality control, and can significantly reduce labor costs. Advancements… Read More…

  • KUKA Establishes New Software and Digital Business Segment

    KUKA Establishes New Software and Digital Business Segment

    Software is playing an increasingly important role in mechanical engineering. What used to be mostly solved mechanically is now done by electronics and the associated software. “With KUKA Digital, we are expanding our offering in order to position ourselves broadly for a market with strong growth potential. Our customers need products, solutions and consulting approaches to digitalize… Read More…