Hammond Manufacturing: Type 4 Two Door Freestanding Enclosure

PB-56-Hammond-Type4Enclosure-400.jpg

April 26, 2022

Introducing Hammond Manufacturing’s Type 4 two-door freestanding enclosure, which is designed to house electrical, electronic, hydraulic or pneumatic controls and instruments, and provides protection where equipment may be hosed down or otherwise be very wet, or in specific applications.

Construction

  •    –   Formed 12 gauge steel.
  •    –   Smooth, continuously welded seams without knockouts, cutouts or holes.
  •    –   Heavy duty stainless steel lifting eyebolts are provided with reinforcing support angles.
  •    –   Doors are supported with heavy gauge continuous hinges.
  •    –   Dual Access versions have doors front and back.
  •    –   3-pt padlocking door handle.
  •    –   Seamless poured-in place gasket.
  •    –   A grounding stud is provided in the enclosure and a bonding stud is provided on the door.
  •    –   Center post is removable for easy installation of the inner panel.


Standards

  •    –   UL 508A Type 3R, 4 and 12
  •    –   CSA Type 3R, 4 and 12
  •    –   Complies with:
    •       –   NEMA Type 3R, 4, 12 and 13
    •       –   IEC 60529, IP66


Finish

  •    –   Cover and enclosure are finished in recoatable smooth ANSI 61 gray powder coating.
  •    –   Optional inner panels are available in white powder coating, or unpainted galvanized steel.

Source

Related Articles

Schneider Electric Digitizes Load Management and Launches Tesys Island as a Leap Forward for OEMs in Their Industry 4.0 Journey

Schneider Electric Digitizes Load Management and Launches Tesys Island as a Leap Forward for OEMs in Their Industry 4.0 Journey

To make machines smarter and help reduce machine stoppages and downtime for unprecedented productivity, Schneider Electric recently launched TeSys island, a digital load management system. The new connected digitally starters into machine control panels, allowing fast installation and configuration for the direct control and management of low voltage loads thanks to an end-to-end digital customer experience.

 

 

 

Pilz

Configurable Control Systems PNOZmulti 2 for PROFINET and Ethernet/IP

 

The configurable control system PNOZmulti 2 for safety and automation from Pilz, a world leader in Automation Safety, has two new communication modules for connection to Ethernet-based systems. With these, the base unit can now be expanded on the left-hand side and can easily be connected to PROFINET or Ethernet/IP networks.

 

 

AEMC PowerPad III 8336 Power Quality Analyzer w/4 AmpFlex sensors

AEMC PowerPad III 8336 Power Quality Analyzer w/4 AmpFlex sensors

 

The PowerPad III Model 8336 is a three-phase power quality analyzer that is easy-to-use, compact and shock resistant. It enables technicians and engineers to measure and carry out diagnostics and power quality work on one-, two- or three- phase networks. Five voltage and four current inputs are provided. It is IEC 61000-4-30 Class B and safety rated to 600V CAT IV.

 

 

Changing Scene

Sponsored Content
The Easy Way to the Industrial IoT

The way to the Industrial IoT does not have to be complicated. Whether access to valuable data is required or new, data-driven services are to be generated, Weidmuller enables its customers to go from data to value the easy way. Weidmuller’s comprehensive and cutting-edge IIoT portfolio applies to greenfield and brownfield applications. Weidmuller offers components and solutions from data acquisition, data pre-processing, data communication and data analysis.

Visit Weidmuller’s Industrial IoT Portfolio.

ADVANCED Motion Controls Takes Servo Drives to New Heights (and Depths) with FlexPro Extended Environment Product Line

Advanced Motion Controls is proud to announce the addition of six new CANopen servo drives with Extended Environment capabilities to their FlexPro line. These new drives join AMC’s existing EtherCAT Extended Environment FlexPro drives, making the FlexPro line the go-to solution for motion control applications in harsh environments.

Many motion control applications take place in conditions that are less than ideal, such as extreme temperatures, high and low pressures, shocks and vibrations, and contamination. Electronics, including servo drives, can malfunction or sustain permanent damage in these conditions.

Read More

Service Wire Co. Announces New Titles for Key Executives

Bruce Kesler and Mark Gatewood have been given new titles and responsibilities for Service Wire Co.

Bruce Kesler has assumed the role of Senior Director – Business Development. Bruce will be responsible for Service Wire’s largest strategic accounts and our growing Strategic Accounts Team.

Mark Gatewood has been promoted to the role of Vice President – Sales & Marketing. In this role, Gatewood will lead the efforts of Service Wire Company’s entire sales and marketing organization in all market verticals.

Read More

Tri-Mach Announces the Purchase of an Additional 45,000 sq ft. Facility

Tri-Mach Elmira Facility

Recently, Tri-Mach Inc. was thrilled to announce the addition of a new 45,000 sq ft. facility. Located at 285 Union St., Elmira, ON, this facility expands Tri-Mach’s capabilities, allowing them to better serve the growing needs of their customers.

Positioning for growth, this additional facility will allow Tri-Mach to continue taking on large-scale projects, enhance product performance testing, and provide equipment storage for their customers. The building will also be the new home to their Skilled Trades Centre of Excellence.

Read More

JMP Parent Company, CONVERGIX Acquires AGR Automation, Expanding Global Reach

Convergix Automation Solutions has completed the acquisition of AGR Automation (“AGR”), a UK-based provider of custom, high-performance automation design and systems integration primarily to the life sciences industry.

Following Convergix’s acquisitions of JMP Solutions in August 2021 and Classic Design in February 2022, AGR marks the third investment in Crestview’s strategy to build Convergix into a diversified automation solutions provider targeting the global $500+ billion market, with a particular focus on the $70 billion global systems integration and connectivity segments. Financial terms of the transaction were not disclosed.

Read More

Latest Articles

  • Implementing Functional Safety Requirements

    Implementing Functional Safety Requirements

    The Safety Functional Requirements Specification (SFRS; sometimes referred to as SRS or Safety Requirements Specification) is the plan for the safety controls on a machine and is the second step of the safety lifecycle. The SFRS document serves as a framework for the safety control system design, is informed by prior work done in the… Read More…

  • From Endress+Hauser, 24/7 Digital, Plant-Wide Health Monitoring for Rockwell Systems Optimizes Workflows and Processes

    From Endress+Hauser, 24/7 Digital, Plant-Wide Health Monitoring for Rockwell Systems Optimizes Workflows and Processes

    Endress+Hauser’s Asset Health Monitoring Solution–Rockwell Edition, now available for installation, provides operators with a centralized, digital overview of plant-wide device health to avoid unscheduled shutdowns and accelerate troubleshooting. It not only presents early visibility of problematic devices but distinguishes itself by adding likely causes and remedies to such a report so problems can be fixed… Read More…