Endress+Hauser on course for growth

February 19, 2020

Endress+Hauser remains on course for growth. In 2019 the Group increased its net sales by almost 8 percent to over 2.6 billion euros. The Swiss measurement and automation technology specialist created 400 new jobs worldwide. At the end of the year the company had more than 14,300 employees.

“We have grown across all fields of activity, industries and regions,” said Matthias Altendorf, CEO of the Endress+Hauser Group. Strong impetus came from Asia. Europe, the Americas, Africa and the Middle East developed positively, but at a much slower pace. “With good product innovations, we have set a clear benchmark in the industry,” emphasized Matthias Altendorf.

In 2019, order entry rose faster than sales. “Endress+Hauser has started 2020 with a significantly higher order backlog than the year before,” reported Chief Financial Officer Dr Luc Schultheiss. “The Group was able to maintain the return on sales at the previous year’s level. We are satisfied with our profit before taxes,” said the CFO.

Lower growth expectations for 2020

Endress+Hauser expects slower development in 2020. The Group anticipates sales growth in the midsingle-digit percentage range and aims to maintain profitability at a good level. “However, there are still many uncertainties,” stressed Luc Schultheiss.
Endress+Hauser will present its audited 2019 financial figures on 12 May 2020 in Basel, Switzerland.

For more information, visit www.endress.com.

Related Articles

ISA

New ISA/IEC Standard Specifies Cybersecurity Capabilities for Control System Components

 

The ISA/IEC 62443 series of standards, developed by the ISA99 committee as American National Standards and adopted globally by the International Electrotechnical Commission (IEC), is designed to provide a flexible framework to address and mitigate current and future security vulnerabilities in industrial automation and control systems (IACS).

 

 

Yokogawa

Yokogawa and Sphera Reach Agreement to Provide Risk Assessment and Consulting Services for Plant Facilities

 

Yokogawa Electric Corporation has announce that it has reached a go-to-market agreement with Sphera Solutions, Inc., a provider of integrated risk management software and information services focusing on environmental health & safety, operational risk, and product stewardship. Starting December 3, 2018, Yokogawa will offer Sphera’s risk assessment and consulting services.

 

 

Emerson to Join Project Margo to Help Drive Greater Industrial Edge Interoperability

Emerson to Join Project Margo to Help Drive Greater Industrial Edge Interoperability

Emerson is joining the Linux Foundation’s Margo, a new open-standard initiative designed to make edge applications, devices and orchestration software work together seamlessly across multi-vendor industrial automation environments. As process and discrete manufacturers implement enhanced digitalization, they encounter challenges at the edge due to multi-vendor and multi-technology devices, apps and orchestration environments that do not easily integrate. The Margo initiative addresses these challenges through the creation of practical reference implementation, open standards and testing toolkits.

Changing Scene

  • Wesco Opens State-of-the-Art Facility in Eastern Canada to Support Influx of Megaprojects in the Region

    Wesco Opens State-of-the-Art Facility in Eastern Canada to Support Influx of Megaprojects in the Region

    Wesco International has recently announced the grand opening of a new state-of-the-art facility on Higney Avenue in Dartmouth, Nova Scotia, Canada, making this the largest facility of any distributor in the Atlantic region. The new building, facilitated by Touchette Real Estate, a division of Groupe Touchette, will feature Wesco’s comprehensive suite of services and solutions including… Read More…

  • PataBid Nominated for Canadian Choice Award in Software Services

    PataBid Nominated for Canadian Choice Award in Software Services

    PataBid is proud to announce its nomination for a Canadian Choice Award in the Software Services category. This recognition highlights PataBid’s commitment to supporting the electrical contracting community across Canada by providing innovative estimating software solutions that streamline estimating processes and ensure predictable and profitable projects. Read More…

Sponsored Content
The Easy Way to the Industrial IoT

The way to the Industrial IoT does not have to be complicated. Whether access to valuable data is required or new, data-driven services are to be generated, Weidmuller enables its customers to go from data to value the easy way. Weidmuller’s comprehensive and cutting-edge IIoT portfolio applies to greenfield and brownfield applications. Weidmuller offers components and solutions from data acquisition, data pre-processing, data communication and data analysis.

Visit Weidmuller’s Industrial IoT Portfolio.

ADVANCED Motion Controls Takes Servo Drives to New Heights (and Depths) with FlexPro Extended Environment Product Line

Advanced Motion Controls is proud to announce the addition of six new CANopen servo drives with Extended Environment capabilities to their FlexPro line. These new drives join AMC’s existing EtherCAT Extended Environment FlexPro drives, making the FlexPro line the go-to solution for motion control applications in harsh environments.

Many motion control applications take place in conditions that are less than ideal, such as extreme temperatures, high and low pressures, shocks and vibrations, and contamination. Electronics, including servo drives, can malfunction or sustain permanent damage in these conditions.

Read More

Service Wire Co. Announces New Titles for Key Executives

Bruce Kesler and Mark Gatewood have been given new titles and responsibilities for Service Wire Co.

Bruce Kesler has assumed the role of Senior Director – Business Development. Bruce will be responsible for Service Wire’s largest strategic accounts and our growing Strategic Accounts Team.

Mark Gatewood has been promoted to the role of Vice President – Sales & Marketing. In this role, Gatewood will lead the efforts of Service Wire Company’s entire sales and marketing organization in all market verticals.

Read More

Tri-Mach Announces the Purchase of an Additional 45,000 sq ft. Facility

Tri-Mach Elmira Facility

Recently, Tri-Mach Inc. was thrilled to announce the addition of a new 45,000 sq ft. facility. Located at 285 Union St., Elmira, ON, this facility expands Tri-Mach’s capabilities, allowing them to better serve the growing needs of their customers.

Positioning for growth, this additional facility will allow Tri-Mach to continue taking on large-scale projects, enhance product performance testing, and provide equipment storage for their customers. The building will also be the new home to their Skilled Trades Centre of Excellence.

Read More

JMP Parent Company, CONVERGIX Acquires AGR Automation, Expanding Global Reach

Convergix Automation Solutions has completed the acquisition of AGR Automation (“AGR”), a UK-based provider of custom, high-performance automation design and systems integration primarily to the life sciences industry.

Following Convergix’s acquisitions of JMP Solutions in August 2021 and Classic Design in February 2022, AGR marks the third investment in Crestview’s strategy to build Convergix into a diversified automation solutions provider targeting the global $500+ billion market, with a particular focus on the $70 billion global systems integration and connectivity segments. Financial terms of the transaction were not disclosed.

Read More

Latest Articles

  • How Advanced X-Ray and AI Inspection Technologies Optimize Quality Control and Reduce Costs in SMT Manufacturing

    How Advanced X-Ray and AI Inspection Technologies Optimize Quality Control and Reduce Costs in SMT Manufacturing

    Explore how Omron’s latest X-Ray machines and AI-driven solutions are setting new standards in manufacturing efficiency and quality control. The manufacturing landscape is swiftly evolving, and Omron is at the forefront with its innovative PCB inspection machines. These systems offer profound insights into SMT production process, enhanced quality control, and can significantly reduce labor costs. Advancements… Read More…

  • KUKA Establishes New Software and Digital Business Segment

    KUKA Establishes New Software and Digital Business Segment

    Software is playing an increasingly important role in mechanical engineering. What used to be mostly solved mechanically is now done by electronics and the associated software. “With KUKA Digital, we are expanding our offering in order to position ourselves broadly for a market with strong growth potential. Our customers need products, solutions and consulting approaches to digitalize… Read More…