Online Training Session: Hazardous Area Requirements for Electrical Equipment

PBSI CSA logo 400

August 11, 2020

From equipment selection to wiring methods and installation requirements, the safe installation of electrical equipment in hazardous locations depends on rigorous attention to detail. This course will provide a foundation of knowledge to help operations, maintenance, safety, electrical professionals and other stakeholders systematically apply the requirements for designing, installing and maintaining electrical equipment in hazardous locations. It provides a complete review of requirements based on the zone and division systems of classification for explosive gas and dust atmospheres.

Participants will carefully examine the installation requirements based on applicable Codes, standards and best practices gaining an understanding of the differences between the CEC and NEC Codes with respect to the Zone and Division systems of classification, Hazloc product markings, and equipment construction and performance requirements. In addition, they will analyze installations to determine the wiring methods and equipment selection. This course covers both the installation and maintenance in Hazardous areas as well as product Certification.

Learning Objectives

  • Cover the Basics: Define hazardous locations and requirements for explosive gas and dust atmospheres
  • Become familiar with standardized area classifications
  • Understand explosion protection terminology, methods and flammability limits
  • Understand recommended protection methods for hazardous area installations
  • Learn to easily determine maintenance and installation requirements for electrical equipment in hazardous locations
  • Summarize requirements for combustible gas detection equipment
  • Acquire working knowledge for conducting installations to the North American Zone and Division system based on area classifications
  • Gain an understanding of hazardous area classifications and increase understanding of wiring methods and sealing in combustible gas, dust and fibre areas
  • Develop knowledge of IECEx, ATEX, North American and other certification schemes
  • Understand certification requirements for various types of equipment and details around special inspections and field evaluations

Source

Related Articles

Eclipse Automation

Eclipse Automation Expands in Cambridge and Hires Over 100 Employees to Support Record Growth

 

Eclipse Automation has announced the opening of a new facility in Cambridge, Ontario and the addition of over 120 high skilled team members this year to accommodate rapid growth. Strategically located at 385 Thompson Drive, the new facility will add additional 30,000 sq. ft. of much needed manufacturing space, expanding the company’s machining and assembly capabilities. This latest addition will be operational in Mid- December 2017 and will help to unify the company’s offerings, support current and upcoming automation contracts and reinforce Eclipse’s commitment to local manufacturing.

 

Fibox Expands Canadian Presence with Strategic Partnerships

Fibox Expands Canadian Presence with Strategic Partnerships

Fibox is thrilled to announce its strategic partnerships with two renowned Canadian manufacturer’s rep firms: KM Roberts & Associates Ltd. and Heritage Sales & Marketing Group. This collaboration marks a significant milestone for Fibox, strengthening the company’s commitment to providing outstanding service and support to Canadian customers.

Changing Scene

Sponsored Content
The Easy Way to the Industrial IoT

The way to the Industrial IoT does not have to be complicated. Whether access to valuable data is required or new, data-driven services are to be generated, Weidmuller enables its customers to go from data to value the easy way. Weidmuller’s comprehensive and cutting-edge IIoT portfolio applies to greenfield and brownfield applications. Weidmuller offers components and solutions from data acquisition, data pre-processing, data communication and data analysis.

Visit Weidmuller’s Industrial IoT Portfolio.

ADVANCED Motion Controls Takes Servo Drives to New Heights (and Depths) with FlexPro Extended Environment Product Line

Advanced Motion Controls is proud to announce the addition of six new CANopen servo drives with Extended Environment capabilities to their FlexPro line. These new drives join AMC’s existing EtherCAT Extended Environment FlexPro drives, making the FlexPro line the go-to solution for motion control applications in harsh environments.

Many motion control applications take place in conditions that are less than ideal, such as extreme temperatures, high and low pressures, shocks and vibrations, and contamination. Electronics, including servo drives, can malfunction or sustain permanent damage in these conditions.

Read More

Service Wire Co. Announces New Titles for Key Executives

Bruce Kesler and Mark Gatewood have been given new titles and responsibilities for Service Wire Co.

Bruce Kesler has assumed the role of Senior Director – Business Development. Bruce will be responsible for Service Wire’s largest strategic accounts and our growing Strategic Accounts Team.

Mark Gatewood has been promoted to the role of Vice President – Sales & Marketing. In this role, Gatewood will lead the efforts of Service Wire Company’s entire sales and marketing organization in all market verticals.

Read More

Tri-Mach Announces the Purchase of an Additional 45,000 sq ft. Facility

Tri-Mach Elmira Facility

Recently, Tri-Mach Inc. was thrilled to announce the addition of a new 45,000 sq ft. facility. Located at 285 Union St., Elmira, ON, this facility expands Tri-Mach’s capabilities, allowing them to better serve the growing needs of their customers.

Positioning for growth, this additional facility will allow Tri-Mach to continue taking on large-scale projects, enhance product performance testing, and provide equipment storage for their customers. The building will also be the new home to their Skilled Trades Centre of Excellence.

Read More

JMP Parent Company, CONVERGIX Acquires AGR Automation, Expanding Global Reach

Convergix Automation Solutions has completed the acquisition of AGR Automation (“AGR”), a UK-based provider of custom, high-performance automation design and systems integration primarily to the life sciences industry.

Following Convergix’s acquisitions of JMP Solutions in August 2021 and Classic Design in February 2022, AGR marks the third investment in Crestview’s strategy to build Convergix into a diversified automation solutions provider targeting the global $500+ billion market, with a particular focus on the $70 billion global systems integration and connectivity segments. Financial terms of the transaction were not disclosed.

Read More

Latest Articles

  • Implementing Functional Safety Requirements

    Implementing Functional Safety Requirements

    The Safety Functional Requirements Specification (SFRS; sometimes referred to as SRS or Safety Requirements Specification) is the plan for the safety controls on a machine and is the second step of the safety lifecycle. The SFRS document serves as a framework for the safety control system design, is informed by prior work done in the… Read More…

  • From Endress+Hauser, 24/7 Digital, Plant-Wide Health Monitoring for Rockwell Systems Optimizes Workflows and Processes

    From Endress+Hauser, 24/7 Digital, Plant-Wide Health Monitoring for Rockwell Systems Optimizes Workflows and Processes

    Endress+Hauser’s Asset Health Monitoring Solution–Rockwell Edition, now available for installation, provides operators with a centralized, digital overview of plant-wide device health to avoid unscheduled shutdowns and accelerate troubleshooting. It not only presents early visibility of problematic devices but distinguishes itself by adding likely causes and remedies to such a report so problems can be fixed… Read More…