EPLAN Data Portal Update 02 March 2024

April 8, 2024

In this update of the EPLAN Data Portal, there are now a total of 484 manufacturers and more than 1,690,000 data sets are available with the update on March 21, 2024.

New manufacturer catalogs for Data Portal

  • lnventronics GmbH – 8 new data sets with electrical engineering – special items

Data Portal updated and new data

  • Bachmann electronic GmbH – 1 new data set with PLC
  • Balluff GmbH – 4 new and 1 data sets with PLC and sensors
  • Banner Engineering Corporation – 76 new data sets with lights, sensors, switches and pushbuttons and transmission paths
  • Danfoss Drives A/S – 40 new and 14 updated data sets with converters and routing accessories
  • Delta Electronics, Inc. – 69 updated data sets with converters
  • FRABA GmbH – 2,172 new data sets with sensors, switches and pushbuttons
  • ifm electronic gmbh – 4 new and 5 updated data sets with sensors, switches and pushbuttons
  • K. A. Schmersal GmbH & Co. KG – 17 updated data sets with sensors, switches and pushbuttons
  • KALEJA GmbH – 4 updated data sets with amplifiers and controllers
  • KBR Kompensationsanlagenbau GmbH – 6 new and 13 updated data sets with amplifiers, controllers, measuring instruments, semiconductors and test devices
  • Lenze SE – 3 updated data sets with PLC
  • Leuze electronic GmbH + Co. KG – 2 updated data sets with signal devices
  • Murrelektronik GmbH – 2,321 new and 1 updated data sets with cables
  • OMRON Corporation – 14 new data sets with contactors, generals, relays, sensors, switches and pushbuttons, voltage sources and generators
  • Oriental Motor – 978 new and 1,028 updated data sets with amplifiers, controllers and motors
  • PHOENIX CONTACT GmbH & Co. KG – 113 new and 171 updated data sets with contactors, housing accessories, field distribution devices, measuring instruments, PLC, plugs, power switchgear, relays, terminals, voltage sources and generators
  • Pepperl + Fuchs SE – 7 new data sets with sensors
  • Pilz GmbH & Co. KG – 2 new and 129 updated data sets with cables, connection splicer / line connectors, PLC, plugs, sensors, switches and pushbuttons
  • Rittal GmbH & Co. KG – 9 updated data sets with housing accessories – external extensions and housings
  • SEW-EURODRIVE GmbH & Co. KG – 17 new data sets with converters, generals and PLC
  • Sick AG – 188 new and 1,185 updated data sets with sensors
  • Siemens AG – 9 new and 4 updated data sets with PLC and protection devices
  • TE Connectivity – 1 new data set with filters and terminators
  • Weidmueller Group – 45 new and 33 updated data sets with terminals

Data Portal Summary

  • 1 new manufacturer
  • 27 updated manufacturer
  • 6,075 new data sets
  • 3,390 updated data sets
  • 93 deleted data sets
  • 5,736 new parts with EDS
  • In total 1,100,451parts with EDS
  • In total 333 manufacturers with EDS parts
  • In total 1,691,644 data sets live in EDP

Source

Related Articles


Changing Scene

  • Wesco Opens State-of-the-Art Facility in Eastern Canada to Support Influx of Megaprojects in the Region

    Wesco Opens State-of-the-Art Facility in Eastern Canada to Support Influx of Megaprojects in the Region

    Wesco International has recently announced the grand opening of a new state-of-the-art facility on Higney Avenue in Dartmouth, Nova Scotia, Canada, making this the largest facility of any distributor in the Atlantic region. The new building, facilitated by Touchette Real Estate, a division of Groupe Touchette, will feature Wesco’s comprehensive suite of services and solutions including… Read More…

  • PataBid Nominated for Canadian Choice Award in Software Services

    PataBid Nominated for Canadian Choice Award in Software Services

    PataBid is proud to announce its nomination for a Canadian Choice Award in the Software Services category. This recognition highlights PataBid’s commitment to supporting the electrical contracting community across Canada by providing innovative estimating software solutions that streamline estimating processes and ensure predictable and profitable projects. Read More…


Sponsored Content
The Easy Way to the Industrial IoT

The way to the Industrial IoT does not have to be complicated. Whether access to valuable data is required or new, data-driven services are to be generated, Weidmuller enables its customers to go from data to value the easy way. Weidmuller’s comprehensive and cutting-edge IIoT portfolio applies to greenfield and brownfield applications. Weidmuller offers components and solutions from data acquisition, data pre-processing, data communication and data analysis.

Visit Weidmuller’s Industrial IoT Portfolio.


ADVANCED Motion Controls Takes Servo Drives to New Heights (and Depths) with FlexPro Extended Environment Product Line

Advanced Motion Controls is proud to announce the addition of six new CANopen servo drives with Extended Environment capabilities to their FlexPro line. These new drives join AMC’s existing EtherCAT Extended Environment FlexPro drives, making the FlexPro line the go-to solution for motion control applications in harsh environments.

Many motion control applications take place in conditions that are less than ideal, such as extreme temperatures, high and low pressures, shocks and vibrations, and contamination. Electronics, including servo drives, can malfunction or sustain permanent damage in these conditions.

Read More


Service Wire Co. Announces New Titles for Key Executives

Bruce Kesler and Mark Gatewood have been given new titles and responsibilities for Service Wire Co.

Bruce Kesler has assumed the role of Senior Director – Business Development. Bruce will be responsible for Service Wire’s largest strategic accounts and our growing Strategic Accounts Team.

Mark Gatewood has been promoted to the role of Vice President – Sales & Marketing. In this role, Gatewood will lead the efforts of Service Wire Company’s entire sales and marketing organization in all market verticals.

Read More


Tri-Mach Announces the Purchase of an Additional 45,000 sq ft. Facility

Tri-Mach Elmira Facility

Recently, Tri-Mach Inc. was thrilled to announce the addition of a new 45,000 sq ft. facility. Located at 285 Union St., Elmira, ON, this facility expands Tri-Mach’s capabilities, allowing them to better serve the growing needs of their customers.

Positioning for growth, this additional facility will allow Tri-Mach to continue taking on large-scale projects, enhance product performance testing, and provide equipment storage for their customers. The building will also be the new home to their Skilled Trades Centre of Excellence.

Read More


JMP Parent Company, CONVERGIX Acquires AGR Automation, Expanding Global Reach

Convergix Automation Solutions has completed the acquisition of AGR Automation (“AGR”), a UK-based provider of custom, high-performance automation design and systems integration primarily to the life sciences industry.

Following Convergix’s acquisitions of JMP Solutions in August 2021 and Classic Design in February 2022, AGR marks the third investment in Crestview’s strategy to build Convergix into a diversified automation solutions provider targeting the global $500+ billion market, with a particular focus on the $70 billion global systems integration and connectivity segments. Financial terms of the transaction were not disclosed.

Read More


Latest Articles

  • How Advanced X-Ray and AI Inspection Technologies Optimize Quality Control and Reduce Costs in SMT Manufacturing

    How Advanced X-Ray and AI Inspection Technologies Optimize Quality Control and Reduce Costs in SMT Manufacturing

    Explore how Omron’s latest X-Ray machines and AI-driven solutions are setting new standards in manufacturing efficiency and quality control. The manufacturing landscape is swiftly evolving, and Omron is at the forefront with its innovative PCB inspection machines. These systems offer profound insights into SMT production process, enhanced quality control, and can significantly reduce labor costs. Advancements… Read More…

  • KUKA Establishes New Software and Digital Business Segment

    KUKA Establishes New Software and Digital Business Segment

    Software is playing an increasingly important role in mechanical engineering. What used to be mostly solved mechanically is now done by electronics and the associated software. “With KUKA Digital, we are expanding our offering in order to position ourselves broadly for a market with strong growth potential. Our customers need products, solutions and consulting approaches to digitalize… Read More…