ABB launches 800V AC Fusegear for Higher-Voltage Solar Power Plants

PBSI ABB ac fuse 400

June 11, 2019

ABB has introduced a selection of Fusegear with 800V AC ratings to support the higher voltage architectures in solar power plants. The InLine II, EasyLine XLP and SlimLine XR Fusegear ranges now offer solutions for applications such as solar AC combiners where 800V is used to reduce power losses.

Giampiero Frisio, head of ABB’s Smart Power business line, said: “ABB innovations enable industries to evolve. The addition of these 800V AC Fusegear to our portfolio maintains ABB’s technological leadership and supports the growth of an important trend in renewables. ABB’s 800V AC Fusegear solutions will help new solar power plants introducing string inverter architectures to lower overall system costs.”

The use of string inverters for large photovoltaic systems with 20MW or less of installed power is set to increase. Operating at higher voltages reduces the transmission losses and cabling costs of these plants, while limiting the impact of any faults, reducing downtime and maximizing productivity. Higher voltage ratings will also mean fewer DC combiner boxes and less wiring complexity.

Inverters with higher power ratings are smaller, lighter and easier to handle, making installations and replacements manageable for just one or two staff. Higher voltage also helps photovoltaic plants reduce the number of components needed and makes logistics easier. Installation times are shorter and wiring costs are lower, with significant overall savings of up to 20 percent.

ABB’s 800V AC rated Fusegear have AC-22B utilization categories with a rated operational current of up to 400A. The fuses are designed to provide short circuit protection up to 50 kA.

The InLine II range of vertical fuse switch disconnectors is typically used in cable distribution cabinets and on the low voltage side of small secondary substations, in solar applications they find their place preferably in AC combiner boxes. The new devices now available are:

  • InLine II ZLBM3 and ZHBM3, rated for 400A, short circuit protection up to 50kA,
  • Inline II ZLBM1 and ZHBM1, rated for 160A, short circuit protection up to 50kA
  • InLine II ZLBM00-100, rated for 63A, short circuit protection up to 30kA

Meanwhile, the new EasyLine XLP00-3P and XLP1-3P Fusegear are suitable for capacitor banks, power distribution panels and in AC combiner boxes. They are rated for 63A and 160A respectively and provide short circuit protection up to 30kA.

Finally, the SlimLine XR range is used in energy distribution, powerplant switchboards and data centers, often as part of ABB’s System Pro E power enclosures. The new XRM1-3P has a rated operational voltage of 800 VAC and a rated operational current of 160A, while providing protection up to 50kA short circuit currents.

Go HERE for more information

Related Articles


Changing Scene

  • Wesco Opens State-of-the-Art Facility in Eastern Canada to Support Influx of Megaprojects in the Region

    Wesco Opens State-of-the-Art Facility in Eastern Canada to Support Influx of Megaprojects in the Region

    Wesco International has recently announced the grand opening of a new state-of-the-art facility on Higney Avenue in Dartmouth, Nova Scotia, Canada, making this the largest facility of any distributor in the Atlantic region. The new building, facilitated by Touchette Real Estate, a division of Groupe Touchette, will feature Wesco’s comprehensive suite of services and solutions including… Read More…

  • PataBid Nominated for Canadian Choice Award in Software Services

    PataBid Nominated for Canadian Choice Award in Software Services

    PataBid is proud to announce its nomination for a Canadian Choice Award in the Software Services category. This recognition highlights PataBid’s commitment to supporting the electrical contracting community across Canada by providing innovative estimating software solutions that streamline estimating processes and ensure predictable and profitable projects. Read More…


Sponsored Content
The Easy Way to the Industrial IoT

The way to the Industrial IoT does not have to be complicated. Whether access to valuable data is required or new, data-driven services are to be generated, Weidmuller enables its customers to go from data to value the easy way. Weidmuller’s comprehensive and cutting-edge IIoT portfolio applies to greenfield and brownfield applications. Weidmuller offers components and solutions from data acquisition, data pre-processing, data communication and data analysis.

Visit Weidmuller’s Industrial IoT Portfolio.


ADVANCED Motion Controls Takes Servo Drives to New Heights (and Depths) with FlexPro Extended Environment Product Line

Advanced Motion Controls is proud to announce the addition of six new CANopen servo drives with Extended Environment capabilities to their FlexPro line. These new drives join AMC’s existing EtherCAT Extended Environment FlexPro drives, making the FlexPro line the go-to solution for motion control applications in harsh environments.

Many motion control applications take place in conditions that are less than ideal, such as extreme temperatures, high and low pressures, shocks and vibrations, and contamination. Electronics, including servo drives, can malfunction or sustain permanent damage in these conditions.

Read More


Service Wire Co. Announces New Titles for Key Executives

Bruce Kesler and Mark Gatewood have been given new titles and responsibilities for Service Wire Co.

Bruce Kesler has assumed the role of Senior Director – Business Development. Bruce will be responsible for Service Wire’s largest strategic accounts and our growing Strategic Accounts Team.

Mark Gatewood has been promoted to the role of Vice President – Sales & Marketing. In this role, Gatewood will lead the efforts of Service Wire Company’s entire sales and marketing organization in all market verticals.

Read More


Tri-Mach Announces the Purchase of an Additional 45,000 sq ft. Facility

Tri-Mach Elmira Facility

Recently, Tri-Mach Inc. was thrilled to announce the addition of a new 45,000 sq ft. facility. Located at 285 Union St., Elmira, ON, this facility expands Tri-Mach’s capabilities, allowing them to better serve the growing needs of their customers.

Positioning for growth, this additional facility will allow Tri-Mach to continue taking on large-scale projects, enhance product performance testing, and provide equipment storage for their customers. The building will also be the new home to their Skilled Trades Centre of Excellence.

Read More


JMP Parent Company, CONVERGIX Acquires AGR Automation, Expanding Global Reach

Convergix Automation Solutions has completed the acquisition of AGR Automation (“AGR”), a UK-based provider of custom, high-performance automation design and systems integration primarily to the life sciences industry.

Following Convergix’s acquisitions of JMP Solutions in August 2021 and Classic Design in February 2022, AGR marks the third investment in Crestview’s strategy to build Convergix into a diversified automation solutions provider targeting the global $500+ billion market, with a particular focus on the $70 billion global systems integration and connectivity segments. Financial terms of the transaction were not disclosed.

Read More


Latest Articles

  • How Advanced X-Ray and AI Inspection Technologies Optimize Quality Control and Reduce Costs in SMT Manufacturing

    How Advanced X-Ray and AI Inspection Technologies Optimize Quality Control and Reduce Costs in SMT Manufacturing

    Explore how Omron’s latest X-Ray machines and AI-driven solutions are setting new standards in manufacturing efficiency and quality control. The manufacturing landscape is swiftly evolving, and Omron is at the forefront with its innovative PCB inspection machines. These systems offer profound insights into SMT production process, enhanced quality control, and can significantly reduce labor costs. Advancements… Read More…

  • KUKA Establishes New Software and Digital Business Segment

    KUKA Establishes New Software and Digital Business Segment

    Software is playing an increasingly important role in mechanical engineering. What used to be mostly solved mechanically is now done by electronics and the associated software. “With KUKA Digital, we are expanding our offering in order to position ourselves broadly for a market with strong growth potential. Our customers need products, solutions and consulting approaches to digitalize… Read More…