Littelfuse SPD2 1P+0 Series Surge Protection

December 14, 2023

The SPD2 1P+0 series is a surge protection device that safeguards components from transient overvoltage or surges that last micro-seconds by limiting the fault current to a load or the unit being protected. The majority of surges are caused by equipment being turned on or off within a facility. By limiting these surges, costly damage, downtime, repairs, and missed deadlines can be mitigated. The surge protection devices for the 1+0 configuration are available for 60 V to 600 V nominal voltage sub-distribution board applications.

SPD2 1P+0 Features

  • Capability to clamp and withstand high-energy transients
  • UL Recognized and VDE-IEC compliant in single part number
  • Interlocking tab mechanism
  • No additional overcurrent protection devices required in UL applications
  • Compact footprint
  • Visual life indicator
  • Pluggable modules
  • Thermal protection
  • IP20 protection rating

Go HERE for more information.

Related Articles

EXAIR’s New Catalog 35 Features New Products, Standards and Information to Solve Manufacturing Problems
|

EXAIR’s New Catalog 35 Features New Products, Standards and Information to Solve Manufacturing Problems

The demands of the average manufacturing process are constantly evolving, and it becomes increasingly important to understand how to best provide safety and efficiency to unique environments. It’s for this reason that EXAIR is delighted to present the new Catalog 35; a full-color technical guide offering innovative solutions to common industrial conveying, cooling, cleaning, blowoff, drying, coating and static electricity problems.

Festo Introduces the VAEM Valve Controller for Multi-Head Liquid Dispensing

Festo Introduces the VAEM Valve Controller for Multi-Head Liquid Dispensing

Festo’s new compact VAEM solenoid valve controller for multi-head micro-dispensing in pharmaceutical manufacturing and laboratory applications provides individualized control and calibration of up to eight solenoid valves. The compact, lightweight and energy-efficient VAEM is ideal for applications requiring high speed and a low coefficient of variation (CV).

 

 

 

Balluff’s Inductive Factor 1 Sensors Detect Ferrous and Non-ferrous Metals Reliably at the Same Rated Switching Distance

Balluff’s Inductive Factor 1 Sensors Detect Ferrous and Non-ferrous Metals Reliably at the Same Rated Switching Distance

Balluff’s new generation of high-precision inductive factor 1 sensors accurately detect ferrous (iron-based) metals like steel and non-ferrous metals like aluminum and brass at the same rated switching distance. Typical inductive sensors have a reduced range for non-ferrous metal, requiring a correcting factor to calculate their switching distance. Not so with Factor 1 sensors; they detect both types of metal with no correction factor needed.

 

 

 

Schneider Electric

Schneider Electric’s EcoStruxure Triconex Tricon CX v11.3 Controller Enables Profitable Safety for High-Hazard Industries

 

Schneider Electric, the leader in the digital transformation of energy management and automation, has released Tricon CX version 11.3, the most powerful version of its EcoStruxure Triconex safety instrumented system.

 

 

Changing Scene

  • Wesco Opens State-of-the-Art Facility in Eastern Canada to Support Influx of Megaprojects in the Region

    Wesco Opens State-of-the-Art Facility in Eastern Canada to Support Influx of Megaprojects in the Region

    Wesco International has recently announced the grand opening of a new state-of-the-art facility on Higney Avenue in Dartmouth, Nova Scotia, Canada, making this the largest facility of any distributor in the Atlantic region. The new building, facilitated by Touchette Real Estate, a division of Groupe Touchette, will feature Wesco’s comprehensive suite of services and solutions including… Read More…

  • PataBid Nominated for Canadian Choice Award in Software Services

    PataBid Nominated for Canadian Choice Award in Software Services

    PataBid is proud to announce its nomination for a Canadian Choice Award in the Software Services category. This recognition highlights PataBid’s commitment to supporting the electrical contracting community across Canada by providing innovative estimating software solutions that streamline estimating processes and ensure predictable and profitable projects. Read More…

Sponsored Content
The Easy Way to the Industrial IoT

The way to the Industrial IoT does not have to be complicated. Whether access to valuable data is required or new, data-driven services are to be generated, Weidmuller enables its customers to go from data to value the easy way. Weidmuller’s comprehensive and cutting-edge IIoT portfolio applies to greenfield and brownfield applications. Weidmuller offers components and solutions from data acquisition, data pre-processing, data communication and data analysis.

Visit Weidmuller’s Industrial IoT Portfolio.

ADVANCED Motion Controls Takes Servo Drives to New Heights (and Depths) with FlexPro Extended Environment Product Line

Advanced Motion Controls is proud to announce the addition of six new CANopen servo drives with Extended Environment capabilities to their FlexPro line. These new drives join AMC’s existing EtherCAT Extended Environment FlexPro drives, making the FlexPro line the go-to solution for motion control applications in harsh environments.

Many motion control applications take place in conditions that are less than ideal, such as extreme temperatures, high and low pressures, shocks and vibrations, and contamination. Electronics, including servo drives, can malfunction or sustain permanent damage in these conditions.

Read More

Service Wire Co. Announces New Titles for Key Executives

Bruce Kesler and Mark Gatewood have been given new titles and responsibilities for Service Wire Co.

Bruce Kesler has assumed the role of Senior Director – Business Development. Bruce will be responsible for Service Wire’s largest strategic accounts and our growing Strategic Accounts Team.

Mark Gatewood has been promoted to the role of Vice President – Sales & Marketing. In this role, Gatewood will lead the efforts of Service Wire Company’s entire sales and marketing organization in all market verticals.

Read More

Tri-Mach Announces the Purchase of an Additional 45,000 sq ft. Facility

Tri-Mach Elmira Facility

Recently, Tri-Mach Inc. was thrilled to announce the addition of a new 45,000 sq ft. facility. Located at 285 Union St., Elmira, ON, this facility expands Tri-Mach’s capabilities, allowing them to better serve the growing needs of their customers.

Positioning for growth, this additional facility will allow Tri-Mach to continue taking on large-scale projects, enhance product performance testing, and provide equipment storage for their customers. The building will also be the new home to their Skilled Trades Centre of Excellence.

Read More

JMP Parent Company, CONVERGIX Acquires AGR Automation, Expanding Global Reach

Convergix Automation Solutions has completed the acquisition of AGR Automation (“AGR”), a UK-based provider of custom, high-performance automation design and systems integration primarily to the life sciences industry.

Following Convergix’s acquisitions of JMP Solutions in August 2021 and Classic Design in February 2022, AGR marks the third investment in Crestview’s strategy to build Convergix into a diversified automation solutions provider targeting the global $500+ billion market, with a particular focus on the $70 billion global systems integration and connectivity segments. Financial terms of the transaction were not disclosed.

Read More

Latest Articles

  • How Advanced X-Ray and AI Inspection Technologies Optimize Quality Control and Reduce Costs in SMT Manufacturing

    How Advanced X-Ray and AI Inspection Technologies Optimize Quality Control and Reduce Costs in SMT Manufacturing

    Explore how Omron’s latest X-Ray machines and AI-driven solutions are setting new standards in manufacturing efficiency and quality control. The manufacturing landscape is swiftly evolving, and Omron is at the forefront with its innovative PCB inspection machines. These systems offer profound insights into SMT production process, enhanced quality control, and can significantly reduce labor costs. Advancements… Read More…

  • KUKA Establishes New Software and Digital Business Segment

    KUKA Establishes New Software and Digital Business Segment

    Software is playing an increasingly important role in mechanical engineering. What used to be mostly solved mechanically is now done by electronics and the associated software. “With KUKA Digital, we are expanding our offering in order to position ourselves broadly for a market with strong growth potential. Our customers need products, solutions and consulting approaches to digitalize… Read More…