EPLAN Data Portal Update 02 January 2024

February 1, 2024

In this update of the EPLAN Data Portal, there are now a total of 479 manufacturers and more than 1,633,000 data sets are available with the update on January 30, 2024.

New manufacturer catalogs for Data Portal

  • Guangdong Kossi Intelligent Technology Co. Ltd. – 215 new data sets with amplifiers, controllers and motors
  • Servotronix Motion Control Ltd. – 14 new data sets with amplifiers and controllers

Data Portal updated and new data

  • ABB LTD – 2 new data sets with sensors, switches and pushbuttons
  • Banner Engineering Corporation – 106 updated data sets with sensors, switches and pushbuttons
  • Baumer MDS GmbH – 12 updated data sets with sensors, switches and pushbuttons
  • Danfoss Drives A/S – 30 new data sets with converters
  • ETI Elektroelement d.d. – 19 updated data sets with power switchgears
  • Fagor Automation, S. Coop – 2 updated data sets with PLC
  • FRABA GmbH – 32,756 updated data sets with sensors
  • Festo SE & Co. KG – 218 new and 35,341 updated data sets with accessories, actuators, amplifiers, cables, controllers, connections, connection splicer / line connector enclosures, converters, engineering- special items, electrically – operated mechanical device, filters, fluid control terminal, fluid power – special items, general, inductors, lights, measuring instruments, miscellaneous, motors, PLC, plugs, resistors, sensors, switches, and pushbuttons, Signal devices, test devices, voltage sources and generators, sub plates, valves
  • Fuji Electric FA Components & Systems Co., Ltd. – 722 new data set with converters, sensors, switches and pushbuttons
  • Igus GmbH – 11 new and 1,516 updated data sets with cables
  • Janitza electronics GmbH (NFPA) – 8 new data sets with converters, measuring instruments, test devices, voltage sources and generators
  • K. A. Schmersal GmbH & Co. KG – 1 new data set with sensors, switches and pushbuttons
  • KEYENCE CORPORATION – 5 new data sets with sensors, switches and pushbuttons
  • KALEJA GmbH – 4 updated data sets with amplifiers and controllers
  • Murrelektronik GmbH – 2,545 new and 388 updated data sets with cables
  • Nanjing Decowell Automation Co., Ltd. – 47 updated data sets with field distribution devices and PLC
  • Omron Europe B.V. – 85 new and 567 updated data sets with amplifiers, converters, controllers, generals, sensors, switches and pushbuttons and PLC
  • Pilz GmbH & Co. KG – 1 new data set with plugs
  • Schneider Electric SA – 15 new data sets with PLC
  • Siemens AG – 10 new and 87 updated data sets with PLC, voltages sources and generators
  • Ningbo Supu Electronics Co., Ltd. – 168 new data sets with sensors, switches and pushbuttons and terminals
  • Suzhou Inovance Technology Co., Ltd. – 13 new data sets with converters and PLC
  • WAGO GmbH & Co. KG – 58 new and 789 updated data sets with contactors, plugs, relays and terminals

Data Portal Summary

  • 2 new manufacturer
  • 22 updated manufacturer
  • 36,877 new data sets
  • 38,878 updated data sets
  • 0 deleted data sets
  • 37,912 new parts with EDS
  • In total 1,040,831 parts with EDS
  • In total 326 manufacturers with EDS parts
  • In total 1,633,555 data sets live in EDP

Source

Related Articles

DCS 5 Littelfuse logo 400

Littelfuse IX4351NE SiC MOSFET & IGBT Driver Wins Annual Power Product Award

Littelfuse, Inc. recently announced its IX4351NE SiC MOSFET and IGBT Driver has been named a Green Energy Award Winner for 21ic.com’s 2020 Annual Power Product Awards. Held for the last 17 years, these awards recognize and honor the best products throughout the world that succeed in energy conservation and environmental protection.

 

 

 

PB 25 Rockwell newlogo 400

Rockwell Automation and PTC Celebrate First Year of Partnership With Momentum, Customer Growth, and Industry Recognition in Digital Transformation

Rockwell Automation today announced strong market momentum for its PTC partnership and joint digital transformation solutions. This performance includes a year of major achievements spanning new customers and use cases, innovations designed to accelerate the integration of OT and IT systems, and wide-spread industry recognition for the two companies’ combined industrial software suite, FactoryTalk InnovationSuite, powered by PTC.

 

 

 

Changing Scene

  • Wesco Opens State-of-the-Art Facility in Eastern Canada to Support Influx of Megaprojects in the Region

    Wesco Opens State-of-the-Art Facility in Eastern Canada to Support Influx of Megaprojects in the Region

    Wesco International has recently announced the grand opening of a new state-of-the-art facility on Higney Avenue in Dartmouth, Nova Scotia, Canada, making this the largest facility of any distributor in the Atlantic region. The new building, facilitated by Touchette Real Estate, a division of Groupe Touchette, will feature Wesco’s comprehensive suite of services and solutions including… Read More…

  • PataBid Nominated for Canadian Choice Award in Software Services

    PataBid Nominated for Canadian Choice Award in Software Services

    PataBid is proud to announce its nomination for a Canadian Choice Award in the Software Services category. This recognition highlights PataBid’s commitment to supporting the electrical contracting community across Canada by providing innovative estimating software solutions that streamline estimating processes and ensure predictable and profitable projects. Read More…

Sponsored Content
The Easy Way to the Industrial IoT

The way to the Industrial IoT does not have to be complicated. Whether access to valuable data is required or new, data-driven services are to be generated, Weidmuller enables its customers to go from data to value the easy way. Weidmuller’s comprehensive and cutting-edge IIoT portfolio applies to greenfield and brownfield applications. Weidmuller offers components and solutions from data acquisition, data pre-processing, data communication and data analysis.

Visit Weidmuller’s Industrial IoT Portfolio.

ADVANCED Motion Controls Takes Servo Drives to New Heights (and Depths) with FlexPro Extended Environment Product Line

Advanced Motion Controls is proud to announce the addition of six new CANopen servo drives with Extended Environment capabilities to their FlexPro line. These new drives join AMC’s existing EtherCAT Extended Environment FlexPro drives, making the FlexPro line the go-to solution for motion control applications in harsh environments.

Many motion control applications take place in conditions that are less than ideal, such as extreme temperatures, high and low pressures, shocks and vibrations, and contamination. Electronics, including servo drives, can malfunction or sustain permanent damage in these conditions.

Read More

Service Wire Co. Announces New Titles for Key Executives

Bruce Kesler and Mark Gatewood have been given new titles and responsibilities for Service Wire Co.

Bruce Kesler has assumed the role of Senior Director – Business Development. Bruce will be responsible for Service Wire’s largest strategic accounts and our growing Strategic Accounts Team.

Mark Gatewood has been promoted to the role of Vice President – Sales & Marketing. In this role, Gatewood will lead the efforts of Service Wire Company’s entire sales and marketing organization in all market verticals.

Read More

Tri-Mach Announces the Purchase of an Additional 45,000 sq ft. Facility

Tri-Mach Elmira Facility

Recently, Tri-Mach Inc. was thrilled to announce the addition of a new 45,000 sq ft. facility. Located at 285 Union St., Elmira, ON, this facility expands Tri-Mach’s capabilities, allowing them to better serve the growing needs of their customers.

Positioning for growth, this additional facility will allow Tri-Mach to continue taking on large-scale projects, enhance product performance testing, and provide equipment storage for their customers. The building will also be the new home to their Skilled Trades Centre of Excellence.

Read More

JMP Parent Company, CONVERGIX Acquires AGR Automation, Expanding Global Reach

Convergix Automation Solutions has completed the acquisition of AGR Automation (“AGR”), a UK-based provider of custom, high-performance automation design and systems integration primarily to the life sciences industry.

Following Convergix’s acquisitions of JMP Solutions in August 2021 and Classic Design in February 2022, AGR marks the third investment in Crestview’s strategy to build Convergix into a diversified automation solutions provider targeting the global $500+ billion market, with a particular focus on the $70 billion global systems integration and connectivity segments. Financial terms of the transaction were not disclosed.

Read More

Latest Articles

  • How Advanced X-Ray and AI Inspection Technologies Optimize Quality Control and Reduce Costs in SMT Manufacturing

    How Advanced X-Ray and AI Inspection Technologies Optimize Quality Control and Reduce Costs in SMT Manufacturing

    Explore how Omron’s latest X-Ray machines and AI-driven solutions are setting new standards in manufacturing efficiency and quality control. The manufacturing landscape is swiftly evolving, and Omron is at the forefront with its innovative PCB inspection machines. These systems offer profound insights into SMT production process, enhanced quality control, and can significantly reduce labor costs. Advancements… Read More…

  • KUKA Establishes New Software and Digital Business Segment

    KUKA Establishes New Software and Digital Business Segment

    Software is playing an increasingly important role in mechanical engineering. What used to be mostly solved mechanically is now done by electronics and the associated software. “With KUKA Digital, we are expanding our offering in order to position ourselves broadly for a market with strong growth potential. Our customers need products, solutions and consulting approaches to digitalize… Read More…