Understanding the Differences Between Calibration, Testing, and Validation

October 6, 2020

Calibration, testing, and validation are intertwined within the science field and it can be complicated when looking at the differences and true meanings.  Each activity is used to ensure quality in the measurement process and to comply as per the requirements of a standard.

Calibration the Scientific Definition

The operation under specified conditions, in a first step, establishes a relation between the quantity values with measurement uncertainties provided by measurement standards and corresponding indications with associated measurement uncertainties.  In the second step, it uses this information to establish a relation for obtaining a measurement result from an indication.

When a measurement device is calibrated it is compared to an accepted standard and adjustments are made it necessary.  It is imperative to use a lab that has an ISO 17025 accreditation. This accreditation means that the laboratory’s quality management system and technical competence have been evaluated by a third party.

The Definition of Testing and Functional Testing

A technical operation that consists of the determination of one or more characteristics of a given product, process, or service according to a specific procedure.

Functional testing determines if it is functioning correctly.  The testing involves exposing the item to a stimulus and verifying the equipment responds accordingly.

Definition of Validation

They fulfill confirmation by examination and provision of objective evidence that the particular requirements for a specific intended use.

Validation is for “ensuring” the acceptability of the implemented measurement process.  It is the combined effect of calibration and verification, but the final result is in the final output of the process.

The application in the calibration field is more on the development of a calibration procedure in order to meet certain requirements.

A non-standard method can be used in a calibration laboratory considering that they validate it before use.  Another application of validation is qualifying a group of measuring devices that function as a system.

Considerations During Calibration

During calibration, they must take the traceability and the computed measurement of uncertainty into consideration.

Your objective in performing calibration decision is specifically by customer requirements and regulatory authorities.  It is also by calibration procedures based on standard methods and procedures from manufacturers or original equipment manufacturer.

The steps performed during calibration:

  •    –   Choose the required calibration procedure.
  •    –   Compare to a reference standard.
  •    –   Determine the error.
  •    –   Adjust if capable.
  •    –   Check the traceability.
  •    –   Estimate the measurement of uncertainty.
  •    –   Record results to a calibration certificate.


Techniques Used for Method Validations per ISO 17025

  •    –   Calibration or evaluation of bias and precision using reference standards or reference materials
  •    –   Systematic assessment of the factors influencing the result.
  •    –   Testing method robustness through variation of controlled parameters, such as incubator temperature, volume dispensed.
  •    –   Comparison of results achieved with other validated methods.
  •    –   Interlaboratory comparisons
  •    –   The evaluation of measurement uncertainty of the results based on an understanding of the theoretical principled of the method and practical experience of the performance of the sampling or test method.


Calibration, Testing, and Validation

The reason that all of these three are performed is to ensure quality in the measurement process and to comply as per the requirements of a standard.  These standards are ISO 17025 and ISO 9001.  By understanding each of them it makes interpreting the standards much easier and when each usage is within the process.  If you ever have any questions about calibration or equipment, we are available to help.  At SRP control, we have been helping our clients with products, services, measurements, and calibration solutions for the past 40 years.  Let us help you find your next instrumentation or calibration solution.

Source

Related Articles


Changing Scene

  • Wesco Opens State-of-the-Art Facility in Eastern Canada to Support Influx of Megaprojects in the Region

    Wesco Opens State-of-the-Art Facility in Eastern Canada to Support Influx of Megaprojects in the Region

    Wesco International has recently announced the grand opening of a new state-of-the-art facility on Higney Avenue in Dartmouth, Nova Scotia, Canada, making this the largest facility of any distributor in the Atlantic region. The new building, facilitated by Touchette Real Estate, a division of Groupe Touchette, will feature Wesco’s comprehensive suite of services and solutions including… Read More…

  • PataBid Nominated for Canadian Choice Award in Software Services

    PataBid Nominated for Canadian Choice Award in Software Services

    PataBid is proud to announce its nomination for a Canadian Choice Award in the Software Services category. This recognition highlights PataBid’s commitment to supporting the electrical contracting community across Canada by providing innovative estimating software solutions that streamline estimating processes and ensure predictable and profitable projects. Read More…


Sponsored Content
The Easy Way to the Industrial IoT

The way to the Industrial IoT does not have to be complicated. Whether access to valuable data is required or new, data-driven services are to be generated, Weidmuller enables its customers to go from data to value the easy way. Weidmuller’s comprehensive and cutting-edge IIoT portfolio applies to greenfield and brownfield applications. Weidmuller offers components and solutions from data acquisition, data pre-processing, data communication and data analysis.

Visit Weidmuller’s Industrial IoT Portfolio.


ADVANCED Motion Controls Takes Servo Drives to New Heights (and Depths) with FlexPro Extended Environment Product Line

Advanced Motion Controls is proud to announce the addition of six new CANopen servo drives with Extended Environment capabilities to their FlexPro line. These new drives join AMC’s existing EtherCAT Extended Environment FlexPro drives, making the FlexPro line the go-to solution for motion control applications in harsh environments.

Many motion control applications take place in conditions that are less than ideal, such as extreme temperatures, high and low pressures, shocks and vibrations, and contamination. Electronics, including servo drives, can malfunction or sustain permanent damage in these conditions.

Read More


Service Wire Co. Announces New Titles for Key Executives

Bruce Kesler and Mark Gatewood have been given new titles and responsibilities for Service Wire Co.

Bruce Kesler has assumed the role of Senior Director – Business Development. Bruce will be responsible for Service Wire’s largest strategic accounts and our growing Strategic Accounts Team.

Mark Gatewood has been promoted to the role of Vice President – Sales & Marketing. In this role, Gatewood will lead the efforts of Service Wire Company’s entire sales and marketing organization in all market verticals.

Read More


Tri-Mach Announces the Purchase of an Additional 45,000 sq ft. Facility

Tri-Mach Elmira Facility

Recently, Tri-Mach Inc. was thrilled to announce the addition of a new 45,000 sq ft. facility. Located at 285 Union St., Elmira, ON, this facility expands Tri-Mach’s capabilities, allowing them to better serve the growing needs of their customers.

Positioning for growth, this additional facility will allow Tri-Mach to continue taking on large-scale projects, enhance product performance testing, and provide equipment storage for their customers. The building will also be the new home to their Skilled Trades Centre of Excellence.

Read More


JMP Parent Company, CONVERGIX Acquires AGR Automation, Expanding Global Reach

Convergix Automation Solutions has completed the acquisition of AGR Automation (“AGR”), a UK-based provider of custom, high-performance automation design and systems integration primarily to the life sciences industry.

Following Convergix’s acquisitions of JMP Solutions in August 2021 and Classic Design in February 2022, AGR marks the third investment in Crestview’s strategy to build Convergix into a diversified automation solutions provider targeting the global $500+ billion market, with a particular focus on the $70 billion global systems integration and connectivity segments. Financial terms of the transaction were not disclosed.

Read More


Latest Articles

  • How Advanced X-Ray and AI Inspection Technologies Optimize Quality Control and Reduce Costs in SMT Manufacturing

    How Advanced X-Ray and AI Inspection Technologies Optimize Quality Control and Reduce Costs in SMT Manufacturing

    Explore how Omron’s latest X-Ray machines and AI-driven solutions are setting new standards in manufacturing efficiency and quality control. The manufacturing landscape is swiftly evolving, and Omron is at the forefront with its innovative PCB inspection machines. These systems offer profound insights into SMT production process, enhanced quality control, and can significantly reduce labor costs. Advancements… Read More…

  • KUKA Establishes New Software and Digital Business Segment

    KUKA Establishes New Software and Digital Business Segment

    Software is playing an increasingly important role in mechanical engineering. What used to be mostly solved mechanically is now done by electronics and the associated software. “With KUKA Digital, we are expanding our offering in order to position ourselves broadly for a market with strong growth potential. Our customers need products, solutions and consulting approaches to digitalize… Read More…