Mouser: Elecrow CrowPanel ESP32 Terminal RGB Display

November 26, 2024

Elecrow CrowPanel ESP32 Terminal RGB Display features an integrated ESP32-S3 module that supports Wi-Fi and Bluetooth 5. This display module adopts an Xtensa 32-bit LX7 dual-core processor with a main frequency of up to 240MHz. The CrowPanel ESP32 terminal has a 3.5-inch parallel RGB interface capacitive touch screen with a resolution of 480 x 320 to ensure perfect image output at 60fps. This display module offers four Crowtail interfaces that can be connected with Crowtail sensors, plug and play, and create interesting projects quickly and conveniently.

The CrowPanel ESP32 terminal RGB display also features an onboard charging circuit and lithium battery interface that uses a Type-C power supply interface to supply power and charge the battery at the same time. This display module supports ESP-IDF and Arduino IDE development and is compatible with Python/Micropython/Arduino.

The CrowPanel ESP32 terminal RGB display also supports the open-source Light and Versatile Embedded Graphics Library (LVGL) to create beautiful UIs for any MCU, MPU, and display type. Typical applications include industrial control, detection and processing of agricultural production environments, intelligent logistics monitoring, and smart home scenarios.

CrowPanel ESP32 Features

  • Integrated ESP32-S3 module:
    • Supports 2.4GHz Wi-Fi and Bluetooth 5 (LE)
  • LCD 3.5inches parallel TFT-LCD with 480 x 320 resolution
  • Compatible with Arduino/Python/MircoPython
  • Mature software support:
    • Support ESP-IDF and Arduino IDE development
  • Support open-source Graphics Library-LVGL
  • Support 1T1R mode, data rate up to 150Mbps, and Wireless Multimedia (WMM)
  • Plug and play with various Crowtail sensor
  • Perfect security mechanism:
    • Support AES-128/256, Hash, RSA, HMAC, digital signatures, and secure boot
  • On-board charging chip and interface:
    • Use Type-C interface to charge
  • With 4 Crowtail interfaces (HY2.0-4P connector):

Specifications

  • ESP32-S3WROOM-1-N16R8 module with 16MB Flash and 8MB PSRAM
  • 802.11b/g/n (802.11n up to 150Mbps) Wi-Fi protocol
  • 2.402GHz – 2.483Ghz Wi-Fi frequency range
  • Supports Bluetooth 5
  • On-board Micro TF card slot
  • ILI9488 (16-bit parallel line) driver chip
  • Capacitive touch panel controller IC FT6236 series
  • 5VDC operating voltage @ 500mA
  • -10°C to 65°C operating temperature range
  • 73.63mm(L) x 49.79mm(W) active area
  • 106mm(L) x 66mm(W) x 13mm(H) appearance dimensions

Applications

  • Industrial control
  • Agricultural production environment detection and processing
  • Intelligent logistics monitoring
  • Smart home scenarios

Platforms Supported

Elecrow CrowPanel ESP32 Terminal RGB Display

Source

Related Articles

PB-63-HMS-EwonCosyWireless-400.jpg

HMS Networks: Ewon Cosy+ Wireless – The New Standard for Wireless Remote Access to Industrial Machines

With the new Cosy+ Wireless, HMS Networks finalizes the release of the new generation of Ewon industrial remote access gateways, bringing IIoT connectivity and cybersecurity to the next level. Featuring built-in hardware security, the Cosy+ range allows users to access PLC-based machines securely from anywhere, and do commissioning, troubleshooting and programming online.

PB-50-Pepperl-R1000DistanceSensor-400.jpg

Pepperl+Fuchs: R1000 Distance Sensor with Pulse Ranging Technology for Positioning Accuracy Down to a Millimeter

Dynamic applications such as distance measurement and positioning in storage and retrieval machines or shuttle cars require a high measuring rate. The new R1000 distance sensor with Pulse Ranging Technology (PRT) is suitable for high-precision distance measurement.

 

 

 

End-of-Arm Tooling

AutomationDirect: Schmalz End-of-Arm Tooling Components

AutomationDirect now offers end-of-arm tooling components for robot arm vacuum pick-and-place applications. Components can be purchased individually or in kits that include everything needed to create a single-beam or dual-beam end-of-arm tool. Kits are simple, save time and money, and include structural rails (which support optional internal vacuum), connectors, cup mounts, vacuum tubing, vacuum cups, fittings, a basic ejector, a flange for Universal robot, and a blank robot flange.

PF ENI58pl 400

Pepperl+Fuchs Introduces the ENI58PL Configurable Incremental Rotary Encoder: One Encoder, Many Applications

The newly released ENI58PL series incremental rotary encoder from Pepperl+Fuchs offers incredible efficiency for a wide range of applications. IO-Link enables custom configuration, making it possible to commission machinery and equipment even faster. ENI58PL boasts flexible configuration options and a wide range of use cases-from classic industrial applications, such as precise positioning in the automotive industry and applications in wind power plants, to special engineering.

 

 

Hammond Power Solutions: Expanded Mini Power Center with 480V & 600V Primary Solutions

Hammond Power Solutions: Expanded Mini Power Center with 480V & 600V Primary Solutions

HPS is pleased to announce the expansion of our Mini Power Center, now featuring both 480V and 600V primary solutions. This expansion underscores our commitment to serving our customers needs and delivering versatile and efficient solutions. Modern electrical distribution systems need to be efficient in both space and cost. HPS mini power center addresses these needs with less space, and reduced installation time by up to 25% compared with a traditional three-part solution. This convenient pre-wired solution combines a primary and secondary main breaker, secondary power panel and a dry-type shielded transformer in a Type 3R enclosure.

Changing Scene

Sponsored Content
The Easy Way to the Industrial IoT

The way to the Industrial IoT does not have to be complicated. Whether access to valuable data is required or new, data-driven services are to be generated, Weidmuller enables its customers to go from data to value the easy way. Weidmuller’s comprehensive and cutting-edge IIoT portfolio applies to greenfield and brownfield applications. Weidmuller offers components and solutions from data acquisition, data pre-processing, data communication and data analysis.

Visit Weidmuller’s Industrial IoT Portfolio.

ADVANCED Motion Controls Takes Servo Drives to New Heights (and Depths) with FlexPro Extended Environment Product Line

Advanced Motion Controls is proud to announce the addition of six new CANopen servo drives with Extended Environment capabilities to their FlexPro line. These new drives join AMC’s existing EtherCAT Extended Environment FlexPro drives, making the FlexPro line the go-to solution for motion control applications in harsh environments.

Many motion control applications take place in conditions that are less than ideal, such as extreme temperatures, high and low pressures, shocks and vibrations, and contamination. Electronics, including servo drives, can malfunction or sustain permanent damage in these conditions.

Read More

Service Wire Co. Announces New Titles for Key Executives

Bruce Kesler and Mark Gatewood have been given new titles and responsibilities for Service Wire Co.

Bruce Kesler has assumed the role of Senior Director – Business Development. Bruce will be responsible for Service Wire’s largest strategic accounts and our growing Strategic Accounts Team.

Mark Gatewood has been promoted to the role of Vice President – Sales & Marketing. In this role, Gatewood will lead the efforts of Service Wire Company’s entire sales and marketing organization in all market verticals.

Read More

Tri-Mach Announces the Purchase of an Additional 45,000 sq ft. Facility

Tri-Mach Elmira Facility

Recently, Tri-Mach Inc. was thrilled to announce the addition of a new 45,000 sq ft. facility. Located at 285 Union St., Elmira, ON, this facility expands Tri-Mach’s capabilities, allowing them to better serve the growing needs of their customers.

Positioning for growth, this additional facility will allow Tri-Mach to continue taking on large-scale projects, enhance product performance testing, and provide equipment storage for their customers. The building will also be the new home to their Skilled Trades Centre of Excellence.

Read More

JMP Parent Company, CONVERGIX Acquires AGR Automation, Expanding Global Reach

Convergix Automation Solutions has completed the acquisition of AGR Automation (“AGR”), a UK-based provider of custom, high-performance automation design and systems integration primarily to the life sciences industry.

Following Convergix’s acquisitions of JMP Solutions in August 2021 and Classic Design in February 2022, AGR marks the third investment in Crestview’s strategy to build Convergix into a diversified automation solutions provider targeting the global $500+ billion market, with a particular focus on the $70 billion global systems integration and connectivity segments. Financial terms of the transaction were not disclosed.

Read More

Latest Articles

  • Automated Test Equipment (ATE) Revival: Repurposing and Extending the Life of Aging ATE Systems

    Automated Test Equipment (ATE) Revival: Repurposing and Extending the Life of Aging ATE Systems

    Automated Test Equipment (ATE) and Automated Test Systems (ATS) serve the critical purpose of ensuring that electronic devices operate according to specifications in the field. As such, these systems are widely utilized for testing automotive electronics, batteries, telecom infrastructure, renewable energy systems, and consumer electronics. The aerospace and defense sectors also make substantial investments in… Read More…

  • Partner Country Canada at HANNOVER MESSE 2025: The Future’s Here

    Partner Country Canada at HANNOVER MESSE 2025: The Future’s Here

    Canada is Partner Country of HANNOVER MESSE 2025, underscoring the strong economic and political ties between “The True North” and Germany. Canada announced its Partner Country commitment in August 2022 when Canadian Prime Minister Justin Trudeau hosted German Chancellor Olaf Scholz in Canada. Canada’s starring role from 31 March to 4 April 2025 at HANNOVER… Read More…