Schneider Electric Introduces High-efficiency 30kW InRow Data Center Cooling Solution to Support Increasing Power Densities

30kw InRow Data Centre 400

May 7, 2019

Schneider Electric recently announced the expansion of its EcoStruxure Ready cooling portfolio, with the introduction of a 30kW InRow DX solution. Available in a 300mm rack format, this data center cooling solution offers industry leading efficiency and addresses the increasing demand for higher density cooling in the data center.    

The trend toward modernization and consolidation of data centers is driving the need for a cooling solution that provides more cooling capacity in a smaller footprint and flexible capacity to adapt to the actual data center load. The 30kW InRow DX is ideal for data centers that are being modernized or retrofitted, or anywhere IT space is at a premium. Due to its powerfully compact size and energy efficient design, the InRow DX is the most versatile and predictable cooling system for next generation small and medium data centers and an optimal choice for edge and enterprise environments.

The 30kW InRow DX offers numerous benefits including:

  • Cooling density: provides up to 3x more capacity compared to previous models, meaning fewer units are needed, freeing up more floor space for IT equipment.
  • High efficiency: uses energy efficient compressor and fans to reduce OpEx and make more power available for other IT equipment.
  • Flexible design: easily addresses common installation constraints and reduces service requirements inside the white space.
  • Variable capacity: Variable Speed Drive compressor allows you to adapt cooling load to the actual thermal demand.
  • Cost Savings: leveraging the low amps of the unit to deliver electrical CapEx reduction.
  • EcoStruxure™ Ready: easy to manage with global visibility of equipment performance and status supported with a 24/7 expert service bureau.

“If you are consolidating, modernizing, or expanding your data center and struggling to manage the heat profile introduced by the new servers, the versatile new 30kW InRow DX is ideal,” said Ben Smith, Vice President of Cooling, Schneider Electric. “Powerfully compact and with unmatched efficiency, the 30kW InRow allows for fewer units to provide the same amount of cooling capacity.”

Click HERE to find out more about the 30kW InRow DX and Schneider Electric’s complete line of cooling solutions.

Related Articles

Changing Scene

  • Hubbell Canada Announces Frank Magisano as New Vice President & General Manager

    Hubbell Canada Announces Frank Magisano as New Vice President & General Manager

    Hubbell is thrilled to announce the promotion of Frank Magisano to the position of Vice President & General Manager of Hubbell Canada. Frank joined the Hubbell team in 2001 and has since demonstrated exceptional leadership and expertise across various departments, including engineering, operations, and business development. His comprehensive understanding of the industry and dedication to… Read More…

  • Gescan Announces Strategic Distribution Partnership with ABB Canada

    Gescan Announces Strategic Distribution Partnership with ABB Canada

    Gescan is pleased to announce a new distribution partnership with ABB Motion, renowned for its pioneering solutions in automation and electrification. Gescan will now offer ABB’s high-quality drive solutions in Manitoba and Saskatchewan, making energy-efficient motor control technology more accessible to businesses in the region. “ABB Motion has a long-standing reputation for technological excellence, and… Read More…

Sponsored Content
The Easy Way to the Industrial IoT

The way to the Industrial IoT does not have to be complicated. Whether access to valuable data is required or new, data-driven services are to be generated, Weidmuller enables its customers to go from data to value the easy way. Weidmuller’s comprehensive and cutting-edge IIoT portfolio applies to greenfield and brownfield applications. Weidmuller offers components and solutions from data acquisition, data pre-processing, data communication and data analysis.

Visit Weidmuller’s Industrial IoT Portfolio.

ADVANCED Motion Controls Takes Servo Drives to New Heights (and Depths) with FlexPro Extended Environment Product Line

Advanced Motion Controls is proud to announce the addition of six new CANopen servo drives with Extended Environment capabilities to their FlexPro line. These new drives join AMC’s existing EtherCAT Extended Environment FlexPro drives, making the FlexPro line the go-to solution for motion control applications in harsh environments.

Many motion control applications take place in conditions that are less than ideal, such as extreme temperatures, high and low pressures, shocks and vibrations, and contamination. Electronics, including servo drives, can malfunction or sustain permanent damage in these conditions.

Read More

Service Wire Co. Announces New Titles for Key Executives

Bruce Kesler and Mark Gatewood have been given new titles and responsibilities for Service Wire Co.

Bruce Kesler has assumed the role of Senior Director – Business Development. Bruce will be responsible for Service Wire’s largest strategic accounts and our growing Strategic Accounts Team.

Mark Gatewood has been promoted to the role of Vice President – Sales & Marketing. In this role, Gatewood will lead the efforts of Service Wire Company’s entire sales and marketing organization in all market verticals.

Read More

Tri-Mach Announces the Purchase of an Additional 45,000 sq ft. Facility

Tri-Mach Elmira Facility

Recently, Tri-Mach Inc. was thrilled to announce the addition of a new 45,000 sq ft. facility. Located at 285 Union St., Elmira, ON, this facility expands Tri-Mach’s capabilities, allowing them to better serve the growing needs of their customers.

Positioning for growth, this additional facility will allow Tri-Mach to continue taking on large-scale projects, enhance product performance testing, and provide equipment storage for their customers. The building will also be the new home to their Skilled Trades Centre of Excellence.

Read More

JMP Parent Company, CONVERGIX Acquires AGR Automation, Expanding Global Reach

Convergix Automation Solutions has completed the acquisition of AGR Automation (“AGR”), a UK-based provider of custom, high-performance automation design and systems integration primarily to the life sciences industry.

Following Convergix’s acquisitions of JMP Solutions in August 2021 and Classic Design in February 2022, AGR marks the third investment in Crestview’s strategy to build Convergix into a diversified automation solutions provider targeting the global $500+ billion market, with a particular focus on the $70 billion global systems integration and connectivity segments. Financial terms of the transaction were not disclosed.

Read More

Latest Articles

  • Design Systems Canada Provides Insights on the Future of Supply Chains in Canada

    Design Systems Canada Provides Insights on the Future of Supply Chains in Canada

    The current state of Canadian manufacturing and its intricate supply chain is one of significant change. Over the past few years, global events have exposed vulnerabilities, forcing us to rethink how we move goods and materials. The reality is stark: relying solely on distant, complex supply lines leaves businesses exposed. Recent disruptions have taught us… Read More…

  • Beckhoff: Automation Technology for Sorting Systems

    Beckhoff: Automation Technology for Sorting Systems

    More and more parcels, rapidly changing formats, less and less time: Intralogistics – the demands on logistics sorting systems and equipment in retail and in parcel centers are increasing rapidly. This development is being fueled by high growth rates in e-commerce worldwide. Market players require fast, high-throughput, and freely scalable sorting and distribution systems to… Read More…