Knipex: 9″ StepCut XL Cable Shears-1000V Insulated

October 8, 2024

StepCut XL Features

  • High-leverage joint, long handles and optimized cutting edges for an easier cut than with compact cable shears
  •  Cuts solid copper or aluminum cables up to 2 AWG, stranded cables up to 2/0 AWG and fine stranded cables up to 4/0 AWG
  •  Dual cutting areas: step cutting edges position cables close to the joint and the front cutting edge is used for the gradual cutting (“nibbling”) of larger cables
  •  Easy one- or two-handed operation with minimal handle opening for large cable diameters
  •  Slim head for better accessibility
  •  Not suitable for steel-reinforced cables, e.g. ACSR
  •  Adjustable, high-leverage bolted joint provides precise and smooth cutting
  •  Pinch guard prevents operators’ fingers being pinched
  •  Laser-hardened cutting edges (approx. 56 HRC)
  •  1000V multi-component grips, ASTM F1505-tested
  •  High-grade special tool steel; forged; oil-hardened

Go HERE for more information

Related Articles

SCHUNK: Slim 5-Axis Vise With Tool-Free Jaw Quick-Change and Active Jaw Pull-Down for Precise Machining of the Sixth Side

SCHUNK: Slim 5-Axis Vise With Tool-Free Jaw Quick-Change and Active Jaw Pull-Down for Precise Machining of the Sixth Side

If you think that the innovation potential of stationary clamping system is already ex-hausted, you should have a look at SCHUNK: The specialist for gripping systems and clamping technology continues its success story with the 5-axis vise KONTEC KSX-C2 and provides new impulses for high-precision 6-sided machining.

 

 

 

Hammond Manufacturing: DTI Series Semi-Recessed Indoor Air Conditioner for Clean Enclosure Cooling

Hammond Manufacturing: DTI Series Semi-Recessed Indoor Air Conditioner for Clean Enclosure Cooling

Introducing the DTI Series semi-recessed indoor air conditioners from Hammond Manufacturing, designed for recessed mounting on any enclosure surface where high capacity system cooling is required. Closed loop cooling ensures clean enclosure air is recirculated without ever mixing with contaminated ambient air, and optimum air circulation is achieved with maximum clearance distance between the warm inlet and cold outlet for reduced hot spot locations. A condenser with 3 mm fin spacing provides highly effective protection against strongly contaminated and aggressive ambient air.

PB-63-Littelfuse-KnowledgeCenter-400.jpg

New Littelfuse Knowledge Center Helps Customers Prevent Ground-Fault Hazards

Littelfuse, Inc. introduces a new ground-fault knowledge center for engineers, electricians, maintenance workers, and others to create a safer electrical environment. The resource portal provides educational material including defining ground faults, explaining misconceptions, and offering solutions on how to prevent ground-faults.

 

 

 

Changing Scene

Sponsored Content
The Easy Way to the Industrial IoT

The way to the Industrial IoT does not have to be complicated. Whether access to valuable data is required or new, data-driven services are to be generated, Weidmuller enables its customers to go from data to value the easy way. Weidmuller’s comprehensive and cutting-edge IIoT portfolio applies to greenfield and brownfield applications. Weidmuller offers components and solutions from data acquisition, data pre-processing, data communication and data analysis.

Visit Weidmuller’s Industrial IoT Portfolio.

ADVANCED Motion Controls Takes Servo Drives to New Heights (and Depths) with FlexPro Extended Environment Product Line

Advanced Motion Controls is proud to announce the addition of six new CANopen servo drives with Extended Environment capabilities to their FlexPro line. These new drives join AMC’s existing EtherCAT Extended Environment FlexPro drives, making the FlexPro line the go-to solution for motion control applications in harsh environments.

Many motion control applications take place in conditions that are less than ideal, such as extreme temperatures, high and low pressures, shocks and vibrations, and contamination. Electronics, including servo drives, can malfunction or sustain permanent damage in these conditions.

Read More

Service Wire Co. Announces New Titles for Key Executives

Bruce Kesler and Mark Gatewood have been given new titles and responsibilities for Service Wire Co.

Bruce Kesler has assumed the role of Senior Director – Business Development. Bruce will be responsible for Service Wire’s largest strategic accounts and our growing Strategic Accounts Team.

Mark Gatewood has been promoted to the role of Vice President – Sales & Marketing. In this role, Gatewood will lead the efforts of Service Wire Company’s entire sales and marketing organization in all market verticals.

Read More

Tri-Mach Announces the Purchase of an Additional 45,000 sq ft. Facility

Tri-Mach Elmira Facility

Recently, Tri-Mach Inc. was thrilled to announce the addition of a new 45,000 sq ft. facility. Located at 285 Union St., Elmira, ON, this facility expands Tri-Mach’s capabilities, allowing them to better serve the growing needs of their customers.

Positioning for growth, this additional facility will allow Tri-Mach to continue taking on large-scale projects, enhance product performance testing, and provide equipment storage for their customers. The building will also be the new home to their Skilled Trades Centre of Excellence.

Read More

JMP Parent Company, CONVERGIX Acquires AGR Automation, Expanding Global Reach

Convergix Automation Solutions has completed the acquisition of AGR Automation (“AGR”), a UK-based provider of custom, high-performance automation design and systems integration primarily to the life sciences industry.

Following Convergix’s acquisitions of JMP Solutions in August 2021 and Classic Design in February 2022, AGR marks the third investment in Crestview’s strategy to build Convergix into a diversified automation solutions provider targeting the global $500+ billion market, with a particular focus on the $70 billion global systems integration and connectivity segments. Financial terms of the transaction were not disclosed.

Read More

Latest Articles

  • Implementing Functional Safety Requirements

    Implementing Functional Safety Requirements

    The Safety Functional Requirements Specification (SFRS; sometimes referred to as SRS or Safety Requirements Specification) is the plan for the safety controls on a machine and is the second step of the safety lifecycle. The SFRS document serves as a framework for the safety control system design, is informed by prior work done in the… Read More…

  • From Endress+Hauser, 24/7 Digital, Plant-Wide Health Monitoring for Rockwell Systems Optimizes Workflows and Processes

    From Endress+Hauser, 24/7 Digital, Plant-Wide Health Monitoring for Rockwell Systems Optimizes Workflows and Processes

    Endress+Hauser’s Asset Health Monitoring Solution–Rockwell Edition, now available for installation, provides operators with a centralized, digital overview of plant-wide device health to avoid unscheduled shutdowns and accelerate troubleshooting. It not only presents early visibility of problematic devices but distinguishes itself by adding likely causes and remedies to such a report so problems can be fixed… Read More…