Creativity & Connectivity through Cool Urban Spaces

January 28, 2020

A developer of distinctive urban workspace and data centre space in Canada’s major cities, Rittal provides knowledge-based organizations with distinctive environments for creativity and connectivity.

Design Dilemma

The Company was known initially for its leading role in the emergence of Class I workspaces, a format created through the adaptive re-use of light industrial structures to satisfy the needs of the most demanding office and retail users. Subsequently, their business expanded to urban missed-use properties and focused on urban intensification, as Canadians flocked to downtown locations to live, work, learn and play in greater numbers.

This resulted in a two-fold problem:

  • –   Lack of space in concentrated downtown office areas
  • –   Rising costs of grade A1 office space being converted into IT Rooms, resulting in a loss of revenue

The organization was looking to reclaim unused space in basements, parking or “grey areas” of buildings to be converted into smaller Datacenter Solutions that did not require “white room” conditions (Lab level clean rooms). They wanted to offer the solutions as a ‘Co-location of Rack space’ to their tenants in order to recoup the office floor space and add a new revenue stream.

Creating Cool Solutions

When Rittal reviewed the project, they realized that there was definitely a solution to the challenges being faced.

Climate control concepts from Rittal cover the full spectrum of applications, from cooling a single rack to entire data centres. Security plus optimum energy and cost efficiency are paramount. A diverse range of technical solutions creates individual climate control concepts for racks, suites and rooms.

  • –   Scaled-down Cooling & Installation: It was noted that a key requirement was lower cooling per rack, as well as quick and simple installation (where a Chilled water or larger commercial room cooling solution was not able to fit within the space).
  • –   Hybrid Design: Rittal saw a unique opportunity to offer an Edge LCP DX Solution in a Hybrid design. The front of the rack with LCP DX coolers would be a rack-based cooling solution that would blow cool air across equipment behind the glass doors to capture 100% of the cooling, while the back of the racks were designed with room heat exchange to capture not only the heat rejection from racks but from an uninterruptible power source (UPS) also located in the room.
  • –   Exterior Locations: The condenser units were positioned outside the building above a pedestrian walkway to avoid damage or obstruction. Due to the size, the units could be mounted on most exterior locations in urban areas which is useful when there is no availability of chilled water or sufficient space to place a larger roof cooler.
  • –   Space- saving: Minimal space was required for the redundant version by consolidation of cooling circuits in one unit.
  • –   Speed of delivery: The project took very little time from order to delivery to installation, minimizing downtime and not disrupting daily business.
  • –   Flexible design: With the flexibility in design provided by Rittal, the racks and coolers could be moved to other locations (within the building or a new location across town).
  • –   Minimal investment: The solution offered the opportunity to fulfill the current project objectives, and then grow on demand (pay as you grow).

Tim Rourke, President, Rittal Systems Ltd. said, “Rittal is delighted to support the creation of memorable urban workspaces in Canada. We specialize in developing customized IT cooling solutions for non-traditional IT environments, utilizing our diverse portfolio of data centre solutions to meet our clients’ goals of achieving the highest levels of creativity and connectivity!”

Source

Related Articles


Changing Scene

  • Wesco Opens State-of-the-Art Facility in Eastern Canada to Support Influx of Megaprojects in the Region

    Wesco Opens State-of-the-Art Facility in Eastern Canada to Support Influx of Megaprojects in the Region

    Wesco International has recently announced the grand opening of a new state-of-the-art facility on Higney Avenue in Dartmouth, Nova Scotia, Canada, making this the largest facility of any distributor in the Atlantic region. The new building, facilitated by Touchette Real Estate, a division of Groupe Touchette, will feature Wesco’s comprehensive suite of services and solutions including… Read More…

  • PataBid Nominated for Canadian Choice Award in Software Services

    PataBid Nominated for Canadian Choice Award in Software Services

    PataBid is proud to announce its nomination for a Canadian Choice Award in the Software Services category. This recognition highlights PataBid’s commitment to supporting the electrical contracting community across Canada by providing innovative estimating software solutions that streamline estimating processes and ensure predictable and profitable projects. Read More…


Sponsored Content
The Easy Way to the Industrial IoT

The way to the Industrial IoT does not have to be complicated. Whether access to valuable data is required or new, data-driven services are to be generated, Weidmuller enables its customers to go from data to value the easy way. Weidmuller’s comprehensive and cutting-edge IIoT portfolio applies to greenfield and brownfield applications. Weidmuller offers components and solutions from data acquisition, data pre-processing, data communication and data analysis.

Visit Weidmuller’s Industrial IoT Portfolio.


ADVANCED Motion Controls Takes Servo Drives to New Heights (and Depths) with FlexPro Extended Environment Product Line

Advanced Motion Controls is proud to announce the addition of six new CANopen servo drives with Extended Environment capabilities to their FlexPro line. These new drives join AMC’s existing EtherCAT Extended Environment FlexPro drives, making the FlexPro line the go-to solution for motion control applications in harsh environments.

Many motion control applications take place in conditions that are less than ideal, such as extreme temperatures, high and low pressures, shocks and vibrations, and contamination. Electronics, including servo drives, can malfunction or sustain permanent damage in these conditions.

Read More


Service Wire Co. Announces New Titles for Key Executives

Bruce Kesler and Mark Gatewood have been given new titles and responsibilities for Service Wire Co.

Bruce Kesler has assumed the role of Senior Director – Business Development. Bruce will be responsible for Service Wire’s largest strategic accounts and our growing Strategic Accounts Team.

Mark Gatewood has been promoted to the role of Vice President – Sales & Marketing. In this role, Gatewood will lead the efforts of Service Wire Company’s entire sales and marketing organization in all market verticals.

Read More


Tri-Mach Announces the Purchase of an Additional 45,000 sq ft. Facility

Tri-Mach Elmira Facility

Recently, Tri-Mach Inc. was thrilled to announce the addition of a new 45,000 sq ft. facility. Located at 285 Union St., Elmira, ON, this facility expands Tri-Mach’s capabilities, allowing them to better serve the growing needs of their customers.

Positioning for growth, this additional facility will allow Tri-Mach to continue taking on large-scale projects, enhance product performance testing, and provide equipment storage for their customers. The building will also be the new home to their Skilled Trades Centre of Excellence.

Read More


JMP Parent Company, CONVERGIX Acquires AGR Automation, Expanding Global Reach

Convergix Automation Solutions has completed the acquisition of AGR Automation (“AGR”), a UK-based provider of custom, high-performance automation design and systems integration primarily to the life sciences industry.

Following Convergix’s acquisitions of JMP Solutions in August 2021 and Classic Design in February 2022, AGR marks the third investment in Crestview’s strategy to build Convergix into a diversified automation solutions provider targeting the global $500+ billion market, with a particular focus on the $70 billion global systems integration and connectivity segments. Financial terms of the transaction were not disclosed.

Read More


Latest Articles

  • How Advanced X-Ray and AI Inspection Technologies Optimize Quality Control and Reduce Costs in SMT Manufacturing

    How Advanced X-Ray and AI Inspection Technologies Optimize Quality Control and Reduce Costs in SMT Manufacturing

    Explore how Omron’s latest X-Ray machines and AI-driven solutions are setting new standards in manufacturing efficiency and quality control. The manufacturing landscape is swiftly evolving, and Omron is at the forefront with its innovative PCB inspection machines. These systems offer profound insights into SMT production process, enhanced quality control, and can significantly reduce labor costs. Advancements… Read More…

  • KUKA Establishes New Software and Digital Business Segment

    KUKA Establishes New Software and Digital Business Segment

    Software is playing an increasingly important role in mechanical engineering. What used to be mostly solved mechanically is now done by electronics and the associated software. “With KUKA Digital, we are expanding our offering in order to position ourselves broadly for a market with strong growth potential. Our customers need products, solutions and consulting approaches to digitalize… Read More…