Panel Builder System Integrator

Safedoor SD100August 23, 2021

Odense, Denmark, August 23, 2021: Currently only a small percentage of the industry's CNC machines are automatically fed components. Most of the world's CNC machines rely on either the operator or the robotic arm having to physically open and close the machines' heavy doors every few minutes. Investing in a new fully automatic CNC machine or upgrading an older model can be a tall order, both in practical and financial terms.

Made4CNC's first official product, the new Safedoor SD100 removes the barriers to the automation of component feeding at machine shops. Safedoor SD100 opens CNC doors that are up to 1 meter wide and weigh 400 kg, at a speed of 500 mm/s. The door opener can connect to any robot and CNC machine make via galvanic insulated digital inputs and outputs.

Several end users and distributors have already caught the scent of a killer app and have started deploying the solution. The team behind Made4CNC, Thomas Visti, Lasse Kieffer and Peter Nadolny are three professionals well-known for disrupting the robot industry, having played integral roles in the success of Danish robot companies Universal Robots, OnRobot, Purple Robotics and Mobile Industrial Robots.

Made4CNC TeamAutomation must speed up

When automating CNC machines today, integrators often build "homemade" door opening solutions. But that risks errors, stoppages, and hazardous situations because the solutions typically require compressed air and are neither standardized nor tested. These challenges are overcome with Made4CNC's fully electric Safedoor SD100 with built-in safety functions that enable the integrator to adjust the speed of the CNC door, making risk assessments easier to conduct.

"Around the world the need for faster and greater automation is a major trend, and for it to succeed, less time must be spent on each installation," said Peter Nadolny Madsen, CEO at Made4CNC. "With the SD100, we have integrated safety and robustness in a user-friendly solution, which we believe is the key to optimal productivity," he said, adding that integration of collaborative robots or light industrial robots together with existing CNC machines makes a lot of sense, since the automation of existing machines generate low risk and a short payback period for the customer.

Global expansion in 12 months

Together with investors Thomas Visti and Lasse Kieffer, Peter Nadolny Madsen established Made4CNC in January 2021. Investor Lasse Kieffer has contributed with his deep technological expertise, while investor Thomas Visti has provided market insight: "Made4CNC has understood what is required to make the process easier," said Thomas Visti "It's win-win-win for the end customer, employees, distributors and the manufacturer. I therefore expect that Made4CNC will have established itself via robot distributors and integrators around most of the world in the next 12 months."

Safedoor SD100Stable, safe door openers

Integrator Nordelektro has installed two Made4CNC Safedoor SD100 door opening solutions at Randers Tandhjulsfabrik. "It took less than an hour for each CNC machine and they are good and stable door openers," reported Lars Bo Nielsen, factory manager at Randers Tandhjulsfabrik. For Nordelektro, it makes a huge difference that they can provide customers with a standardized solution designed as a solution-in-a-box:
"Safedoor SD100 is a complete solution, which makes it simpler to work with automation," said Jesper Storm Simonsen, sales manager at Nordelektro. "It is a huge advantage for us as an integrator. We don't need to invent something complicated and expensive. We have minimum project risk."

Better flow and better work environment

Made4CNC has just entered into agreement with their first American distributor, Thinkbot Solutions: "Safedoor SD100 makes having a job as a machine feeder much more pleasant and easy-going, while the employer will be able to optimize and get a better work flow," said President of Thinkbot Solutions, Philip Courtois. "Others have tried unsuccessfully to develop a user-friendly door opener. Made4CNC has completely succeeded. I have chosen to distribute SD100 because attention is given to all of the details in terms of the mechanics, software and safety," he stated, adding that SD100 is certified by the world's most popular collaborative robot company Universal Robots (UR). "The UR+ certification ensures completely seamless integration with robots from Universal Robots. All operation can be done through the robot's teach pendant."

About Made4CNC

Made4CNC ApS was founded in January 2021 by CEO Peter Nadolny Madsen with investors Thomas Visti and Lasse Kieffer. The trio played a central role in the global success of well-known Danish robot companies including Universal Robots, OnRobot, Purple Robotics and Mobile Industrial Robots. The company is based at Visti Unlimited, an entrepreneurial coworking space, located in Odense, the "robot capital" of Europe.

http://www.made4cnc.com/ 

Latest Articles

  • Prev
Support is something that all businesses have needed over the last couple years, whether that is ...
Siemens Smart Infrastructure has recently completed the acquisition of French startup Wattsense, a ...
Many companies struggle with the fact that they need a major technological upgrade to expand their ...
  Bosch Rexroth, EPLAN, Festo, Murrelektronik, PILZ, Rittal and WAGO, seven prominent ...
It’s finally here – the new EPLAN Platform 2022. And with it, solutions provider EPLAN is heralding ...
54 plants are to be modernised, to upgrade Vaillant’s production of hot water storage cylinders to ...
The current supply situation of steel, chips and plastics has become tighter worldwide. ...
Situation: Worker approaches the enclosure and the disconnect switch for the 480V power source is ...
“Dirty Power” means an unclean supply system. This does not concern the means (environmental ...
Beckhoff Canada opened its Western Region Sales and Training Centre in the well-known Metrotower ...

Beckhoff Canada Opens Office in Greater Vancouver

Beckhoff CanadaCAMBRIDGE, Ontario, Aug. 24, 2021 – Beckhoff Canada opened a Western Region Sales and Training Centre in the technology-rich Vancouver area to increase sales development and market share growth. The 2,950-square-foot office is in Tower 1 of the prominent Metrotower Office Complex in downtown Burnaby, British Columbia.

The facility offers increased space for sales and engineering support, training and seminars, as well as an intelligent motion lab where Beckhoff product experts can test Flying Motion capabilities and machine concepts using the XPlanar system.

 

Read More


 


AutomationDirect Releases New Contrinex M18 Short-Body Photoelectric Sensors and Sensor Tester

AutomationDirect Contrinex M18 Short-BodyPhotoelectric SensorsAutomationDirect has added a new series of Contrinex M18 photoelectric sensors to their ever-growing selection of discrete sensors, as well as a new sensor tester used with various sensor types to verify operation in the field.

The Contrinex M18 sensors are made in the USA and have a short body for easy installation in even the tightest locations. These sensors are available in diffuse, diffuse with adjustable background suppression, retroreflective, and through-beam models, and with NPN and PNP logic. All PNP models are IO-Link® compatible, and all sensor outputs are complementary, allowing them to be used as a light-on or dark-on sensor.

Read More


 

WESCO Canada Designated a Bosch Certified Excellence Partner

PB-49-Wesco-logo-400.jpg

WESCO Distribution Canada LP recently announced that it has earned the Bosch Certified Excellence Partner designation. The Certified Excellence (CE) designation is an international program in the Partner Management of Bosch Rexroth, one of WESCO Canadas’s largest suppliers of automation and control products. Certified partners must provide the best and most reliable service to customers and are seen as an integral part of “ONE Rexroth Sales” worldwide.

WESCO will leverage its Certified Excellence designation to maximize the use of Bosch technologies to efficiently support customer operations wherever they are located.

Michael Gross, Vice President & General Manager of WESCO Canada stated, “With Bosch as a partner we are giving our customers and users a competitive advantage through safe, efficient, intelligent and high-performance solutions."

Read More

Product News

  • Prev
With system survivability being a key concern to regulators, building managers, and the public, ...
Phoenix Contact is extending its range of reflow-solder-capable PCB terminal blocks (MSL1) to ...
Sealcon’s A2F cable gland features an innovative design that saves space with its smaller ...
AutomationDirect has added more enclosures from Saginaw Control & Engineering, a leading ...
Widespread labor shortages and phenomenal growth in the online retail sector places enormous ...
The new safety card PMCprotego S3 expands the drive-integrated safe motion solution PMCprotego DS, ...
FANUC America, a leading supplier of CNCs, robotics and ROBOMACHINES, introduces an upgrade ...
The Type 3 safety light curtains PSENopt II from Pilz are the world’s first light curtain with ...
To maintain the highest level of customer satisfaction Pilz is getting very creative. The current ...
The powerful edge device integrates space-saving, fanless machine control directly into harsh ...

Mitsubishi Electric Releases CNC Offset Manager Software

PBUS-31-Mitsubishi-CNCOffsetManagerSoftware-400.jpg

Mitsubishi Electric is announcing the release of its CNC Offset Manager software for remote modification of computerized numerical control (CNC) tool and work offsets. With the push towards automation and central control, machining facilities are searching for more efficient ways to manage their CNC machines. The software can introduce increased efficiency in multiple ways: for instance, it allows one operator to manage more machines, speeding up machine setup and tool wear changes, or adjusts for parts out of tolerance, as well as centralizing this work so operators don’t need to move between machines or into robot cells. CNC Offset Manager is thus geared towards production managers and supervisors on factory floors across various industries, as well as towards CNC automation software companies.

Read More


 

Kerrwil Publications Great Place to Work. Certified December 2019 - December 2020

538 Elizabeth Street, Midland,Ontario, Canada L4R2A3 +1 705 527 7666
©2021 All rights reserved

Use of this Site constitutes acceptance of our Privacy Policy (effective 1.1.2016)
The material on this site may not be reproduced, distributed, transmitted, cached or otherwise used, except with the prior written permission of Kerrwil