General Motors Proposes Renewable Energy Project at St. Catharines Propulsion Plant

GM

December 11, 2017

General Motors of Canada is proposing to build a 6.4 megawatt co-generation plant that will use renewable landfill gas as fuel to generate electricity and recover thermal energy to power and heat its St. Catharines Propulsion Plant. 

This project is a partnership with Alectra Utilities, Integrated Gas Recovery Services and the TargetGHG program funded by the Ministry of Research, Innovation and Science which is administered by Ontario Centres of Excellence (OCE). 

“Supporting the efforts of large industries in their quest to reduce their greenhouse gas emissions is an important part of our government’s Climate Change Action Plan,” says Reza Moridi, Minister of Research, Innovation and Science. “With the help of our province’s innovative cleantech companies, the TargetGHG program will help build a prosperous, low carbon economy and create a cleaner, more sustainable future for Ontario.”

The proposed project will reduce net greenhouse gas emissions by an estimated 77 per cent and lower energy electrical costs, improving the facility’s long-term competitiveness.

Once online in mid-2019, clean energy will power approximately 32 per cent of the St. Catharines’ plant – the most of any of GM’s global population operations worldwide.

“With the support of OCE, Alectra Utilities, and IGRS, this proposed co-generation project will enable GM Canada and our partners to reduce net greenhouse gas emissions from our St Catharines operations while significantly lowering our plant energy operating costs,” said David Paterson, Vice President of Corporate and Environmental Affairs, GM.

The project will serve as Ontario’s first complete renewable landfill gas industrial co-generation system that delivers renewable landfill gas from an offsite source and distributes it via a dedicated pipeline to a co-generation plant located at a large industrial facility.

General Motors’ renewable energy use spans decades. The company is a founding member of the Renewable Thermal Collaborative – an initiative of the Renewable Energy Buyers Alliance – to share best practices and increase awareness of renewable thermal technologies. GM committed to power all of its global operations’ electricity with 100 percent renewable energy by 2050. Greater use of thermal energy helps address heating and cooling needs to further reduce emissions.

For more information on GM’s environmental commitment, visit its sustainability report and environmental blog.

Related Articles


Changing Scene

  • Spartan Controls Partners with Northwestern Polytechnic to Empower the Next Generation of Engineers

    Spartan Controls Partners with Northwestern Polytechnic to Empower the Next Generation of Engineers

    Spartan Controls is proud to announce a 15-year partnership with Northwestern Polytechnic (NWP) as the exclusive naming sponsor for the institution’s new $16 million, full-service training and education space. The facility, set to open in summer 2025, will be named the Spartan Controls Northwestern Centre for Industrial Automation & Innovation. Read More…

  • Convergix: Tarriff Communication

    Convergix: Tarriff Communication

    Convergix Announces Tarriff Mitigation Plan. With the recent news regarding tariffs affecting trade between Mexico, Canada, China, and the U.S., and the indication of tariffs being imposed on the U.S. by Canada and Mexico, we want to take a moment to share the steps Convergix is taking to minimize any potential impact on our customers.… Read More…


Sponsored Content
The Easy Way to the Industrial IoT

The way to the Industrial IoT does not have to be complicated. Whether access to valuable data is required or new, data-driven services are to be generated, Weidmuller enables its customers to go from data to value the easy way. Weidmuller’s comprehensive and cutting-edge IIoT portfolio applies to greenfield and brownfield applications. Weidmuller offers components and solutions from data acquisition, data pre-processing, data communication and data analysis.

Visit Weidmuller’s Industrial IoT Portfolio.


ADVANCED Motion Controls Takes Servo Drives to New Heights (and Depths) with FlexPro Extended Environment Product Line

Advanced Motion Controls is proud to announce the addition of six new CANopen servo drives with Extended Environment capabilities to their FlexPro line. These new drives join AMC’s existing EtherCAT Extended Environment FlexPro drives, making the FlexPro line the go-to solution for motion control applications in harsh environments.

Many motion control applications take place in conditions that are less than ideal, such as extreme temperatures, high and low pressures, shocks and vibrations, and contamination. Electronics, including servo drives, can malfunction or sustain permanent damage in these conditions.

Read More


Service Wire Co. Announces New Titles for Key Executives

Bruce Kesler and Mark Gatewood have been given new titles and responsibilities for Service Wire Co.

Bruce Kesler has assumed the role of Senior Director – Business Development. Bruce will be responsible for Service Wire’s largest strategic accounts and our growing Strategic Accounts Team.

Mark Gatewood has been promoted to the role of Vice President – Sales & Marketing. In this role, Gatewood will lead the efforts of Service Wire Company’s entire sales and marketing organization in all market verticals.

Read More


Tri-Mach Announces the Purchase of an Additional 45,000 sq ft. Facility

Tri-Mach Elmira Facility

Recently, Tri-Mach Inc. was thrilled to announce the addition of a new 45,000 sq ft. facility. Located at 285 Union St., Elmira, ON, this facility expands Tri-Mach’s capabilities, allowing them to better serve the growing needs of their customers.

Positioning for growth, this additional facility will allow Tri-Mach to continue taking on large-scale projects, enhance product performance testing, and provide equipment storage for their customers. The building will also be the new home to their Skilled Trades Centre of Excellence.

Read More


JMP Parent Company, CONVERGIX Acquires AGR Automation, Expanding Global Reach

Convergix Automation Solutions has completed the acquisition of AGR Automation (“AGR”), a UK-based provider of custom, high-performance automation design and systems integration primarily to the life sciences industry.

Following Convergix’s acquisitions of JMP Solutions in August 2021 and Classic Design in February 2022, AGR marks the third investment in Crestview’s strategy to build Convergix into a diversified automation solutions provider targeting the global $500+ billion market, with a particular focus on the $70 billion global systems integration and connectivity segments. Financial terms of the transaction were not disclosed.

Read More


Latest Articles

  • HELUKABEL: Q & A With HELU – Cable Solutions for Glass Manufacturing

    HELUKABEL: Q & A With HELU – Cable Solutions for Glass Manufacturing

    HELUKABEL Provides Insights Regarding Cable Solutions in Glass Manufacturing. In the glass manufacturing industry, various types of cables play essential roles in powering equipment, monitoring temperatures, and ensuring safe, efficient operations. Due to the high temperatures, heavy machinery, and automation involved in glass production, specialized cables are required to withstand extreme conditions, transmit data reliably,… Read More…

  • Wieland: TÜV-Certified Training for Functional Safety February 24 – 28, 2025 in Mississauga

    Wieland: TÜV-Certified Training for Functional Safety February 24 – 28, 2025 in Mississauga

    Wieland: TÜV-Certified Training for Functional Safety February 24 – 28, 2025 in Mississauga. This intensive five-day course is designed for designers, developers, maintenance engineers, and safety officers seeking to enhance their expertise in functional safety. Participants will gain in-depth knowledge and practical skills to implement functional safety measures throughout the entire CE process in compliance… Read More…