EPLAN Data Portal Update 01 December 2023

December 7, 2023

In this update of the EPLAN Data Portal, there are now a total of 472 manufacturers and almost 1,560,000 data sets are available with the update on December 05, 2023.

New manufacturer catalogs for Data Portal

  • FRABA GmbH – 35,570 new data sets with sensors
  • Triamec Motion AG  – 2,938 new data sets with amplifiers and controllers
  • ULVAC CRYOGENICS INCORPORATED – 6 new data sets with cables and signal devices
  • ULVAC, Inc. – 1 new data set with signal devices

Data Portal updated and new data

  • ABB LTD – 6 new data sets with converters
  • Balluff GmbH – 99 new and 2 updated data sets with cables, plugs, sensors, voltage sources and generators
  • Banner Engineering Corporation  – 45 new data sets with lights, sensors, switches and pushbuttons and transmission paths
  • Beijer Electronics AB – 9 new data sets with transmission paths
  • Bosch Rexroth AG – 20 updated data sets with sensors, switches and pushbuttons
  • Eaton Industries GmbH – 53 new and 2,048 updated data sets with contactors, protection devices, power switchgear, relays and transformers
  • Fagor Automation, S. Coop. – 7 new and 2 updated data sets with converters
  • ifm electronic gmbh – 4 new data sets with cables, sensors, switches and pushbuttons
  • KALEJA GmbH – 2 updated data sets with amplifiers and controllers
  • Lenze SE – 4 new and 55 updated data sets with converters, filters and terminators
  • Leuze electronic GmbH + Co. KG – 1 new data set with cables
  • OMRON Corporation – 11 new and 456 updated data sets with PLC, sensors, switches and pushbuttons
  • Phoenix Contact GmbH & Co. KG – 20 new and 34 updated data sets with general, protection devices, PLC, terminals and voltage sources and generators
  • Pilz GmbH & Co. KG – 3 new and 10 updated data sets with cables, sensors, switches and pushbuttons and plugs
  • Rittal GmbH & Co. KG – 8 new and 437 updated data sets with routing accessories, lock systems, housing accessories interal extensions, housing accessories external extensions, enclosures, busbars, sensors, switches and pushbuttons, lights, electrical engineering – special items, cables
  • Schneider Electric SA – 26 new and 213 updated data sets with amplifiers, controllers, electrical engineering – special items, PLC, cables, terminals, voltage sources and generator, relays, contactors
  • SHODEN CORPORATION – 21 new data sets with protection devices
  • Siemens AG – 668 new and 167 updated data sets with voltage sources and generators, motors and PLC
  • WAGO GmbH & Co. KG – 315 new and 811 updated data sets with terminals
  • Weidmueller Group – 2 new and 1 updated data sets with PLC
  • YUEQING DAHE ELECTRIC Co., Ltd. – 10,912 new data sets with sensor, switches and pusbuttons and signal devices

Data Portal Summary

  • 4 new manufacturer
  • 21 updated manufacturer
  • 50,729 new data sets
  • 4,258 updated data sets
  • 218 deleted data sets
  • 50,336 new parts with EDS
  • In total 965,203 parts with EDS
  • In total 319 manufacturers with EDS parts
  • In total 1,559,866 data sets live in EDP

Source

Related Articles

Proax logo 400

Proax Technologies Announces the launch of its enhanced mechanical team and product offering

With over 55 years as an Industrial Automation Distributor, Proax has once again expanded its product offering and technical expertise to provide more versatility and superior mechanical solutions. Their new offering includes a specialized team dedicated to mechanical solutions, several new industry leading product lines, and a new online robotic configurator.

 

 

 

HELUKABEL White Paper: “PUR or PVC”

HELUKABEL White Paper: “PUR or PVC”

The jacket material is a key factor when looking for the right cables and wires. The outer jacket performs a multitude of functions that ensure the durability, safety and performance of the cable or wire. Users must often choose between polyurethane (PUR) and polyvinyl chloride (PVC). In HELUKABEL’s new white paper “PUR or PVC”, you will learn about the different properties of these two materials, and which applications they are best suited for. This white paper is available immediately to download for free.

Changing Scene

Sponsored Content
The Easy Way to the Industrial IoT

The way to the Industrial IoT does not have to be complicated. Whether access to valuable data is required or new, data-driven services are to be generated, Weidmuller enables its customers to go from data to value the easy way. Weidmuller’s comprehensive and cutting-edge IIoT portfolio applies to greenfield and brownfield applications. Weidmuller offers components and solutions from data acquisition, data pre-processing, data communication and data analysis.

Visit Weidmuller’s Industrial IoT Portfolio.

ADVANCED Motion Controls Takes Servo Drives to New Heights (and Depths) with FlexPro Extended Environment Product Line

Advanced Motion Controls is proud to announce the addition of six new CANopen servo drives with Extended Environment capabilities to their FlexPro line. These new drives join AMC’s existing EtherCAT Extended Environment FlexPro drives, making the FlexPro line the go-to solution for motion control applications in harsh environments.

Many motion control applications take place in conditions that are less than ideal, such as extreme temperatures, high and low pressures, shocks and vibrations, and contamination. Electronics, including servo drives, can malfunction or sustain permanent damage in these conditions.

Read More

Service Wire Co. Announces New Titles for Key Executives

Bruce Kesler and Mark Gatewood have been given new titles and responsibilities for Service Wire Co.

Bruce Kesler has assumed the role of Senior Director – Business Development. Bruce will be responsible for Service Wire’s largest strategic accounts and our growing Strategic Accounts Team.

Mark Gatewood has been promoted to the role of Vice President – Sales & Marketing. In this role, Gatewood will lead the efforts of Service Wire Company’s entire sales and marketing organization in all market verticals.

Read More

Tri-Mach Announces the Purchase of an Additional 45,000 sq ft. Facility

Tri-Mach Elmira Facility

Recently, Tri-Mach Inc. was thrilled to announce the addition of a new 45,000 sq ft. facility. Located at 285 Union St., Elmira, ON, this facility expands Tri-Mach’s capabilities, allowing them to better serve the growing needs of their customers.

Positioning for growth, this additional facility will allow Tri-Mach to continue taking on large-scale projects, enhance product performance testing, and provide equipment storage for their customers. The building will also be the new home to their Skilled Trades Centre of Excellence.

Read More

JMP Parent Company, CONVERGIX Acquires AGR Automation, Expanding Global Reach

Convergix Automation Solutions has completed the acquisition of AGR Automation (“AGR”), a UK-based provider of custom, high-performance automation design and systems integration primarily to the life sciences industry.

Following Convergix’s acquisitions of JMP Solutions in August 2021 and Classic Design in February 2022, AGR marks the third investment in Crestview’s strategy to build Convergix into a diversified automation solutions provider targeting the global $500+ billion market, with a particular focus on the $70 billion global systems integration and connectivity segments. Financial terms of the transaction were not disclosed.

Read More

Latest Articles

  • Automated Test Equipment (ATE) Revival: Repurposing and Extending the Life of Aging ATE Systems

    Automated Test Equipment (ATE) Revival: Repurposing and Extending the Life of Aging ATE Systems

    Automated Test Equipment (ATE) and Automated Test Systems (ATS) serve the critical purpose of ensuring that electronic devices operate according to specifications in the field. As such, these systems are widely utilized for testing automotive electronics, batteries, telecom infrastructure, renewable energy systems, and consumer electronics. The aerospace and defense sectors also make substantial investments in… Read More…

  • Partner Country Canada at HANNOVER MESSE 2025: The Future’s Here

    Partner Country Canada at HANNOVER MESSE 2025: The Future’s Here

    Canada is Partner Country of HANNOVER MESSE 2025, underscoring the strong economic and political ties between “The True North” and Germany. Canada announced its Partner Country commitment in August 2022 when Canadian Prime Minister Justin Trudeau hosted German Chancellor Olaf Scholz in Canada. Canada’s starring role from 31 March to 4 April 2025 at HANNOVER… Read More…