The new SmartROC D65 performs best in the toughest of conditions

January 17, 2020

Norrbottens Bergteknik has extensive experience and expertise in drilling, blasting and reinforcement. The company has invested in four new SmartROC D65 rigs to strengthen its machinery and further develop its drilling projects in Aitik. Two of the rigs are now in place, making Norrbottens Bergteknik one of the first companies in the world to put the new generation SmartROC D65 into production.

Andreas Lundberg is the supervisor at Norrbottens Bergteknik:
“We are really looking forward to testing the new rig in Aitik. It’s a site with the harshest conditions possible for this type of work; up to minus forty Celsius, water and a lot of rock debris to handle. If it works in Aitik, it will work anywhere. There is no other site with tougher conditions.”

Norrbottens Bergteknik has operators with vast experience in working in Aitik; the unique conditions of the site and the extremely high demands they impose on both the operators and the machinery.

Andreas has high hopes for all the new features and the improved operator environment. He is also very keen to see whether automated operation will really be possible in Aitik.

 “Aitik is extreme. You sometimes have to drill in over seven meters of overburden to get to solid rock. In such cases, we work based on what we hear. We listen and adapt the drilling according to the sound of the hammer. It takes a lot of experience to work this way. I’m cautiously optimistic that this new technology will be able to handle the tough conditions better than experience.”

The overburden affects things and makes the work more difficult in a number of ways.

“When there is so much of loose material to handle, the hole collapses all the time. As soon as you pull the rod up, it collapses again. It’s very time-consuming work. At another location, you could drill five holes in the same amount of time.” 

This new rig manages the time aspect much better than its predecessor, mainly because it has the option of using longer drill rods. The new SmartROC D65 handles 8-meter lengths, which means that the operators do not need to change the rods as often. 

 “With the new SmartROC D65, we just need to add one rod instead of two as before. We will save a lot of time, especially if there is water. It’s really tough to try and join rods when there is a lot of water”.

BenchREMOTE operator station allows the operator to work from a safe distance and manage three rigs simultaneously, significantly boosting production capacity. Norrbottens Bergteknik estimates a considerably higher production rate. 

 “Having one operator covering two machines is just fantastic. Production will improve greatly, but it all centres around being able to rely hundred percent on these new automated systems. Naturally, we assume that everything will work out, and we are counting on this. We have been able to submit tenders for a significantly higher production rate thanks to our investment in the new SmartROC D65.”

Source

Related Articles


Changing Scene

  • Wesco Opens State-of-the-Art Facility in Eastern Canada to Support Influx of Megaprojects in the Region

    Wesco Opens State-of-the-Art Facility in Eastern Canada to Support Influx of Megaprojects in the Region

    Wesco International has recently announced the grand opening of a new state-of-the-art facility on Higney Avenue in Dartmouth, Nova Scotia, Canada, making this the largest facility of any distributor in the Atlantic region. The new building, facilitated by Touchette Real Estate, a division of Groupe Touchette, will feature Wesco’s comprehensive suite of services and solutions including… Read More…

  • PataBid Nominated for Canadian Choice Award in Software Services

    PataBid Nominated for Canadian Choice Award in Software Services

    PataBid is proud to announce its nomination for a Canadian Choice Award in the Software Services category. This recognition highlights PataBid’s commitment to supporting the electrical contracting community across Canada by providing innovative estimating software solutions that streamline estimating processes and ensure predictable and profitable projects. Read More…


Sponsored Content
The Easy Way to the Industrial IoT

The way to the Industrial IoT does not have to be complicated. Whether access to valuable data is required or new, data-driven services are to be generated, Weidmuller enables its customers to go from data to value the easy way. Weidmuller’s comprehensive and cutting-edge IIoT portfolio applies to greenfield and brownfield applications. Weidmuller offers components and solutions from data acquisition, data pre-processing, data communication and data analysis.

Visit Weidmuller’s Industrial IoT Portfolio.


ADVANCED Motion Controls Takes Servo Drives to New Heights (and Depths) with FlexPro Extended Environment Product Line

Advanced Motion Controls is proud to announce the addition of six new CANopen servo drives with Extended Environment capabilities to their FlexPro line. These new drives join AMC’s existing EtherCAT Extended Environment FlexPro drives, making the FlexPro line the go-to solution for motion control applications in harsh environments.

Many motion control applications take place in conditions that are less than ideal, such as extreme temperatures, high and low pressures, shocks and vibrations, and contamination. Electronics, including servo drives, can malfunction or sustain permanent damage in these conditions.

Read More


Service Wire Co. Announces New Titles for Key Executives

Bruce Kesler and Mark Gatewood have been given new titles and responsibilities for Service Wire Co.

Bruce Kesler has assumed the role of Senior Director – Business Development. Bruce will be responsible for Service Wire’s largest strategic accounts and our growing Strategic Accounts Team.

Mark Gatewood has been promoted to the role of Vice President – Sales & Marketing. In this role, Gatewood will lead the efforts of Service Wire Company’s entire sales and marketing organization in all market verticals.

Read More


Tri-Mach Announces the Purchase of an Additional 45,000 sq ft. Facility

Tri-Mach Elmira Facility

Recently, Tri-Mach Inc. was thrilled to announce the addition of a new 45,000 sq ft. facility. Located at 285 Union St., Elmira, ON, this facility expands Tri-Mach’s capabilities, allowing them to better serve the growing needs of their customers.

Positioning for growth, this additional facility will allow Tri-Mach to continue taking on large-scale projects, enhance product performance testing, and provide equipment storage for their customers. The building will also be the new home to their Skilled Trades Centre of Excellence.

Read More


JMP Parent Company, CONVERGIX Acquires AGR Automation, Expanding Global Reach

Convergix Automation Solutions has completed the acquisition of AGR Automation (“AGR”), a UK-based provider of custom, high-performance automation design and systems integration primarily to the life sciences industry.

Following Convergix’s acquisitions of JMP Solutions in August 2021 and Classic Design in February 2022, AGR marks the third investment in Crestview’s strategy to build Convergix into a diversified automation solutions provider targeting the global $500+ billion market, with a particular focus on the $70 billion global systems integration and connectivity segments. Financial terms of the transaction were not disclosed.

Read More


Latest Articles

  • How Advanced X-Ray and AI Inspection Technologies Optimize Quality Control and Reduce Costs in SMT Manufacturing

    How Advanced X-Ray and AI Inspection Technologies Optimize Quality Control and Reduce Costs in SMT Manufacturing

    Explore how Omron’s latest X-Ray machines and AI-driven solutions are setting new standards in manufacturing efficiency and quality control. The manufacturing landscape is swiftly evolving, and Omron is at the forefront with its innovative PCB inspection machines. These systems offer profound insights into SMT production process, enhanced quality control, and can significantly reduce labor costs. Advancements… Read More…

  • KUKA Establishes New Software and Digital Business Segment

    KUKA Establishes New Software and Digital Business Segment

    Software is playing an increasingly important role in mechanical engineering. What used to be mostly solved mechanically is now done by electronics and the associated software. “With KUKA Digital, we are expanding our offering in order to position ourselves broadly for a market with strong growth potential. Our customers need products, solutions and consulting approaches to digitalize… Read More…