Wago: I/O-Link 1-Channel Analog Input
January 11, 2024
WAGO’s new IP67 rated I/O-Link Analog Converters offer a solid and cost-effective solution for incorporating conventional analog sensors and actuators with IO-Link communications. The 1-Channel Analog Input (part #765-2701/200-000) comes equipped with a digital display that reports measure value configured with two-point scaling.
1-Channel Analog Input Application:
Decentralized display, preprocessing and conversion of analog signals
Use as an IO-Link device:
The device has an IO-Link communication interface that requires an IO-Link-capable module (IO-Link master) for interoperation. The IO-Link interface allows direct access to the process and diagnostic data and enables setting of the device parameters during operation.
Use as a stand-alone device without IO-Link:
The device compares the measured current value with the set parameters and switches the output according to the selected function. This mode is without IO-Link functionality. Parameterization is performed either via the push ring or with the WAGO IO-Link Configurator.