Omron Whitepaper – MVRC: Mark, Verify, Read and Communicate
Related Articles
What Does the MTBF (Mean Time Between Failures) Tell You About System Component Reliability? An Analysis From PULS
The term MTBF appears in the data sheets of various technical system components and often causes confusion. This is mainly due to the different calculation methods and the risk of confusion with the service lifetime of a device. At PULS, many R&D specialists deal with both parameters on a daily basis. With this knowledge, PULS brings a little light into the darkness in this blog article.
Where the Rubber Meets the Road – Transportation & Logistics in Manufacturing
What happens to your product when it leaves the warehouse? Can you see when it’s delivered to your customer? Do you know which batch was sent to which retailer? Can you tell what condition it was in when it arrived or who was responsible for it at any given time? With so much data and technology, the ability to trace your entire supply chain from component to customer is becoming a reality for small and medium manufacturers.
Planning a New Automation Project? Make Sure You Budget for Training and Development
Conversations about automation technology and design often focus on one thing – the technology itself. We think of the high-tech robots, the automated conveyors, or the precision welding machines that make it possible for factories to operate more efficiently, productively, and safely.
Germain Lamonde of EXFO has been named EY Entrepreneur Of The Year® 2018 Québec winner
Germain Lamonde, President and founder of EXFO, is this year’s EY Entrepreneur Of The Year 2018 Québec winner.
Q&A with HELU: Oil & Gas Instrumentation Cables
Reliable data transmission is a must, even under the most extreme mechanical and environmental conditions such as those found in the oil and gas industry. Cables must be versatile to perform whether it is on a ship at sea or in a refining plant on land. Instrumentation cables are the backbone to keeping the industry’s sophisticated machines online and operating at peak performance. Regional Sales Manager Andrew Gill answers some of the questions he hears in the field regarding these low-voltage cables.
Omron: MY-GS-R Relay Empowers Users with Enhanced Operational Visibility and Efficiency
Omron Automation Americas adds advancements to its’ panel solutions with the new MY-GS-R relay. This addition allows users to verify the operational state accurately, while encompassing the other key features such as vibration resistance, reduced wiring times, and unified component dimensions. This relay can be integrated in broad industries with a variety of different applications, including food processing, packaging machinery, palletizing/de-palletizing, assembling, and material handling.
What Does the MTBF (Mean Time Between Failures) Tell You About System Component Reliability? An Analysis From PULS
The term MTBF appears in the data sheets of various technical system components and often causes confusion. This is mainly due to the different calculation methods and the risk of confusion with the service lifetime of a device. At PULS, many R&D specialists deal with both parameters on a daily basis. With this knowledge, PULS brings a little light into the darkness in this blog article.
Where the Rubber Meets the Road – Transportation & Logistics in Manufacturing
What happens to your product when it leaves the warehouse? Can you see when it’s delivered to your customer? Do you know which batch was sent to which retailer? Can you tell what condition it was in when it arrived or who was responsible for it at any given time? With so much data and technology, the ability to trace your entire supply chain from component to customer is becoming a reality for small and medium manufacturers.
Planning a New Automation Project? Make Sure You Budget for Training and Development
Conversations about automation technology and design often focus on one thing – the technology itself. We think of the high-tech robots, the automated conveyors, or the precision welding machines that make it possible for factories to operate more efficiently, productively, and safely.
Germain Lamonde of EXFO has been named EY Entrepreneur Of The Year® 2018 Québec winner
Germain Lamonde, President and founder of EXFO, is this year’s EY Entrepreneur Of The Year 2018 Québec winner.
Q&A with HELU: Oil & Gas Instrumentation Cables
Reliable data transmission is a must, even under the most extreme mechanical and environmental conditions such as those found in the oil and gas industry. Cables must be versatile to perform whether it is on a ship at sea or in a refining plant on land. Instrumentation cables are the backbone to keeping the industry’s sophisticated machines online and operating at peak performance. Regional Sales Manager Andrew Gill answers some of the questions he hears in the field regarding these low-voltage cables.
Omron: MY-GS-R Relay Empowers Users with Enhanced Operational Visibility and Efficiency
Omron Automation Americas adds advancements to its’ panel solutions with the new MY-GS-R relay. This addition allows users to verify the operational state accurately, while encompassing the other key features such as vibration resistance, reduced wiring times, and unified component dimensions. This relay can be integrated in broad industries with a variety of different applications, including food processing, packaging machinery, palletizing/de-palletizing, assembling, and material handling.
What Does the MTBF (Mean Time Between Failures) Tell You About System Component Reliability? An Analysis From PULS
The term MTBF appears in the data sheets of various technical system components and often causes confusion. This is mainly due to the different calculation methods and the risk of confusion with the service lifetime of a device. At PULS, many R&D specialists deal with both parameters on a daily basis. With this knowledge, PULS brings a little light into the darkness in this blog article.
Where the Rubber Meets the Road – Transportation & Logistics in Manufacturing
What happens to your product when it leaves the warehouse? Can you see when it’s delivered to your customer? Do you know which batch was sent to which retailer? Can you tell what condition it was in when it arrived or who was responsible for it at any given time? With so much data and technology, the ability to trace your entire supply chain from component to customer is becoming a reality for small and medium manufacturers.
Planning a New Automation Project? Make Sure You Budget for Training and Development
Conversations about automation technology and design often focus on one thing – the technology itself. We think of the high-tech robots, the automated conveyors, or the precision welding machines that make it possible for factories to operate more efficiently, productively, and safely.
Germain Lamonde of EXFO has been named EY Entrepreneur Of The Year® 2018 Québec winner
Germain Lamonde, President and founder of EXFO, is this year’s EY Entrepreneur Of The Year 2018 Québec winner.
Q&A with HELU: Oil & Gas Instrumentation Cables
Reliable data transmission is a must, even under the most extreme mechanical and environmental conditions such as those found in the oil and gas industry. Cables must be versatile to perform whether it is on a ship at sea or in a refining plant on land. Instrumentation cables are the backbone to keeping the industry’s sophisticated machines online and operating at peak performance. Regional Sales Manager Andrew Gill answers some of the questions he hears in the field regarding these low-voltage cables.
Omron: MY-GS-R Relay Empowers Users with Enhanced Operational Visibility and Efficiency
Omron Automation Americas adds advancements to its’ panel solutions with the new MY-GS-R relay. This addition allows users to verify the operational state accurately, while encompassing the other key features such as vibration resistance, reduced wiring times, and unified component dimensions. This relay can be integrated in broad industries with a variety of different applications, including food processing, packaging machinery, palletizing/de-palletizing, assembling, and material handling.
Changing Scene
-
Hannafin Automation & Industrial Controls Inc. Has Joined the Festo Certified System Integrator Program
May 2, 2025 Festo Canada Announces Hannafin Automation & Industrial Controls Has Joined Certified System Integrator Program By: LinkedIn Post Festo Canada Festo Canada is thrilled to announce that Hannafin Automation & Industrial Controls Inc. has joined the Festo Certified System Integrator Program! As a 𝗰𝗲𝗿𝘁𝗶𝗳𝗶𝗲𝗱 𝗽𝗮𝗿𝘁𝗻𝗲𝗿, they bring effective automation expertise and will integrate… Read More…
-
Bedford Industrial Automation: Shining a Light on Their Team Member – Ed Penwell
At Bedford Industrial Automation, they strongly believe that building a better future starts with sharing knowledge, investing in people, and giving back to their communities. Today, they want to take a moment to recognize and celebrate someone who embodies those values every day, Ed Penwell, Bedford’s Halifax Branch Manager. In addition to leading their Halifax… Read More…
Sponsored Content
The Easy Way to the Industrial IoT
The way to the Industrial IoT does not have to be complicated. Whether access to valuable data is required or new, data-driven services are to be generated, Weidmuller enables its customers to go from data to value the easy way. Weidmuller’s comprehensive and cutting-edge IIoT portfolio applies to greenfield and brownfield applications. Weidmuller offers components and solutions from data acquisition, data pre-processing, data communication and data analysis.
Visit Weidmuller’s Industrial IoT Portfolio.
ADVANCED Motion Controls Takes Servo Drives to New Heights (and Depths) with FlexPro Extended Environment Product Line
Advanced Motion Controls is proud to announce the addition of six new CANopen servo drives with Extended Environment capabilities to their FlexPro line. These new drives join AMC’s existing EtherCAT Extended Environment FlexPro drives, making the FlexPro line the go-to solution for motion control applications in harsh environments.
Many motion control applications take place in conditions that are less than ideal, such as extreme temperatures, high and low pressures, shocks and vibrations, and contamination. Electronics, including servo drives, can malfunction or sustain permanent damage in these conditions.
Service Wire Co. Announces New Titles for Key Executives
Bruce Kesler and Mark Gatewood have been given new titles and responsibilities for Service Wire Co.
Bruce Kesler has assumed the role of Senior Director – Business Development. Bruce will be responsible for Service Wire’s largest strategic accounts and our growing Strategic Accounts Team.
Mark Gatewood has been promoted to the role of Vice President – Sales & Marketing. In this role, Gatewood will lead the efforts of Service Wire Company’s entire sales and marketing organization in all market verticals.
Tri-Mach Announces the Purchase of an Additional 45,000 sq ft. Facility
Recently, Tri-Mach Inc. was thrilled to announce the addition of a new 45,000 sq ft. facility. Located at 285 Union St., Elmira, ON, this facility expands Tri-Mach’s capabilities, allowing them to better serve the growing needs of their customers.
Positioning for growth, this additional facility will allow Tri-Mach to continue taking on large-scale projects, enhance product performance testing, and provide equipment storage for their customers. The building will also be the new home to their Skilled Trades Centre of Excellence.
JMP Parent Company, CONVERGIX Acquires AGR Automation, Expanding Global Reach
Convergix Automation Solutions has completed the acquisition of AGR Automation (“AGR”), a UK-based provider of custom, high-performance automation design and systems integration primarily to the life sciences industry.
Following Convergix’s acquisitions of JMP Solutions in August 2021 and Classic Design in February 2022, AGR marks the third investment in Crestview’s strategy to build Convergix into a diversified automation solutions provider targeting the global $500+ billion market, with a particular focus on the $70 billion global systems integration and connectivity segments. Financial terms of the transaction were not disclosed.
Latest Articles
-
NOARK: Battle of the Breakers – MCCBs vs ACBs
May 7, 2025 MCCBs & ACBs: Exploring the Benefits & Differences By: Sandra Abuwalla Circuit breakers serve crucial functions. They rapidly stop faulty electric currents to prevent costly damage to equipment. Their designs differ depending on intended use and load capacities. Two common categories are Molded Case Circuit Breakers and Air Circuit Breakers. Though each disconnects power during… Read More…
-
Digital Twin Technology: Revolutionizing Manufacturing with Real-Time Insights
Imagine a manufacturing floor where every machine’s performance is predicted, every process is optimized, and every design flaw is identified before production begins. This isn’t science fiction; it’s the reality enabled by Digital Twin Technology. In today’s rapidly evolving industrial landscape, staying competitive requires embracing smart manufacturing and Industry 4.0 principles. This article will examine how digital twins are… Read More…
