Centre for Healthcare Engineering Celebrates 10 Years of Innovation

University of Toronto

 

October 5, 2018

High atop the Myhal Centre for Engineering Innovation & Entrepreneurship, a group of 100 engineering graduate students, faculty members, research scientists, and alumni gathered on October 1 to mark a decade of progress toward the goal of smarter health-care delivery.

The expansive terrace on the Dr. Woo Hon Fai Innovation Floor provided attendees with a breathtaking night view of the city’s Discovery District—a cluster of hospitals, research centres, and U of T—that makes Toronto one of the best places in the world to study health-care engineering.

Established in 2008 to bridge academic research with practice, U of T Engineering’s Centre for Healthcare Engineering (CHE) has pioneered data-driven research to improve efficiency and enhance patient care.

At the celebration, current students working with CHE showcased their latest research, while alumni discussed the state of their fields with faculty members. Many old friends reconnected over memories rekindled by the event.

Professor Timothy Chan (MIE), director of the CHE, said the event felt more like a family reunion than a typical wine-and-cheese affair.

“You really felt a strong sense of camaraderie,” he said. “It was great to see old students reconnecting, and new connections forming between current students, alumni, and faculty. While health care engineering as a field has grown quickly, especially over the past 10 years since CHE began, it’s still a tight-knit community.”

After an introduction by Chan, Professor Michael Carter (MIE), CHE’s first director and a newly appointed Fellow of the Canadian Academy of Health Sciences, addressed the gathered crowd—a third of whom were his former students or associates.

 

 

 

 

 

 

 

 

 

 

 

Prof. Michael Carter (MIE) stands with current students of CHE.

 

“Tim’s introduction sounded like a retirement speech,” he said. “I have no intention of retiring yet! There is still a lot of work to do, and I believe I can still make a contribution.”

“It’s an honour to be surrounded by friends and close colleagues,” Carter added. “I loved talking to everyone, to hear what projects they’re working on, what challenges they hope to tackle. That CHE can serve as a platform to get their ideas out in the world is immensely important.”

The keynote address was given by Dr. David Jaffray, Executive VP of Technology and Innovation at University Health Network, and was focused on the role engineers play in steering society towards progress.

“When Captain Kirk needs help, he says, ‘Get me engineering!’” said Jaffray. He went on to explain that a hospital, like a spaceship, is a system, not a large inert object. Systems can be studied and improved, and that is exactly what associates of CHE are doing.

 

 

 

 

 

 

 

 

 

 

Dr. David Jaffray, Executive VP of Technology and Innovation at UHN, discusses importance of CHE’s work.

 

Despite big data and efficiency being a strong focus of CHE, a concern for people’s well-being remains at the heart of health care engineering.

“None of us would be working in health care engineering if we didn’t care about making things better for patients, doctors, and the whole health-care system,” said Chan. “Engineers bring a unique set of skills and perspectives to tackling health-care issues. These past 10 years are just the beginning. CHE is going to keep pushing forward with research that will save lives, reduce costs, and improve efficiency.”

For more information https://www.utoronto.ca/

 

*Photo 1 Caption : Professor Timothy Chan (MIE), director of the Centre for Healthcare Engineering (CHE), speaking to more than 100 graduate students, faculty members, researchers and alumni gathered to celebrate 10 years of CHE.

 

 

Related Articles


Changing Scene


Sponsored Content
The Easy Way to the Industrial IoT

The way to the Industrial IoT does not have to be complicated. Whether access to valuable data is required or new, data-driven services are to be generated, Weidmuller enables its customers to go from data to value the easy way. Weidmuller’s comprehensive and cutting-edge IIoT portfolio applies to greenfield and brownfield applications. Weidmuller offers components and solutions from data acquisition, data pre-processing, data communication and data analysis.

Visit Weidmuller’s Industrial IoT Portfolio.


ADVANCED Motion Controls Takes Servo Drives to New Heights (and Depths) with FlexPro Extended Environment Product Line

Advanced Motion Controls is proud to announce the addition of six new CANopen servo drives with Extended Environment capabilities to their FlexPro line. These new drives join AMC’s existing EtherCAT Extended Environment FlexPro drives, making the FlexPro line the go-to solution for motion control applications in harsh environments.

Many motion control applications take place in conditions that are less than ideal, such as extreme temperatures, high and low pressures, shocks and vibrations, and contamination. Electronics, including servo drives, can malfunction or sustain permanent damage in these conditions.

Read More


Service Wire Co. Announces New Titles for Key Executives

Bruce Kesler and Mark Gatewood have been given new titles and responsibilities for Service Wire Co.

Bruce Kesler has assumed the role of Senior Director – Business Development. Bruce will be responsible for Service Wire’s largest strategic accounts and our growing Strategic Accounts Team.

Mark Gatewood has been promoted to the role of Vice President – Sales & Marketing. In this role, Gatewood will lead the efforts of Service Wire Company’s entire sales and marketing organization in all market verticals.

Read More


Tri-Mach Announces the Purchase of an Additional 45,000 sq ft. Facility

Tri-Mach Elmira Facility

Recently, Tri-Mach Inc. was thrilled to announce the addition of a new 45,000 sq ft. facility. Located at 285 Union St., Elmira, ON, this facility expands Tri-Mach’s capabilities, allowing them to better serve the growing needs of their customers.

Positioning for growth, this additional facility will allow Tri-Mach to continue taking on large-scale projects, enhance product performance testing, and provide equipment storage for their customers. The building will also be the new home to their Skilled Trades Centre of Excellence.

Read More


JMP Parent Company, CONVERGIX Acquires AGR Automation, Expanding Global Reach

Convergix Automation Solutions has completed the acquisition of AGR Automation (“AGR”), a UK-based provider of custom, high-performance automation design and systems integration primarily to the life sciences industry.

Following Convergix’s acquisitions of JMP Solutions in August 2021 and Classic Design in February 2022, AGR marks the third investment in Crestview’s strategy to build Convergix into a diversified automation solutions provider targeting the global $500+ billion market, with a particular focus on the $70 billion global systems integration and connectivity segments. Financial terms of the transaction were not disclosed.

Read More


Latest Articles

  • Automated Test Equipment (ATE) Revival: Repurposing and Extending the Life of Aging ATE Systems

    Automated Test Equipment (ATE) Revival: Repurposing and Extending the Life of Aging ATE Systems

    Automated Test Equipment (ATE) and Automated Test Systems (ATS) serve the critical purpose of ensuring that electronic devices operate according to specifications in the field. As such, these systems are widely utilized for testing automotive electronics, batteries, telecom infrastructure, renewable energy systems, and consumer electronics. The aerospace and defense sectors also make substantial investments in… Read More…

  • Partner Country Canada at HANNOVER MESSE 2025: The Future’s Here

    Partner Country Canada at HANNOVER MESSE 2025: The Future’s Here

    Canada is Partner Country of HANNOVER MESSE 2025, underscoring the strong economic and political ties between “The True North” and Germany. Canada announced its Partner Country commitment in August 2022 when Canadian Prime Minister Justin Trudeau hosted German Chancellor Olaf Scholz in Canada. Canada’s starring role from 31 March to 4 April 2025 at HANNOVER… Read More…