XP Power: JMR03/10/20 Series Ultra-Compact, Medically Approved, 4:1 Input DC-DC Converters for BF and CF Rated Applications

September 9, 2024

XP Power has recently introduces the JMR03/10/20 series of 3W, 10W, and 20W ultra-compact, medically approved DC-DC converters that offer a wide 4:1 input ratio, making them suitable for various input requirements.

These devices provide 2 x MOPP (Means of Patient Protection) with just 2µA leakage current, ensuring easy integration into both BF (Body Floating) and CF (Cardiac Floating) rated healthcare applications. 

One of the standout features of these devices is their low no-load input idle current (down to 4mA, depending on the model), which increases efficiency, reduces waste heat, and extends the runtime of battery-powered portable equipment. The compact design of the JMR03/10/20 series saves valuable PCB real estate, allowing designers more space for their applications. These robust, fully encapsulated products are suited for use in various mechanically stressful applications, including medical imaging, patient monitoring, patient treatment, dentistry, and respiratory care equipment.

Models within the JMR03 (3.5W), JMR10 (10W), and JMR20 (20W) series are available with output voltages of 5V, 12V, 15V ±12V or ±15V – the JMR10/20 series have an additional ±5V output. The dual-output models can also provide a single 10V, 24V or 30V output. The single output models can also be adjusted by -10% to +10% of the output voltage for non-standard requirements. All output power and voltage combinations can operate from either a 24V (9.0-36.0V) or 48V (18.0-75.0V) input, with the JMR03/10 series additionally operating from a 12V (4.5-18V) input.

The operating temperature range for the JMR03/10/20 series is from -40°C to +100°C. All models are protected against short circuit and overload conditions, feature a remote on/off function, and have an input-to-output isolation voltage of 5kVac. Safety certification includes UL/CSA/IEC/EN 60601-1 and UL62368-1 with CE and UKCA markings for the low voltage and RoHS Directives.

The JMR03/10/20 series are available from Avnet Abacus, Digi-Key, Distrelec, Farnell, Mouser, RS Components, approved regional distributors, or direct from XP Power and offer a 3-year warranty.

Source

Related Articles

Brass-Bodied NSF Approved Potable Water Solenoid Valves from AutomationDirect

Brass-Bodied NSF Approved Potable Water Solenoid Valves from AutomationDirect

Since 1960 ODE has been one of the leaders in designing and manufacturing a complete line of solenoid valves. National Sanitation Foundation (NSF) certified lead-free brass-bodied water valves from ODE are an excellent choice for food and beverage grade potable water applications where products can be consumed by humans. Two types of these brass solenoid valves are available; direct acting, and pilot control solenoid valves. Both types of valves are 2-port, 2-position, normally closed.

 

 

 

Bender Consolidates LifeGuard Technology, Expediting Ordering Process

Bender Consolidates LifeGuard Technology, Expediting Ordering Process

Bender has made changes to the LifeGuard product line in order to consolidate similar models, reducing the complexity from 3,600 models down to 18 models. Bender’s LifeGuard panels ensure that facilities receive the latest in ground-fault protection–every model can now be used for up to 600 V, any phase configuration, and all models will detect both AC and DC ground faults.

 

 

 

Changing Scene

  • Phoenix Contact Announces Planned Leadership Change

    Phoenix Contact Announces Planned Leadership Change

    Recently, Pheonix Contact Ltd. Canada was pleased to announce a planned leadership change taking place during September and October 2024. Roger Hallett, who has been the company’s President since July 2019 will step down during this period to be replaced by Martin Stephenson. Phoenix Contact Canada wishes to thank Roger for his leadership over the… Read More…

  • ABB Opens Expanded Electrical Products Manufacturing Facility in Pointe-Claire Canada

    ABB Opens Expanded Electrical Products Manufacturing Facility in Pointe-Claire Canada

    ABB’s Installation Products Division in Canada has recently opened its newly expanded electrification products manufacturing facility in Pointe-Claire, Quebec. In addition to nearly doubling the size of the facility, ABB’s US$12 million investment creates 40 full-time jobs and doubles production capacity to help meet growing demand for electrical solutions used across North America. Read More…

Sponsored Content
The Easy Way to the Industrial IoT

The way to the Industrial IoT does not have to be complicated. Whether access to valuable data is required or new, data-driven services are to be generated, Weidmuller enables its customers to go from data to value the easy way. Weidmuller’s comprehensive and cutting-edge IIoT portfolio applies to greenfield and brownfield applications. Weidmuller offers components and solutions from data acquisition, data pre-processing, data communication and data analysis.

Visit Weidmuller’s Industrial IoT Portfolio.

ADVANCED Motion Controls Takes Servo Drives to New Heights (and Depths) with FlexPro Extended Environment Product Line

Advanced Motion Controls is proud to announce the addition of six new CANopen servo drives with Extended Environment capabilities to their FlexPro line. These new drives join AMC’s existing EtherCAT Extended Environment FlexPro drives, making the FlexPro line the go-to solution for motion control applications in harsh environments.

Many motion control applications take place in conditions that are less than ideal, such as extreme temperatures, high and low pressures, shocks and vibrations, and contamination. Electronics, including servo drives, can malfunction or sustain permanent damage in these conditions.

Read More

Service Wire Co. Announces New Titles for Key Executives

Bruce Kesler and Mark Gatewood have been given new titles and responsibilities for Service Wire Co.

Bruce Kesler has assumed the role of Senior Director – Business Development. Bruce will be responsible for Service Wire’s largest strategic accounts and our growing Strategic Accounts Team.

Mark Gatewood has been promoted to the role of Vice President – Sales & Marketing. In this role, Gatewood will lead the efforts of Service Wire Company’s entire sales and marketing organization in all market verticals.

Read More

Tri-Mach Announces the Purchase of an Additional 45,000 sq ft. Facility

Tri-Mach Elmira Facility

Recently, Tri-Mach Inc. was thrilled to announce the addition of a new 45,000 sq ft. facility. Located at 285 Union St., Elmira, ON, this facility expands Tri-Mach’s capabilities, allowing them to better serve the growing needs of their customers.

Positioning for growth, this additional facility will allow Tri-Mach to continue taking on large-scale projects, enhance product performance testing, and provide equipment storage for their customers. The building will also be the new home to their Skilled Trades Centre of Excellence.

Read More

JMP Parent Company, CONVERGIX Acquires AGR Automation, Expanding Global Reach

Convergix Automation Solutions has completed the acquisition of AGR Automation (“AGR”), a UK-based provider of custom, high-performance automation design and systems integration primarily to the life sciences industry.

Following Convergix’s acquisitions of JMP Solutions in August 2021 and Classic Design in February 2022, AGR marks the third investment in Crestview’s strategy to build Convergix into a diversified automation solutions provider targeting the global $500+ billion market, with a particular focus on the $70 billion global systems integration and connectivity segments. Financial terms of the transaction were not disclosed.

Read More

Latest Articles

  • Embracing Vendor-Agnostic Network Technologies for System Integrators

    Embracing Vendor-Agnostic Network Technologies for System Integrators

    The COVID-19 pandemic presented system integrators with a unique opportunity to evaluate manufacturer performance during a global disruption. Throughout this period, there have been numerous instances where end users have successfully utilized their diversified supply chains to enhance production by integrating more device-level components into their existing factory setups. This strategy has enabled teams to… Read More…

  • Enhancing Food and Beverage Manufacturing with Motion Control

    Enhancing Food and Beverage Manufacturing with Motion Control

    Reliability in automation motion control is crucial for original equipment manufacturers (OEMs), directly influencing machine efficiency and production costs. Key factors such as servo position accuracy, trajectory repeatability, and system efficiency are essential for maintaining high performance and competitiveness. OEMs must balance the addition of advanced features with profitability, ensuring their equipment meets customer expectations… Read More…