Rockwell Automation Supports the Energy Observer Project

Rockwell Automation

 

September 20, 2018

The world’s first vessel powered by hydrogen and renewable energy, the Energy Observer, is on a six-year trip around the world to prove a potential energy system of the future. Rockwell Automation has become an official supplier and service provider for this project, providing automation systems that help power the vessel, which operates with zero greenhouse gasses or fine-particle emissions.

To help ensure 24-hour energy autonomy throughout its global expedition, the Energy Observer uses a combination of intermittent renewable energy: solar panels, wind turbines, lithium-ion batteries and a hydrogen production system.

The Energy Observer team turned to Rockwell Automation for advanced automation technology to help control the vessel’s energy management system. The solution consists of an Allen-Bradley ControlLogix programmable automation controller, Allen-Bradley PowerFlex drives, Allen-Bradley POINT I/O, FactoryTalk View Site Edition (SE) supervision software and FactoryTalk Historian data-capture software, all of which integrate seamlessly to monitor and control the system. A central human machine interface (HMI) completes the solution, delivering real-time information to the crew.

The energy management solution helps the Energy Observer team monitor, control and optimize the distribution of energy sources and make smart decisions about when and how to switch from one energy source to another. It also records the vessel’s operational data throughout its journey and communicates it back to the rest of the team on shore.

One example of this is the lithium-ion battery power being used to drive on-board systems like propulsion and desalination. Solar panels and wind turbines charge the batteries using PowerFlex drives. Should unfavorable environmental conditions cause the battery level to reach 30 percent or lower, the vessel’s hydrogen power source – fed from hydrogen created during the ocean water desalination process – activates to supply additional charging capabilities.

Representatives from the Energy Observer project were present in the Rockwell Automation booth at the recent Movin’ON World Summit on Sustainable Mobility presented by Michelin, held in Montreal in late May.

For more information Rockwell Automation Inc.

 

 

Related Articles

AD Electrical – Canada Continues to Gain New Membership Acquisitions
|

AD Electrical – Canada Continues to Gain New Membership Acquisitions

August 27, 2024 AD Electrical – Canada has been on a roll since the month of July 2024, in terms of new member acquisitions for its #ADSTRONG distributor base. In this brief article, you will find a list of AD Electrical – Canada’s newest members to the AD family, as well as the announcement of each acquisition…

PB 25 Rockwell newlogo 400

Cut Startup Costs and Inefficiencies with the Right MAC

You’ve been through it before. Just days away from a scheduled plant or platform launch and you’re scrambling to connect OEM skids and at risk of missing your launch deadline. Almost every oil and gas company has experienced the chaos that comes with trying to finish a start-up in its final days. The good news – this doesn’t have to be your status quo.

 

 

 

Changing Scene

Sponsored Content
The Easy Way to the Industrial IoT

The way to the Industrial IoT does not have to be complicated. Whether access to valuable data is required or new, data-driven services are to be generated, Weidmuller enables its customers to go from data to value the easy way. Weidmuller’s comprehensive and cutting-edge IIoT portfolio applies to greenfield and brownfield applications. Weidmuller offers components and solutions from data acquisition, data pre-processing, data communication and data analysis.

Visit Weidmuller’s Industrial IoT Portfolio.

ADVANCED Motion Controls Takes Servo Drives to New Heights (and Depths) with FlexPro Extended Environment Product Line

Advanced Motion Controls is proud to announce the addition of six new CANopen servo drives with Extended Environment capabilities to their FlexPro line. These new drives join AMC’s existing EtherCAT Extended Environment FlexPro drives, making the FlexPro line the go-to solution for motion control applications in harsh environments.

Many motion control applications take place in conditions that are less than ideal, such as extreme temperatures, high and low pressures, shocks and vibrations, and contamination. Electronics, including servo drives, can malfunction or sustain permanent damage in these conditions.

Read More

Service Wire Co. Announces New Titles for Key Executives

Bruce Kesler and Mark Gatewood have been given new titles and responsibilities for Service Wire Co.

Bruce Kesler has assumed the role of Senior Director – Business Development. Bruce will be responsible for Service Wire’s largest strategic accounts and our growing Strategic Accounts Team.

Mark Gatewood has been promoted to the role of Vice President – Sales & Marketing. In this role, Gatewood will lead the efforts of Service Wire Company’s entire sales and marketing organization in all market verticals.

Read More

Tri-Mach Announces the Purchase of an Additional 45,000 sq ft. Facility

Tri-Mach Elmira Facility

Recently, Tri-Mach Inc. was thrilled to announce the addition of a new 45,000 sq ft. facility. Located at 285 Union St., Elmira, ON, this facility expands Tri-Mach’s capabilities, allowing them to better serve the growing needs of their customers.

Positioning for growth, this additional facility will allow Tri-Mach to continue taking on large-scale projects, enhance product performance testing, and provide equipment storage for their customers. The building will also be the new home to their Skilled Trades Centre of Excellence.

Read More

JMP Parent Company, CONVERGIX Acquires AGR Automation, Expanding Global Reach

Convergix Automation Solutions has completed the acquisition of AGR Automation (“AGR”), a UK-based provider of custom, high-performance automation design and systems integration primarily to the life sciences industry.

Following Convergix’s acquisitions of JMP Solutions in August 2021 and Classic Design in February 2022, AGR marks the third investment in Crestview’s strategy to build Convergix into a diversified automation solutions provider targeting the global $500+ billion market, with a particular focus on the $70 billion global systems integration and connectivity segments. Financial terms of the transaction were not disclosed.

Read More

Latest Articles

  • Implementing Functional Safety Requirements

    Implementing Functional Safety Requirements

    The Safety Functional Requirements Specification (SFRS; sometimes referred to as SRS or Safety Requirements Specification) is the plan for the safety controls on a machine and is the second step of the safety lifecycle. The SFRS document serves as a framework for the safety control system design, is informed by prior work done in the… Read More…

  • From Endress+Hauser, 24/7 Digital, Plant-Wide Health Monitoring for Rockwell Systems Optimizes Workflows and Processes

    From Endress+Hauser, 24/7 Digital, Plant-Wide Health Monitoring for Rockwell Systems Optimizes Workflows and Processes

    Endress+Hauser’s Asset Health Monitoring Solution–Rockwell Edition, now available for installation, provides operators with a centralized, digital overview of plant-wide device health to avoid unscheduled shutdowns and accelerate troubleshooting. It not only presents early visibility of problematic devices but distinguishes itself by adding likely causes and remedies to such a report so problems can be fixed… Read More…