International and versatile: Pilz takes a look back on the year 2018

January 2, 2019

The generational change in particular shows that Pilz is a versatile company. Susanne Kunschert and Thomas Pilz took over the management at the beginning of the year, after the parting of Renate Pilz. Pilz looks back on a fascinating year.

Room for new developments in Cork

It is now 20 years that the former Managing Director Renate Pilz recognised the potential in Ireland and founded a software development centre in Cork. In March, Pilz opened the new software development centre in Cork. Up to 125 developers now have a 2,500 square metre software development centre in which to fine-tune their new software ideas for developing, programming and visualising control systems. The infrastructure investment enables Pilz to expand its software portfolio and new technologies.

International competence

With the expansion of the development centre, Pilz Ireland also celebrated its 20. anniversary. In 2018, three further anniversaries were celebrated: 25 years ago, the Italian subsidiary was founded, and 20 years ago there were further offices in Brazil and Australia. Pilz continued the worldwide networking also in 2018: At the exhibition premiere of SPS Automation Middle East, Pilz established contacts in Dubai with potential new customers.

Innovative solutions for robotics and rail

Pilz had its 70. anniversary this year, which was celebrated with a staff party. And Pilz still holds surprises: At the Automatica, the new Pilz service robotics modules attracted a lot of attention with the exhibition visitors. Pilz acted in start-up manner in Munich, and presented the varied application options of the modules – from the pick-and-place application with two robot arms to the Automated Guided Vehicle System (AGVS). And even apart form classic mechanical engineering, Pilz attracts attention: At the Innotrans, the international trade fair for the rail transport industry in Berlin, Pilz as a newcomer to the industry presented an outlook to the future of Railway 4.0 and complete solutions for system integrators, such as a switchpoint controller with the automation system PSS 4000-R.

A highlight of the end of the year

The year was crowned with the accolade for Renate Pilz: She is the first woman to receive the Preis des Deutschen Maschinenbaus (Award of German Mechanical Engineering) for her life’s work. Claus Wilk, chief editor of Produktion, pointed out in his laudation the corporate culture of treating one another with respect, and the innovative power of Pilz. After all, the name of Pilz has always represented technology that is ahead of its time. And these values will accompany Pilz in also in 2019.

Related Articles


Changing Scene

  • Wesco Opens State-of-the-Art Facility in Eastern Canada to Support Influx of Megaprojects in the Region

    Wesco Opens State-of-the-Art Facility in Eastern Canada to Support Influx of Megaprojects in the Region

    Wesco International has recently announced the grand opening of a new state-of-the-art facility on Higney Avenue in Dartmouth, Nova Scotia, Canada, making this the largest facility of any distributor in the Atlantic region. The new building, facilitated by Touchette Real Estate, a division of Groupe Touchette, will feature Wesco’s comprehensive suite of services and solutions including… Read More…

  • PataBid Nominated for Canadian Choice Award in Software Services

    PataBid Nominated for Canadian Choice Award in Software Services

    PataBid is proud to announce its nomination for a Canadian Choice Award in the Software Services category. This recognition highlights PataBid’s commitment to supporting the electrical contracting community across Canada by providing innovative estimating software solutions that streamline estimating processes and ensure predictable and profitable projects. Read More…


Sponsored Content
The Easy Way to the Industrial IoT

The way to the Industrial IoT does not have to be complicated. Whether access to valuable data is required or new, data-driven services are to be generated, Weidmuller enables its customers to go from data to value the easy way. Weidmuller’s comprehensive and cutting-edge IIoT portfolio applies to greenfield and brownfield applications. Weidmuller offers components and solutions from data acquisition, data pre-processing, data communication and data analysis.

Visit Weidmuller’s Industrial IoT Portfolio.


ADVANCED Motion Controls Takes Servo Drives to New Heights (and Depths) with FlexPro Extended Environment Product Line

Advanced Motion Controls is proud to announce the addition of six new CANopen servo drives with Extended Environment capabilities to their FlexPro line. These new drives join AMC’s existing EtherCAT Extended Environment FlexPro drives, making the FlexPro line the go-to solution for motion control applications in harsh environments.

Many motion control applications take place in conditions that are less than ideal, such as extreme temperatures, high and low pressures, shocks and vibrations, and contamination. Electronics, including servo drives, can malfunction or sustain permanent damage in these conditions.

Read More


Service Wire Co. Announces New Titles for Key Executives

Bruce Kesler and Mark Gatewood have been given new titles and responsibilities for Service Wire Co.

Bruce Kesler has assumed the role of Senior Director – Business Development. Bruce will be responsible for Service Wire’s largest strategic accounts and our growing Strategic Accounts Team.

Mark Gatewood has been promoted to the role of Vice President – Sales & Marketing. In this role, Gatewood will lead the efforts of Service Wire Company’s entire sales and marketing organization in all market verticals.

Read More


Tri-Mach Announces the Purchase of an Additional 45,000 sq ft. Facility

Tri-Mach Elmira Facility

Recently, Tri-Mach Inc. was thrilled to announce the addition of a new 45,000 sq ft. facility. Located at 285 Union St., Elmira, ON, this facility expands Tri-Mach’s capabilities, allowing them to better serve the growing needs of their customers.

Positioning for growth, this additional facility will allow Tri-Mach to continue taking on large-scale projects, enhance product performance testing, and provide equipment storage for their customers. The building will also be the new home to their Skilled Trades Centre of Excellence.

Read More


JMP Parent Company, CONVERGIX Acquires AGR Automation, Expanding Global Reach

Convergix Automation Solutions has completed the acquisition of AGR Automation (“AGR”), a UK-based provider of custom, high-performance automation design and systems integration primarily to the life sciences industry.

Following Convergix’s acquisitions of JMP Solutions in August 2021 and Classic Design in February 2022, AGR marks the third investment in Crestview’s strategy to build Convergix into a diversified automation solutions provider targeting the global $500+ billion market, with a particular focus on the $70 billion global systems integration and connectivity segments. Financial terms of the transaction were not disclosed.

Read More


Latest Articles

  • How Advanced X-Ray and AI Inspection Technologies Optimize Quality Control and Reduce Costs in SMT Manufacturing

    How Advanced X-Ray and AI Inspection Technologies Optimize Quality Control and Reduce Costs in SMT Manufacturing

    Explore how Omron’s latest X-Ray machines and AI-driven solutions are setting new standards in manufacturing efficiency and quality control. The manufacturing landscape is swiftly evolving, and Omron is at the forefront with its innovative PCB inspection machines. These systems offer profound insights into SMT production process, enhanced quality control, and can significantly reduce labor costs. Advancements… Read More…

  • KUKA Establishes New Software and Digital Business Segment

    KUKA Establishes New Software and Digital Business Segment

    Software is playing an increasingly important role in mechanical engineering. What used to be mostly solved mechanically is now done by electronics and the associated software. “With KUKA Digital, we are expanding our offering in order to position ourselves broadly for a market with strong growth potential. Our customers need products, solutions and consulting approaches to digitalize… Read More…