Balluff Simplifies Analog Device Integration with IO-Link

July 3, 2019

Balluff’s newest family of single channel, analog interface modules simplify configuration and integration of analog devices by interfacing with IO-Link. Because analog devices are widely used in factory automation controls architectures, these modules can save valuable time and resources.

Balluff is introducing four second-generation, single channel analog-to-IO-Link interface modules used to convert a variety of analog input data such as current, voltage, and RTD/thermocouple measurement to digital equivalent values. And having IO-Link onboard enhances diagnostic information available. The new modules are:

  • BNI00C9 – Analog input conversion of input data like current, voltage and RTDs
  • BNI00C7 – Analog input for temperature measurement sensors, Type J, Type K, or RTDs
  • BNI00C8 – Analog output module with voltage or current output configurations
  • BNI00C6 – Universal analog module, configure as either an analog input or analog output.

These modules further simplify installations by eliminating analog in-chassis interface boards and reducing additional analog network blocks. IO-Link lets you replace lengthy shielded cable runs with basic unshielded cables.

Key features include:

  • Single channel analog interface modules designed to simplify analog integration
  • Extended diagnostics available through IO-Link communication, such as measurement out of range
  • 18mm smooth barrel style inline design with IP67 protection rating in stainless steel housing
  • Condition monitoring data, such as ambient temperature and operating hours
  • User selectable resolution from 10 to 16 bits for digital values

Learn more at: www.balluff.com

Related Articles

Polycase: New Sizes for EK Series

Polycase: New Sizes for EK Series

Polycase has recently expanded the EK Series of DIN rail mount boxes to include 2 new sizes: the EK-52 and EK-54. The Polycase EK series offers a versatile clip that snaps onto a standard DIN-35 rail, allowing you to easily mount internal components. Both new sizes are larger compared to the current EK-50 and provide an alternative PCB mounting option that allows the user to capture their PCB on the screw tower rib (versus the molded-in mounting bosses) – helping save assembly time by not having to screw down the PCB.

Pilz: IndustrialPI – The Flexible and Versatile Industrial PC That Adapts to All Your Needs

Pilz: IndustrialPI – The Flexible and Versatile Industrial PC That Adapts to All Your Needs

With the IndustrialPI industrial PC, Pilz supports you in the implementation of the most varied applications in industrial automation. Thanks to its modular design, the open, Linux-based operating system and integrated interfaces, IndustrialPI is a true all-rounder. IndustrialPI is versatile, whether purely as an industrial PC, industrial controller (soft PLC) or as an IIoT gateway for your data. It is thus ideally equipped to implement your IIoT, automation and motion projects in industrial automation environments.

WAGO’s Remote I/O: The Winning Hand in Industrial Automation

WAGO’s Remote I/O: The Winning Hand in Industrial Automation

WAGO’s 750/753 Series Remote I/O system provides the confidence to go all-in on your automation application.  Boasting 16 fieldbus options and interoperability with higher level PLCs, these modules offer the most flexible, modular, and compact platform for stand-alone or distributed automation.  Choose from over 500 simple and complex modules that allow for easy data acquisition from almost any signal. Cost-effective system upgrades can be made for energy monitoring, IO-Link masters, and proportional valve control, just to name a few examples.

Sealed 2+2 Jaw Chuck With Large Compensation Stroke Allows Maximum Flexibility on Mill/Turn Machines

Sealed 2+2 Jaw Chuck With Large Compensation Stroke Allows Maximum Flexibility on Mill/Turn Machines

To meet the increasing demands of the market, SCHUNK has developed the low-maintenance 2+2 jaw chuck SCHUNK ROTA-M flex 2+2, which has a particularly large compensation stroke by virtue of a compensation mechanism (patent pending): Depending on the size, this is between 5.1 mm and 10 mm per jaw – more than with any other 4-jaw chuck on the market.

 

 

 

Changing Scene

Sponsored Content
The Easy Way to the Industrial IoT

The way to the Industrial IoT does not have to be complicated. Whether access to valuable data is required or new, data-driven services are to be generated, Weidmuller enables its customers to go from data to value the easy way. Weidmuller’s comprehensive and cutting-edge IIoT portfolio applies to greenfield and brownfield applications. Weidmuller offers components and solutions from data acquisition, data pre-processing, data communication and data analysis.

Visit Weidmuller’s Industrial IoT Portfolio.

ADVANCED Motion Controls Takes Servo Drives to New Heights (and Depths) with FlexPro Extended Environment Product Line

Advanced Motion Controls is proud to announce the addition of six new CANopen servo drives with Extended Environment capabilities to their FlexPro line. These new drives join AMC’s existing EtherCAT Extended Environment FlexPro drives, making the FlexPro line the go-to solution for motion control applications in harsh environments.

Many motion control applications take place in conditions that are less than ideal, such as extreme temperatures, high and low pressures, shocks and vibrations, and contamination. Electronics, including servo drives, can malfunction or sustain permanent damage in these conditions.

Read More

Service Wire Co. Announces New Titles for Key Executives

Bruce Kesler and Mark Gatewood have been given new titles and responsibilities for Service Wire Co.

Bruce Kesler has assumed the role of Senior Director – Business Development. Bruce will be responsible for Service Wire’s largest strategic accounts and our growing Strategic Accounts Team.

Mark Gatewood has been promoted to the role of Vice President – Sales & Marketing. In this role, Gatewood will lead the efforts of Service Wire Company’s entire sales and marketing organization in all market verticals.

Read More

Tri-Mach Announces the Purchase of an Additional 45,000 sq ft. Facility

Tri-Mach Elmira Facility

Recently, Tri-Mach Inc. was thrilled to announce the addition of a new 45,000 sq ft. facility. Located at 285 Union St., Elmira, ON, this facility expands Tri-Mach’s capabilities, allowing them to better serve the growing needs of their customers.

Positioning for growth, this additional facility will allow Tri-Mach to continue taking on large-scale projects, enhance product performance testing, and provide equipment storage for their customers. The building will also be the new home to their Skilled Trades Centre of Excellence.

Read More

JMP Parent Company, CONVERGIX Acquires AGR Automation, Expanding Global Reach

Convergix Automation Solutions has completed the acquisition of AGR Automation (“AGR”), a UK-based provider of custom, high-performance automation design and systems integration primarily to the life sciences industry.

Following Convergix’s acquisitions of JMP Solutions in August 2021 and Classic Design in February 2022, AGR marks the third investment in Crestview’s strategy to build Convergix into a diversified automation solutions provider targeting the global $500+ billion market, with a particular focus on the $70 billion global systems integration and connectivity segments. Financial terms of the transaction were not disclosed.

Read More

Latest Articles

  • Implementing Functional Safety Requirements

    Implementing Functional Safety Requirements

    The Safety Functional Requirements Specification (SFRS; sometimes referred to as SRS or Safety Requirements Specification) is the plan for the safety controls on a machine and is the second step of the safety lifecycle. The SFRS document serves as a framework for the safety control system design, is informed by prior work done in the… Read More…

  • From Endress+Hauser, 24/7 Digital, Plant-Wide Health Monitoring for Rockwell Systems Optimizes Workflows and Processes

    From Endress+Hauser, 24/7 Digital, Plant-Wide Health Monitoring for Rockwell Systems Optimizes Workflows and Processes

    Endress+Hauser’s Asset Health Monitoring Solution–Rockwell Edition, now available for installation, provides operators with a centralized, digital overview of plant-wide device health to avoid unscheduled shutdowns and accelerate troubleshooting. It not only presents early visibility of problematic devices but distinguishes itself by adding likely causes and remedies to such a report so problems can be fixed… Read More…