Emerson and Vayu Form Alliance to Optimize Wind Energy Farms with Machine Learning

June 10, 2019

Emerson has formed an alliance with Vayu, a Ystrategies Corp. company, to provide automation technology solutions for wind farm energy optimization in the Americas, Caribbean and Europe. The three-year collaboration combines the advanced power applications and networking capabilities of Emerson’s Ovation automation platform with Vayu’s cloud-computing wind energy optimization technology. Using this approach, Vayu has identified more than $500 million in revenue opportunities from just a fraction of the approximately 450 wind farms in the United States.

“Combining the respective strengths of Emerson and Vayu creates a first-of-its-kind, intelligent solution for wind farm optimization,” said Bob Yeager, president of Emerson’s power and water business. “This initiative will help wind energy producers maximize their aggregate power output, achieve their financial objectives and deliver more clean power to their communities.” 

The wind power market continues to grow: 53.9 gigawatts were added in 2018, bringing the overall capacity of all wind turbines installed worldwide to 600 gigawatts, according to the World Wind Energy Association. The United States—the second-largest wind power market—added 7.6 gigawatts of capacity last year. 

Beyond the additional revenue from megawatt production, the advanced solution from Vayu and Emerson can also help U.S. wind farm owners take advantage of federal production tax credits awarded for increasing electricity output of existing wind turbines. 

“Instead of embarking on full-scale repowering projects that can cost millions, wind farm owners can make a small investment in this integrated solution to boost power production and qualify for the tax credit,” said Vayu CEO Jim Kiles. 

In traditional wind farms, each turbine is individually optimized. Each creates its own turbulence, or wake, which prevents downwind turbines from receiving full energy from the wind stream, significantly reducing wind energy production. Vayu estimates two-thirds of U.S. wind farms experience reduced capacity due to wind wake. Emerson and Vayu’s solution leverages key data and machine learning to enable turbines to work cooperatively, adjusting the side-to-side movement of each turbine based on wind speed, wind direction and other parameters to extract the optimum energy from wind. 

Emerson’s Ovation compact controller will communicate data from each turbine’s wind sensor to the Vayu system every 1-2 seconds—much faster than the 10 minutes typically required to perform this function when using traditional equipment. This near-real-time data enables a more accurate calculation of the optimum setting for each turbine. 

Ovation compact control technology was designed specifically for renewables and other highly distributed energy applications and can easily interface with any turbine controller—regardless of manufacturer—eliminating the significant time and expense associated with removing and replacing existing turbine controls.

For more information, visit HERE.

Related Articles


Changing Scene

  • Wesco Opens State-of-the-Art Facility in Eastern Canada to Support Influx of Megaprojects in the Region

    Wesco Opens State-of-the-Art Facility in Eastern Canada to Support Influx of Megaprojects in the Region

    Wesco International has recently announced the grand opening of a new state-of-the-art facility on Higney Avenue in Dartmouth, Nova Scotia, Canada, making this the largest facility of any distributor in the Atlantic region. The new building, facilitated by Touchette Real Estate, a division of Groupe Touchette, will feature Wesco’s comprehensive suite of services and solutions including… Read More…

  • PataBid Nominated for Canadian Choice Award in Software Services

    PataBid Nominated for Canadian Choice Award in Software Services

    PataBid is proud to announce its nomination for a Canadian Choice Award in the Software Services category. This recognition highlights PataBid’s commitment to supporting the electrical contracting community across Canada by providing innovative estimating software solutions that streamline estimating processes and ensure predictable and profitable projects. Read More…


Sponsored Content
The Easy Way to the Industrial IoT

The way to the Industrial IoT does not have to be complicated. Whether access to valuable data is required or new, data-driven services are to be generated, Weidmuller enables its customers to go from data to value the easy way. Weidmuller’s comprehensive and cutting-edge IIoT portfolio applies to greenfield and brownfield applications. Weidmuller offers components and solutions from data acquisition, data pre-processing, data communication and data analysis.

Visit Weidmuller’s Industrial IoT Portfolio.


ADVANCED Motion Controls Takes Servo Drives to New Heights (and Depths) with FlexPro Extended Environment Product Line

Advanced Motion Controls is proud to announce the addition of six new CANopen servo drives with Extended Environment capabilities to their FlexPro line. These new drives join AMC’s existing EtherCAT Extended Environment FlexPro drives, making the FlexPro line the go-to solution for motion control applications in harsh environments.

Many motion control applications take place in conditions that are less than ideal, such as extreme temperatures, high and low pressures, shocks and vibrations, and contamination. Electronics, including servo drives, can malfunction or sustain permanent damage in these conditions.

Read More


Service Wire Co. Announces New Titles for Key Executives

Bruce Kesler and Mark Gatewood have been given new titles and responsibilities for Service Wire Co.

Bruce Kesler has assumed the role of Senior Director – Business Development. Bruce will be responsible for Service Wire’s largest strategic accounts and our growing Strategic Accounts Team.

Mark Gatewood has been promoted to the role of Vice President – Sales & Marketing. In this role, Gatewood will lead the efforts of Service Wire Company’s entire sales and marketing organization in all market verticals.

Read More


Tri-Mach Announces the Purchase of an Additional 45,000 sq ft. Facility

Tri-Mach Elmira Facility

Recently, Tri-Mach Inc. was thrilled to announce the addition of a new 45,000 sq ft. facility. Located at 285 Union St., Elmira, ON, this facility expands Tri-Mach’s capabilities, allowing them to better serve the growing needs of their customers.

Positioning for growth, this additional facility will allow Tri-Mach to continue taking on large-scale projects, enhance product performance testing, and provide equipment storage for their customers. The building will also be the new home to their Skilled Trades Centre of Excellence.

Read More


JMP Parent Company, CONVERGIX Acquires AGR Automation, Expanding Global Reach

Convergix Automation Solutions has completed the acquisition of AGR Automation (“AGR”), a UK-based provider of custom, high-performance automation design and systems integration primarily to the life sciences industry.

Following Convergix’s acquisitions of JMP Solutions in August 2021 and Classic Design in February 2022, AGR marks the third investment in Crestview’s strategy to build Convergix into a diversified automation solutions provider targeting the global $500+ billion market, with a particular focus on the $70 billion global systems integration and connectivity segments. Financial terms of the transaction were not disclosed.

Read More


Latest Articles

  • How Advanced X-Ray and AI Inspection Technologies Optimize Quality Control and Reduce Costs in SMT Manufacturing

    How Advanced X-Ray and AI Inspection Technologies Optimize Quality Control and Reduce Costs in SMT Manufacturing

    Explore how Omron’s latest X-Ray machines and AI-driven solutions are setting new standards in manufacturing efficiency and quality control. The manufacturing landscape is swiftly evolving, and Omron is at the forefront with its innovative PCB inspection machines. These systems offer profound insights into SMT production process, enhanced quality control, and can significantly reduce labor costs. Advancements… Read More…

  • KUKA Establishes New Software and Digital Business Segment

    KUKA Establishes New Software and Digital Business Segment

    Software is playing an increasingly important role in mechanical engineering. What used to be mostly solved mechanically is now done by electronics and the associated software. “With KUKA Digital, we are expanding our offering in order to position ourselves broadly for a market with strong growth potential. Our customers need products, solutions and consulting approaches to digitalize… Read More…