Updated Edition of ISO 3691-4 Published

November 9, 2023

The updated edition of the international standard for automated guided vehicle systems has been available since June 2023.

What is ISO 3691-4?

ISO 3691-4, “Industrial trucks – Safety requirements and verification – Part 4: Driverless industrial trucks and their systems” is the most important international standard for automated guided vehicles (AGV) and vehicle systems (AGVS). It was published in 2020 and applies to manufacturers as well as operators. It defines the requirements (performance levels) of the safety functions of AGV and AGVS, such as the setup for the detection of persons, modes of operation and the braking system. It also describes the procedure for risk reduction and validation of the automated functions, to guarantee smooth and safe operation of the AGV and AGVS in their final installation environment.

The key changes for manufacturers and operators

The updated edition of the standard ISO 3691-4 has been available since June 2023. The update was necessary in order to adapt the standard to the state of the art and define the requirements more clearly.

Here are some of the subjects that have been defined more clearly or expanded in the updated version of ISO 3691-4:
  • Detailed requirements for the “active detection field” and the “operational stop”
  • More precise definition of the “Stop function”, including the maximum distances between the emergency stop devices
  • Updated requirements for access and protection of passengers on AGV
  • Better correlation with the electrical requirements of EN 1175:2020
  • Description of additional hazards, such as transport, temperature, emissions, electrostatic aspects etc.

The current version of ISO 3691-4 also describes the framework conditions that must apply to allow the system to operate at higher speed in the so-called “restricted zones”. In this case, a detailed analysis and assessment of the hazards and the implementation of corresponding additional measures are required.

More Information

International training on safety requirements and integration of AGVs

For you, Pilz always has a finger on the market’s pulse: Of course, their training courses are based on the latest standards and requirements and are regularly updated. Pilz’s international online training enables practical professional development, live from anywhere. Learn more here

Safe operation of automated guided vehicle systems

In addition, Pilz offers comprehensive solutions and services to manufacturers and operators of AGVs: From development of the system concept in the design phase through to commissioning, they can accompany you as a partner with their expertise, so that your AGVs run with maximum safety. Learn more here

Related Articles

DCS PBSI PC FebSpecial 400

Phoenix Contact Quarterly Special: Never Take a good Connection for Granted

Never take a good connection for granted. Every wire in your control cabinet is there for reason. The connections of those wires – via spring, screw, IDC, or crimp – are only as reliable as the quality of the terminations. For nearly a century, Phoenix Contact has been a trusted partner for reliable connections.

 

 

 

Vanco Electrical Supplies Ltd. Rebrands to Vanco Electrical Solutions

Vanco Electrical Supplies Ltd. Rebrands to Vanco Electrical Solutions

August 27, 2024 Vanco is thrilled to announce their rebranding from Vanco Electrical Supplies Ltd. to Vanco Electrical Solutions Ltd. This change is not just a shift in name but a reflection of their evolving mission and dedication to clients. Why the Change? “Vanco Electrical Supplies Ltd. has been a trusted name in the industry…

Schneider 400

New study by Schneider Electric reveals tangible benefits for businesses and organizations globally when they lead with Digital Transformation in Energy Management and Automation

Schneider Electric, a global leader in digital transformation of energy management and automation, today released the Global Digital Transformation Benefits Report 2019, presenting concrete evidence of the power of digitization across the spectrum of global industry, commerce and the public sector.

 

 

 

Changing Scene

Sponsored Content
The Easy Way to the Industrial IoT

The way to the Industrial IoT does not have to be complicated. Whether access to valuable data is required or new, data-driven services are to be generated, Weidmuller enables its customers to go from data to value the easy way. Weidmuller’s comprehensive and cutting-edge IIoT portfolio applies to greenfield and brownfield applications. Weidmuller offers components and solutions from data acquisition, data pre-processing, data communication and data analysis.

Visit Weidmuller’s Industrial IoT Portfolio.

ADVANCED Motion Controls Takes Servo Drives to New Heights (and Depths) with FlexPro Extended Environment Product Line

Advanced Motion Controls is proud to announce the addition of six new CANopen servo drives with Extended Environment capabilities to their FlexPro line. These new drives join AMC’s existing EtherCAT Extended Environment FlexPro drives, making the FlexPro line the go-to solution for motion control applications in harsh environments.

Many motion control applications take place in conditions that are less than ideal, such as extreme temperatures, high and low pressures, shocks and vibrations, and contamination. Electronics, including servo drives, can malfunction or sustain permanent damage in these conditions.

Read More

Service Wire Co. Announces New Titles for Key Executives

Bruce Kesler and Mark Gatewood have been given new titles and responsibilities for Service Wire Co.

Bruce Kesler has assumed the role of Senior Director – Business Development. Bruce will be responsible for Service Wire’s largest strategic accounts and our growing Strategic Accounts Team.

Mark Gatewood has been promoted to the role of Vice President – Sales & Marketing. In this role, Gatewood will lead the efforts of Service Wire Company’s entire sales and marketing organization in all market verticals.

Read More

Tri-Mach Announces the Purchase of an Additional 45,000 sq ft. Facility

Tri-Mach Elmira Facility

Recently, Tri-Mach Inc. was thrilled to announce the addition of a new 45,000 sq ft. facility. Located at 285 Union St., Elmira, ON, this facility expands Tri-Mach’s capabilities, allowing them to better serve the growing needs of their customers.

Positioning for growth, this additional facility will allow Tri-Mach to continue taking on large-scale projects, enhance product performance testing, and provide equipment storage for their customers. The building will also be the new home to their Skilled Trades Centre of Excellence.

Read More

JMP Parent Company, CONVERGIX Acquires AGR Automation, Expanding Global Reach

Convergix Automation Solutions has completed the acquisition of AGR Automation (“AGR”), a UK-based provider of custom, high-performance automation design and systems integration primarily to the life sciences industry.

Following Convergix’s acquisitions of JMP Solutions in August 2021 and Classic Design in February 2022, AGR marks the third investment in Crestview’s strategy to build Convergix into a diversified automation solutions provider targeting the global $500+ billion market, with a particular focus on the $70 billion global systems integration and connectivity segments. Financial terms of the transaction were not disclosed.

Read More

Latest Articles

  • Automated Test Equipment (ATE) Revival: Repurposing and Extending the Life of Aging ATE Systems

    Automated Test Equipment (ATE) Revival: Repurposing and Extending the Life of Aging ATE Systems

    Automated Test Equipment (ATE) and Automated Test Systems (ATS) serve the critical purpose of ensuring that electronic devices operate according to specifications in the field. As such, these systems are widely utilized for testing automotive electronics, batteries, telecom infrastructure, renewable energy systems, and consumer electronics. The aerospace and defense sectors also make substantial investments in… Read More…

  • Partner Country Canada at HANNOVER MESSE 2025: The Future’s Here

    Partner Country Canada at HANNOVER MESSE 2025: The Future’s Here

    Canada is Partner Country of HANNOVER MESSE 2025, underscoring the strong economic and political ties between “The True North” and Germany. Canada announced its Partner Country commitment in August 2022 when Canadian Prime Minister Justin Trudeau hosted German Chancellor Olaf Scholz in Canada. Canada’s starring role from 31 March to 4 April 2025 at HANNOVER… Read More…