Collaborative Robotics Open Doors for Manufacturing

JMP logo Frappier 400

January 27, 2020

Collaborative robots, or “cobots,” are highly productive automated systems. They can unlock new applications that have previously not been done with robots and employees or more experienced factory personnel from tasks that are repetitive and tedious.

Collaborative robots are intended for use in industrial settings by “collaborating” with human workers. Ideally, they combine the dexterity, flexibility and problem-solving skills of a person, with the strength, endurance and precision of a machine. These robots can safely work on tasks whether or not a human is working nearby.

A key driver for many manufacturers looking at robotic solutions is economics. Because the unemployment rate has dropped significantly, particularly in the area of general labour, and the minimum wage has increased, it is difficult to meet the demand for people. Robots can fill the gap – particularly if you can have them work with an operator so that the person can also be more productive.

Typically, cobots have advanced sensors and computing abilities that allow them to navigate complex environments in manufacturing plants. In manufacturing, they can be used for quality control such as detecting a defective part or product and removing them from a line. They can also manipulate materials that may be unsafe for humans to handle, say, in a chemical processing plant where working with chemicals can cause harm to a person.

Many cobots have found a home in smaller manufacturing operations where they can tend to machines in the plant, handle small parts easily and complete tasks like order picking in a warehouse. They are easily programmed and handled because they are “teachable”, allowing users to set up the robot to accomplish tasks that require different paths within a plant or are heavy to lift. They also provide a quick return on investment because of this ease of use. In operations where manufacturing processes are subject to change, these solutions can be easily reprogrammed and repositioned to keep the plant moving and products in production.

Cobots provide safe collaboration as they can share the same workspace with people without the need for “safety fences.” They don’t have sharp corners or exposed mechanical parts, so workers are not in danger of getting hurt by contact with the machine. However, if they do come in contact with a worker, they automatically stop – eliminating any chance of causing harm to the worker.

Another advantage of cobots is reduced downtime. Manufacturers need to employ robotics in their plants to stay competitive. Robots can be programmed to run simultaneously with other, more complex activities that need a human worker to complete; accomplishing more with less. Collaborative robotics can be used in multiple manufacturing industries like Food & Beverage and Automotive, and in various applications like pick and place, packaging, assembly, and dispensing.

Of course, manufacturers, in concert with their robotics integrator, should asses all risks associated with the installation and use of a Collaborative Robot application. All potential hazards must be addressed before the robot is put into production operating alongside a worker. Once done, these automated solutions can be the answer for manufacturers who need to increase operational efficiency, throughput and quality, all while protecting employees, the company, and maximizing process safety.

Source

Related Articles


Changing Scene

  • FANUC Canada Celebrates Grand Opening of New Headquarters

    FANUC Canada Celebrates Grand Opening of New Headquarters

    In a grand opening and ribbon cutting ceremony, FANUC recently unveiled its new Canadian Headquarters in Mississauga, Ontario to industry partners, customers and media. The new facility, which will serve as a hub for cutting-edge robotics technology, hosted more than 250 attendees in a celebration that included remarks from company leadership and advanced technology demonstrations. This milestone… Read More…

  • Hammond Manufacturing Welcomes John Eberhart as Territory Sales Manager for Northern, USA

    Hammond Manufacturing Welcomes John Eberhart as Territory Sales Manager for Northern, USA

    Hammond Manufacturing is pleased to announce the appointment of John Eberhart as the Territory Sales Manager for the Northern Midwest region of the United States in their Rack Mounting Solutions division. John’s extensive industry experience will be instrumental in the expansion of Hammond’s market presence and the promotion of business within his territory. John Eberhart… Read More…


Sponsored Content
The Easy Way to the Industrial IoT

The way to the Industrial IoT does not have to be complicated. Whether access to valuable data is required or new, data-driven services are to be generated, Weidmuller enables its customers to go from data to value the easy way. Weidmuller’s comprehensive and cutting-edge IIoT portfolio applies to greenfield and brownfield applications. Weidmuller offers components and solutions from data acquisition, data pre-processing, data communication and data analysis.

Visit Weidmuller’s Industrial IoT Portfolio.


ADVANCED Motion Controls Takes Servo Drives to New Heights (and Depths) with FlexPro Extended Environment Product Line

Advanced Motion Controls is proud to announce the addition of six new CANopen servo drives with Extended Environment capabilities to their FlexPro line. These new drives join AMC’s existing EtherCAT Extended Environment FlexPro drives, making the FlexPro line the go-to solution for motion control applications in harsh environments.

Many motion control applications take place in conditions that are less than ideal, such as extreme temperatures, high and low pressures, shocks and vibrations, and contamination. Electronics, including servo drives, can malfunction or sustain permanent damage in these conditions.

Read More


Service Wire Co. Announces New Titles for Key Executives

Bruce Kesler and Mark Gatewood have been given new titles and responsibilities for Service Wire Co.

Bruce Kesler has assumed the role of Senior Director – Business Development. Bruce will be responsible for Service Wire’s largest strategic accounts and our growing Strategic Accounts Team.

Mark Gatewood has been promoted to the role of Vice President – Sales & Marketing. In this role, Gatewood will lead the efforts of Service Wire Company’s entire sales and marketing organization in all market verticals.

Read More


Tri-Mach Announces the Purchase of an Additional 45,000 sq ft. Facility

Tri-Mach Elmira Facility

Recently, Tri-Mach Inc. was thrilled to announce the addition of a new 45,000 sq ft. facility. Located at 285 Union St., Elmira, ON, this facility expands Tri-Mach’s capabilities, allowing them to better serve the growing needs of their customers.

Positioning for growth, this additional facility will allow Tri-Mach to continue taking on large-scale projects, enhance product performance testing, and provide equipment storage for their customers. The building will also be the new home to their Skilled Trades Centre of Excellence.

Read More


JMP Parent Company, CONVERGIX Acquires AGR Automation, Expanding Global Reach

Convergix Automation Solutions has completed the acquisition of AGR Automation (“AGR”), a UK-based provider of custom, high-performance automation design and systems integration primarily to the life sciences industry.

Following Convergix’s acquisitions of JMP Solutions in August 2021 and Classic Design in February 2022, AGR marks the third investment in Crestview’s strategy to build Convergix into a diversified automation solutions provider targeting the global $500+ billion market, with a particular focus on the $70 billion global systems integration and connectivity segments. Financial terms of the transaction were not disclosed.

Read More


Latest Articles

  • Understanding Industrial Relay Contact Configurations: NO, NC, SPDT, and DPDT

    Understanding Industrial Relay Contact Configurations: NO, NC, SPDT, and DPDT

    Relays serve as the backbone of industrial control systems, enabling the control of high-power circuits using low-power signals. Understanding different relay contact configurations is crucial for designing effective control systems. This article will explore the various types of relay contacts and their applications in industrial automation. Read More…

  • Implementing Functional Safety Requirements

    Implementing Functional Safety Requirements

    The Safety Functional Requirements Specification (SFRS; sometimes referred to as SRS or Safety Requirements Specification) is the plan for the safety controls on a machine and is the second step of the safety lifecycle. The SFRS document serves as a framework for the safety control system design, is informed by prior work done in the… Read More…