HELUKABEL: Food & Beverage Cables

DCS-26-HELUKABEL-FoodBeverageCables-400.jpg

June 28, 2021

Health and safety might only be the second most important aspect of food products for consumers, after flavor, but food quality is just as important. When it comes to ensuring food safety and avoiding potential food epidemics, strict standards are placed on plants and machinery, which HELUKABEL meets and exceeds with their products.

For the processing and packaging machinery used in the food and beverage industry, HELUKABEL also offers a wide range of control cables, power supply cables, glands, connectors and conduits. Each component is resistant to the range of chemical, thermal and physical stresses that lead to degradation, in order to deliver reliable, efficient performance. To maintain their cleanliness, these cables are resistant to all standard detergents used during the cleaning process.

To stay ahead of future customer demand, the cables mentioned below were tested in accordance with ECOLAB test PM 40-1, which requires cables to be completely immersed in the various cleaning/disinfecting substances for up to 28 days at constant room temperature. Upon completion, the test cables are then subjected to visual inspection to see if any swelling, brittleness or discoloring occurred.

Source

Related Articles

ABB: New REX610 Relay Retrofit Program

ABB: New REX610 Relay Retrofit Program

Since the 1980s, ABB has installed more than 700,000 SPACOM relays used for power system protection and reliable power system operation world-wide. With the older generation of relays now aging, ABB has been actively developing new technology and expanding its service portfolio to replace select SPACOM relay types with REX610 relays. REX610 is the first all-in-one protection relay to support all basic power distribution applications with only six variants, making it easy to order, set up, use and service. This relay can be easily adapted during its entire lifetime to meet the shifting requirements for protection, communication and network.

LOVATO Electric: DMG Series Power Analyzers and Easy Branch Measuring System

LOVATO Electric: DMG Series Power Analyzers and Easy Branch Measuring System

LOVATO Electric presents DMG, a new generation of power analyzers with widescreen LCD colour display. The large widescreen LCD colour display (4.3″) ensures clear, legible reading of mains analysis parameters, all while maintaining the classic drilling template (92x92mm) to ensure perfect compatibility with standard front panel solutions. The measurements are displayed as waveform graphics, polar diagrams and harmonic spectra up to the 63rd order, thus offering everything needed to analyse the condition of the system.

Han Ex

HARTING Han Ex Connectors for Explosive Environments Now Available in North America

HARTING’s Han Ex connector series have been certified to the National Electric Code’s NEC 500 standard for use in Class I, Division II hazardous locations, making them available for use across North America. An ideal alternative to hard-wiring electrical connections, the Han Ex range is particularly well-suited for applications in the oil and gas, mining and chemical industries and in process automation.

 

 

Changing Scene

  • Wesco Opens State-of-the-Art Facility in Eastern Canada to Support Influx of Megaprojects in the Region

    Wesco Opens State-of-the-Art Facility in Eastern Canada to Support Influx of Megaprojects in the Region

    Wesco International has recently announced the grand opening of a new state-of-the-art facility on Higney Avenue in Dartmouth, Nova Scotia, Canada, making this the largest facility of any distributor in the Atlantic region. The new building, facilitated by Touchette Real Estate, a division of Groupe Touchette, will feature Wesco’s comprehensive suite of services and solutions including… Read More…

  • PataBid Nominated for Canadian Choice Award in Software Services

    PataBid Nominated for Canadian Choice Award in Software Services

    PataBid is proud to announce its nomination for a Canadian Choice Award in the Software Services category. This recognition highlights PataBid’s commitment to supporting the electrical contracting community across Canada by providing innovative estimating software solutions that streamline estimating processes and ensure predictable and profitable projects. Read More…

Sponsored Content
The Easy Way to the Industrial IoT

The way to the Industrial IoT does not have to be complicated. Whether access to valuable data is required or new, data-driven services are to be generated, Weidmuller enables its customers to go from data to value the easy way. Weidmuller’s comprehensive and cutting-edge IIoT portfolio applies to greenfield and brownfield applications. Weidmuller offers components and solutions from data acquisition, data pre-processing, data communication and data analysis.

Visit Weidmuller’s Industrial IoT Portfolio.

ADVANCED Motion Controls Takes Servo Drives to New Heights (and Depths) with FlexPro Extended Environment Product Line

Advanced Motion Controls is proud to announce the addition of six new CANopen servo drives with Extended Environment capabilities to their FlexPro line. These new drives join AMC’s existing EtherCAT Extended Environment FlexPro drives, making the FlexPro line the go-to solution for motion control applications in harsh environments.

Many motion control applications take place in conditions that are less than ideal, such as extreme temperatures, high and low pressures, shocks and vibrations, and contamination. Electronics, including servo drives, can malfunction or sustain permanent damage in these conditions.

Read More

Service Wire Co. Announces New Titles for Key Executives

Bruce Kesler and Mark Gatewood have been given new titles and responsibilities for Service Wire Co.

Bruce Kesler has assumed the role of Senior Director – Business Development. Bruce will be responsible for Service Wire’s largest strategic accounts and our growing Strategic Accounts Team.

Mark Gatewood has been promoted to the role of Vice President – Sales & Marketing. In this role, Gatewood will lead the efforts of Service Wire Company’s entire sales and marketing organization in all market verticals.

Read More

Tri-Mach Announces the Purchase of an Additional 45,000 sq ft. Facility

Tri-Mach Elmira Facility

Recently, Tri-Mach Inc. was thrilled to announce the addition of a new 45,000 sq ft. facility. Located at 285 Union St., Elmira, ON, this facility expands Tri-Mach’s capabilities, allowing them to better serve the growing needs of their customers.

Positioning for growth, this additional facility will allow Tri-Mach to continue taking on large-scale projects, enhance product performance testing, and provide equipment storage for their customers. The building will also be the new home to their Skilled Trades Centre of Excellence.

Read More

JMP Parent Company, CONVERGIX Acquires AGR Automation, Expanding Global Reach

Convergix Automation Solutions has completed the acquisition of AGR Automation (“AGR”), a UK-based provider of custom, high-performance automation design and systems integration primarily to the life sciences industry.

Following Convergix’s acquisitions of JMP Solutions in August 2021 and Classic Design in February 2022, AGR marks the third investment in Crestview’s strategy to build Convergix into a diversified automation solutions provider targeting the global $500+ billion market, with a particular focus on the $70 billion global systems integration and connectivity segments. Financial terms of the transaction were not disclosed.

Read More

Latest Articles

  • How Advanced X-Ray and AI Inspection Technologies Optimize Quality Control and Reduce Costs in SMT Manufacturing

    How Advanced X-Ray and AI Inspection Technologies Optimize Quality Control and Reduce Costs in SMT Manufacturing

    Explore how Omron’s latest X-Ray machines and AI-driven solutions are setting new standards in manufacturing efficiency and quality control. The manufacturing landscape is swiftly evolving, and Omron is at the forefront with its innovative PCB inspection machines. These systems offer profound insights into SMT production process, enhanced quality control, and can significantly reduce labor costs. Advancements… Read More…

  • KUKA Establishes New Software and Digital Business Segment

    KUKA Establishes New Software and Digital Business Segment

    Software is playing an increasingly important role in mechanical engineering. What used to be mostly solved mechanically is now done by electronics and the associated software. “With KUKA Digital, we are expanding our offering in order to position ourselves broadly for a market with strong growth potential. Our customers need products, solutions and consulting approaches to digitalize… Read More…