HARTING commissions European Distribution Center

July 3, 2019

A day of festivity marked the HARTING Technology Group’s official inauguration of its European Distribution Center (EDC) in Espelkamp. Up to 20,000 order items will be processed here on a daily basis, with goods to be dispatched to customers on the day of their order. Costing an estimated € 45 million, the EDC logistics centre is the largest single investment in the 74-year history of HARTING.

Roughly 10,000 packages can be shipped to customers and branches around the world on a daily basis. The 20-metre-high shelf warehouse can accommodate approx. 7,000 pallets and 120,000 containers. Installation work involved laying 100 kilometres of IT cabling, 40 kilometres of sprinkler piping and container conveyor technology with a total length of 1,000 metres. 2,000 containers can be taken in and out of the warehouse every hour. Technical highlights include the highly-automated picking system and the storage area, which is optimally managed and efficiently utilised according to the respective order load and capacity. HARTING technology can be seen as soon as you enter the premises, whereby approaching vehicles are recognised and the barrier lifted upon granting of access. RFID technology ensures that pallets are correctly placed and loaded.  A driverless transport system is responsible for transporting the goods between the halls and independently selects the optimum route. The highly flexible logistics of the EDC also enable a fast response to changed economic or political framework conditions such as trade barriers, for instance. 

Great emphasis was also placed on generating a sustainable energy supply. The power for the European Distribution Center is supplied by a photovoltaic system installed on the roof, while the energy requirements for cooling and heating are covered by internally produced biomethane and a geothermal plant – for which 36 holes needed to be drilled to a depth of 150m. The implemented energy concept minimises the Co2 emissions. The cost of the entire centre came in 27 percent lower than the figure originally calculated by the Kreditanstalt für Wiederaufbau (KfW). 140 employees work in the logistics centre in a two-shift system. Thanks to the ergonomic design of the workstations, where pallets can be lifted by almost a metre for picking, employees are relieved from having to bend over endlessly.

The offices and social spaces, reception, bistro with terrace and seating areas are all bright and friendly. With its white facade, the EDC is widely visible on its 8-hectare site on the L 770 in northwest Eselkamp.

Fine out more HERE.

Related Articles


Changing Scene


Sponsored Content
The Easy Way to the Industrial IoT

The way to the Industrial IoT does not have to be complicated. Whether access to valuable data is required or new, data-driven services are to be generated, Weidmuller enables its customers to go from data to value the easy way. Weidmuller’s comprehensive and cutting-edge IIoT portfolio applies to greenfield and brownfield applications. Weidmuller offers components and solutions from data acquisition, data pre-processing, data communication and data analysis.

Visit Weidmuller’s Industrial IoT Portfolio.


ADVANCED Motion Controls Takes Servo Drives to New Heights (and Depths) with FlexPro Extended Environment Product Line

Advanced Motion Controls is proud to announce the addition of six new CANopen servo drives with Extended Environment capabilities to their FlexPro line. These new drives join AMC’s existing EtherCAT Extended Environment FlexPro drives, making the FlexPro line the go-to solution for motion control applications in harsh environments.

Many motion control applications take place in conditions that are less than ideal, such as extreme temperatures, high and low pressures, shocks and vibrations, and contamination. Electronics, including servo drives, can malfunction or sustain permanent damage in these conditions.

Read More


Service Wire Co. Announces New Titles for Key Executives

Bruce Kesler and Mark Gatewood have been given new titles and responsibilities for Service Wire Co.

Bruce Kesler has assumed the role of Senior Director – Business Development. Bruce will be responsible for Service Wire’s largest strategic accounts and our growing Strategic Accounts Team.

Mark Gatewood has been promoted to the role of Vice President – Sales & Marketing. In this role, Gatewood will lead the efforts of Service Wire Company’s entire sales and marketing organization in all market verticals.

Read More


Tri-Mach Announces the Purchase of an Additional 45,000 sq ft. Facility

Tri-Mach Elmira Facility

Recently, Tri-Mach Inc. was thrilled to announce the addition of a new 45,000 sq ft. facility. Located at 285 Union St., Elmira, ON, this facility expands Tri-Mach’s capabilities, allowing them to better serve the growing needs of their customers.

Positioning for growth, this additional facility will allow Tri-Mach to continue taking on large-scale projects, enhance product performance testing, and provide equipment storage for their customers. The building will also be the new home to their Skilled Trades Centre of Excellence.

Read More


JMP Parent Company, CONVERGIX Acquires AGR Automation, Expanding Global Reach

Convergix Automation Solutions has completed the acquisition of AGR Automation (“AGR”), a UK-based provider of custom, high-performance automation design and systems integration primarily to the life sciences industry.

Following Convergix’s acquisitions of JMP Solutions in August 2021 and Classic Design in February 2022, AGR marks the third investment in Crestview’s strategy to build Convergix into a diversified automation solutions provider targeting the global $500+ billion market, with a particular focus on the $70 billion global systems integration and connectivity segments. Financial terms of the transaction were not disclosed.

Read More


Latest Articles

  • Implementing Functional Safety Requirements

    Implementing Functional Safety Requirements

    The Safety Functional Requirements Specification (SFRS; sometimes referred to as SRS or Safety Requirements Specification) is the plan for the safety controls on a machine and is the second step of the safety lifecycle. The SFRS document serves as a framework for the safety control system design, is informed by prior work done in the… Read More…

  • From Endress+Hauser, 24/7 Digital, Plant-Wide Health Monitoring for Rockwell Systems Optimizes Workflows and Processes

    From Endress+Hauser, 24/7 Digital, Plant-Wide Health Monitoring for Rockwell Systems Optimizes Workflows and Processes

    Endress+Hauser’s Asset Health Monitoring Solution–Rockwell Edition, now available for installation, provides operators with a centralized, digital overview of plant-wide device health to avoid unscheduled shutdowns and accelerate troubleshooting. It not only presents early visibility of problematic devices but distinguishes itself by adding likely causes and remedies to such a report so problems can be fixed… Read More…