Stay Cool and Connected…: It’s Time for Rittal’s Summer Cooling Promo on Climate Control Solutions

PB-44-Rittal-StayCoolAndConnected-400.jpg

May 11, 2021

Just in time for the warmer weather, Rittal is once again offering special promo prices on their market-leading enclosure cooling & monitoring solutions for industry and IT, that lower enclosure energy costs by up to 75% while boosting efficiency and ROI.

This year, Rittal is extending the Summer Cooling Promo to their IoT and CMC III monitoring devices, which are so essential in this new digital era, to ensure that enclosures and data centres are being cooled effectively even from remote locations.  After all, over-heating of precious equipment can cause huge losses.

What’s New: Promo Extended to Connectivity & Monitoring Devices

  • IoT Interface: is a central component for the intelligent networking of Rittal cooling solutions or sensors. This makes it easy to integrate all Blue e+ and Blue e+ chillers cooling units in an Industry 4.0 (IoT) environment. Rittal also offers a special adapter that can integrate existing Blue e cooling units into condition monitoring and IoT systems.
  • CMC III Processing Unit: is the central unit in the CMC III monitoring system. Up to 32/4 external sensors/CAN-Bus connection units can connect to the integral sensors, powered by the CMC III power pack.
  • CMC III Sensors: are ideal for monitoring a range of parameters in enclosures or rooms.

Industrial Climate Control systems offer huge energy savings

PB-44-Rittal-StayCoolAndConnected2-400.jpg

Rittal’s Blue e Climate control systems offer unmatched energy savings and cool features, while the top-notch roof-mounted fans are NEMA 12 out of the box, and NEMA 3R/4/4X with the rain hood. The new stainless-steel variants of the Blue e+ cooling unit series have been specially developed for demanding environmental conditions, where high levels of corrosion protection are needed. Also included in the summer promo, are Rittal’s Blue e, Wall-Mounted, UL Listed, Type 3R/4 air conditioning units, an excellent choice for indoor or outdoor enclosures where water is an issue. Click here for the AC Cooling Promo. Click here for the Fan Cooling Promo.

Cooling technology for Data Centres offer maximum efficiency in minimal space

Edge Data Centres are often located in harsh environments where protection of IT equipment is crucial. Our cooling & monitoring solutions are designed to operate in these environments by maintaining the proper conditions for IT equipment! The solutions are tailored to maximize the use of the rack space, control cooling and offer remote monitoring and management. Click here for the IT Cooling Promo.

For more information, visit www.rittal.ca/climatecontrol.

Related Articles

FLIR Launches Multiple Programs to Support U.S. Military Veterans

FLIR Launches Multiple Programs to Support U.S. Military Veterans

In the last quarter of 2019, FLIR Systems, Inc. announced an initiative to honor and support United States (U.S.) military veterans. As part of its FLIR HERO Corporate Social Responsibility (CSR) strategy, the company plans to double the percent of verified veterans employed at the company by the end of 2022. Also, through the FLIR TradeForce Program, it will offer free introductory-level infrared training and certification for U.S. military veterans transitioning to a skilled trade.

 

 

 

AutomationDirect: Additional Contrinex Small Rectangular Inductive Proximity Sensors

AutomationDirect: Additional Contrinex Small Rectangular Inductive Proximity Sensors

AutomationDirect has added more Contrinex small rectangular sensors to their extensive lineup of inductive proximity sensors. These compact 12mm x 27mm x 6.5mm and 12mm x 27mm x 12mm inductive proximity sensors are non-flush mounted, have a 4mm sensing distance, and feature NPN or PNP switching outputs with N.O. or N.C. operation. Top and front sensing versions are available and all PNP models are IO-Link v1.0 compatible. The sensors have a rugged polycarbonate housing with an IP67 protection rating and are CE marked, UL approved, and RoHS compliant.

PB-48-Pilz-PSENoptII-400.jpg

Safety Light Curtains PSENopt II From Pilz: World’s First UL-Certified Type 3 Light Curtain for USA and Canada – Opening the Market for Type 3

Type 3 PSENopt II safety light curtains have successfully undergone the certification process of UL, a major global safety science company. UL certification supports companies and users as they launch their products and systems on to the North American market.

 

 

 

Changing Scene

Sponsored Content
The Easy Way to the Industrial IoT

The way to the Industrial IoT does not have to be complicated. Whether access to valuable data is required or new, data-driven services are to be generated, Weidmuller enables its customers to go from data to value the easy way. Weidmuller’s comprehensive and cutting-edge IIoT portfolio applies to greenfield and brownfield applications. Weidmuller offers components and solutions from data acquisition, data pre-processing, data communication and data analysis.

Visit Weidmuller’s Industrial IoT Portfolio.

ADVANCED Motion Controls Takes Servo Drives to New Heights (and Depths) with FlexPro Extended Environment Product Line

Advanced Motion Controls is proud to announce the addition of six new CANopen servo drives with Extended Environment capabilities to their FlexPro line. These new drives join AMC’s existing EtherCAT Extended Environment FlexPro drives, making the FlexPro line the go-to solution for motion control applications in harsh environments.

Many motion control applications take place in conditions that are less than ideal, such as extreme temperatures, high and low pressures, shocks and vibrations, and contamination. Electronics, including servo drives, can malfunction or sustain permanent damage in these conditions.

Read More

Service Wire Co. Announces New Titles for Key Executives

Bruce Kesler and Mark Gatewood have been given new titles and responsibilities for Service Wire Co.

Bruce Kesler has assumed the role of Senior Director – Business Development. Bruce will be responsible for Service Wire’s largest strategic accounts and our growing Strategic Accounts Team.

Mark Gatewood has been promoted to the role of Vice President – Sales & Marketing. In this role, Gatewood will lead the efforts of Service Wire Company’s entire sales and marketing organization in all market verticals.

Read More

Tri-Mach Announces the Purchase of an Additional 45,000 sq ft. Facility

Tri-Mach Elmira Facility

Recently, Tri-Mach Inc. was thrilled to announce the addition of a new 45,000 sq ft. facility. Located at 285 Union St., Elmira, ON, this facility expands Tri-Mach’s capabilities, allowing them to better serve the growing needs of their customers.

Positioning for growth, this additional facility will allow Tri-Mach to continue taking on large-scale projects, enhance product performance testing, and provide equipment storage for their customers. The building will also be the new home to their Skilled Trades Centre of Excellence.

Read More

JMP Parent Company, CONVERGIX Acquires AGR Automation, Expanding Global Reach

Convergix Automation Solutions has completed the acquisition of AGR Automation (“AGR”), a UK-based provider of custom, high-performance automation design and systems integration primarily to the life sciences industry.

Following Convergix’s acquisitions of JMP Solutions in August 2021 and Classic Design in February 2022, AGR marks the third investment in Crestview’s strategy to build Convergix into a diversified automation solutions provider targeting the global $500+ billion market, with a particular focus on the $70 billion global systems integration and connectivity segments. Financial terms of the transaction were not disclosed.

Read More

Latest Articles

  • Implementing Functional Safety Requirements

    Implementing Functional Safety Requirements

    The Safety Functional Requirements Specification (SFRS; sometimes referred to as SRS or Safety Requirements Specification) is the plan for the safety controls on a machine and is the second step of the safety lifecycle. The SFRS document serves as a framework for the safety control system design, is informed by prior work done in the… Read More…

  • From Endress+Hauser, 24/7 Digital, Plant-Wide Health Monitoring for Rockwell Systems Optimizes Workflows and Processes

    From Endress+Hauser, 24/7 Digital, Plant-Wide Health Monitoring for Rockwell Systems Optimizes Workflows and Processes

    Endress+Hauser’s Asset Health Monitoring Solution–Rockwell Edition, now available for installation, provides operators with a centralized, digital overview of plant-wide device health to avoid unscheduled shutdowns and accelerate troubleshooting. It not only presents early visibility of problematic devices but distinguishes itself by adding likely causes and remedies to such a report so problems can be fixed… Read More…