October 24, 2024
Thanks to their high IP65/67 degree of protection they are especially rugged and can be installed without a cabinet. This makes them the ideal choice for distributed drive solutions and implementation in harsh industrial environments such as in conveyor technology.
Tscharner Technik (Tscharner) equips cable cars and ski lifts with control systems, combining their own software developed in-house with failsafe controllers from Siemens. As part of the software advancement, the visualization has been updated. The first project that uses the new solution includes two single ski lifts and one double ski lift in the Rosswald near Brig ski resort. The new control system impresses with its intuitive handling and clear display.
B&R’s Smart Camera and Smart Sensor are now available with a C mount. This greatly expands the range of possible applications for the vision system. Along with the new cameras, B&R is introducing five C-mount lenses that cover a wide range of focal lengths from 12 to 50 mm. The lenses are specially optimized for the image sensors used to achieve maximum resolution and high detail contrast.
Add or remove switchboard structures according to your construction needs, such as the main incoming with or without Canadian metering requirements, distribution loads, and submain sections.
Industrial automation customers can improve the data gathered from their machines with a new line of proximity sensors. The Allen-Bradley Bulletin 871FM miniature, metal, flat-pack, inductive proximity sensors from Rockwell Automation are rugged, smart sensors built for harsh environments.
HARTING ix Industrial IP20 PushPull Cables provide the miniaturization benefits of ix Industrial in a more efficient and comfortable design. The HARTING ix Industrial IP20 PushPull overmolded cable outlet offers improved bend protection and protection against higher tension on the cable. These cables feature Cat. 6A Class EA transmission up to 500MHz and a 10Mbit/s to 10Gbit/s data rate. These devices also include Type A (Ethernet) and Type B (signal) interfaces and operate over a -40°C to +85°C operating temperature range.
Two product versions have been added to Phoenix Contact’s portfolio of narrow surge protective devices for MCR technology with an overall width of just 6 mm. With TTC-6P-2×2 and TTC-6P-4×1, items are now available for protecting both analog and digital 4-conductor applications.
ABB has recently completed a previously announced 50/50 joint venture with Niedax Group. The Abnex Inc. joint venture (JV) will broaden solutions and advance opportunities in the rapidly growing North American cable management market. Integrating engineering and manufacturing capabilities of ABB’s Installation Products Division with Niedax Group will enable the newly formed company to deliver a broad… Read More…
Wesco International has recently announced the grand opening of a new state-of-the-art facility on Higney Avenue in Dartmouth, Nova Scotia, Canada, making this the largest facility of any distributor in the Atlantic region. The new building, facilitated by Touchette Real Estate, a division of Groupe Touchette, will feature Wesco’s comprehensive suite of services and solutions including… Read More…
The way to the Industrial IoT does not have to be complicated. Whether access to valuable data is required or new, data-driven services are to be generated, Weidmuller enables its customers to go from data to value the easy way. Weidmuller’s comprehensive and cutting-edge IIoT portfolio applies to greenfield and brownfield applications. Weidmuller offers components and solutions from data acquisition, data pre-processing, data communication and data analysis.
Visit Weidmuller’s Industrial IoT Portfolio.
Advanced Motion Controls is proud to announce the addition of six new CANopen servo drives with Extended Environment capabilities to their FlexPro line. These new drives join AMC’s existing EtherCAT Extended Environment FlexPro drives, making the FlexPro line the go-to solution for motion control applications in harsh environments.
Many motion control applications take place in conditions that are less than ideal, such as extreme temperatures, high and low pressures, shocks and vibrations, and contamination. Electronics, including servo drives, can malfunction or sustain permanent damage in these conditions.
Bruce Kesler and Mark Gatewood have been given new titles and responsibilities for Service Wire Co.
Bruce Kesler has assumed the role of Senior Director – Business Development. Bruce will be responsible for Service Wire’s largest strategic accounts and our growing Strategic Accounts Team.
Mark Gatewood has been promoted to the role of Vice President – Sales & Marketing. In this role, Gatewood will lead the efforts of Service Wire Company’s entire sales and marketing organization in all market verticals.
Recently, Tri-Mach Inc. was thrilled to announce the addition of a new 45,000 sq ft. facility. Located at 285 Union St., Elmira, ON, this facility expands Tri-Mach’s capabilities, allowing them to better serve the growing needs of their customers.
Positioning for growth, this additional facility will allow Tri-Mach to continue taking on large-scale projects, enhance product performance testing, and provide equipment storage for their customers. The building will also be the new home to their Skilled Trades Centre of Excellence.
Convergix Automation Solutions has completed the acquisition of AGR Automation (“AGR”), a UK-based provider of custom, high-performance automation design and systems integration primarily to the life sciences industry.
Following Convergix’s acquisitions of JMP Solutions in August 2021 and Classic Design in February 2022, AGR marks the third investment in Crestview’s strategy to build Convergix into a diversified automation solutions provider targeting the global $500+ billion market, with a particular focus on the $70 billion global systems integration and connectivity segments. Financial terms of the transaction were not disclosed.
The Safety Functional Requirements Specification (SFRS; sometimes referred to as SRS or Safety Requirements Specification) is the plan for the safety controls on a machine and is the second step of the safety lifecycle. The SFRS document serves as a framework for the safety control system design, is informed by prior work done in the… Read More…
Endress+Hauser’s Asset Health Monitoring Solution–Rockwell Edition, now available for installation, provides operators with a centralized, digital overview of plant-wide device health to avoid unscheduled shutdowns and accelerate troubleshooting. It not only presents early visibility of problematic devices but distinguishes itself by adding likely causes and remedies to such a report so problems can be fixed… Read More…
This project is funded [in part] by the Government of Canada.
Ce projet est financé [en partie] par le gouvernement du Canada.
