Pepperl+Fuchs Comtrol Launches a New Line of DeviceMaster® Industrial Gateways That Support EtherNet/IP to Modbus Communication

June 20, 2019

Pepperl+Fuchs Comtrol, a leading manufacturer of industrial device connectivity products and Pepperl+Fuchs’ official North American IO-Link competence center, is announcing a new product family within its DeviceMaster® industrial gateway lineup. DeviceMaster EIP-MOD gateways allow communication between EtherNet/IP controllers and Modbus master controllers.

The new gateways enable EtherNet/IP controllers—such as CIP complaint controllers that support Class 1 and Class 3 connections, including PLCs, HMIs, SCADA systems, and OPC servers—to connect to Modbus master controllers. This includes serial Modbus RTU/ASCII interfaces, Modbus TCP interfaces, and Modbus RTU/ASCII over Ethernet TCP/IP.

DeviceMaster EIP-MOD gateways offer a paradigm shift in EtherNet/IP to Modbus communications. They provide highly flexible EtherNet/IP interfaces, the most advanced Modbus gateway functionality available, and a built-in data mapping feature that provides a Modbus Concentrator and direct EtherNet/IP controller to Modbus device communication. Web-based setup is performed with intuitive, embedded configuration pages that include data mapping verification and display of the shared memory map. The extensive diagnostics web pages are designed to aid maintenance and troubleshooting tasks.

“While other EtherNet/IP to Modbus products provide only limited EtherNet/IP controller to Modbus/RTU serial device connectivity, the DeviceMaster EIP-MOD gateway is designed to completely integrate EtherNet/IP controllers and Modbus networks. Now a vast variety of EtherNet/IP controllers, Modbus masters, and Modbus slave devices, both locally and remotely attached, can all communicate to each other,” says Pepperl+Fuchs Comtrol’s, Principal Software Engineer.

Pepperl+Fuchs Comtrol is excited to add the Ethernet IP to Modbus translation functionality to its series of industrial Ethernet gateways and protocol translators. With the DeviceMaster EIP-MOD gateways, customers now have more visibility and control for implementing IIoT and Industry 4.0 initiatives, while those needing to merge legacy Modbus networks into Ethernet/IP or add Modbus devices into an existing Ethernet/IP controlled machine or factory have an intuitive and flexible solution.

For more information, visit https://comtrol.com/.

Related Articles

HANNOVER MESSE Digital Days – the Online Event for the Industry

HANNOVER MESSE Digital Days – the Online Event for the Industry

With the Digital Days on 14 and 15 July 2020, HANNOVER MESSE is adding a virtual show to its portfolio. Their new community event for industry focuses on the latest developments in the fields of industry, energy and logistics, addressing the question of how industrial transformation can succeed and which approaches industry needs to recover quickly from the consequences of the shutdown.

 

 

 

PB 25 FANUC logo 400

FANUC Launches New “Take Control” Virtual Event

FANUC will launch its first virtual event called “Take Control”.  The event will debut Oct. 19-22, and include three distinct zones: Knowledge, Solutions and Exploration. “For manufacturers, there’s nothing like the opportunity to visit tradeshows like IMTS, Pack Expo, FABTECH and many other technology events that feature automation and robotics,” said Mike Cicco, president and CEO, FANUC America.

 

 

 

Slim Ethernet IO Modules and Powerful I/O Hubs Complete the Range of Standardized Fieldbus Modules

Slim Ethernet IO Modules and Powerful I/O Hubs Complete the Range of Standardized Fieldbus Modules

Ethernet IO modules with integrated IO-Link master enable communication, diagnostics, and parameterization from the control system to the sensor level. I/O hubs can also be connected to an IO-Link master that allows binary sensors and actuators to be flexibly integrated into an intelligent IO-Link system.

 

 

 

Siemens Reimagines Canadain Geadquarters for 110 Anniversary 1 400

Siemens Reimagines Canadian Headquarters For 110th Anniversary with Customer Co-Creation at Its Core

 

Customers and employees, as well as special guest Oakville Mayor Rob Burton were on hand at Siemens Canada’s headquarters for the unveiling of a newly renovated office focused on a co-creation environment. During the pandemic Siemens used the opportunity with many employees working safely from home to convert a substantial portion of its Oakville headquarters to create a showcase for Siemens’ technologies that address climate change, the 4th Industrial revolution, and digitalization across different sectors.

 

Emerson Expands Asset Management Coverage for Faster Integration in Projects and Operations

Emerson Expands Asset Management Coverage for Faster Integration in Projects and Operations

Emerson has expanded AMS Device Managerwith HART-IP support, making it easier to connect with devices and control systems and potentially eliminate hundreds of thousands of dollars in project hardware and engineering. AMS Device Manager is used by thousands of facilities across the globe to streamline installation of field devices during capital projects, increase safety system uptime, and quickly and safely test devices from the control room.

 

 

 

Changing Scene

  • Wesco Opens State-of-the-Art Facility in Eastern Canada to Support Influx of Megaprojects in the Region

    Wesco Opens State-of-the-Art Facility in Eastern Canada to Support Influx of Megaprojects in the Region

    Wesco International has recently announced the grand opening of a new state-of-the-art facility on Higney Avenue in Dartmouth, Nova Scotia, Canada, making this the largest facility of any distributor in the Atlantic region. The new building, facilitated by Touchette Real Estate, a division of Groupe Touchette, will feature Wesco’s comprehensive suite of services and solutions including… Read More…

  • PataBid Nominated for Canadian Choice Award in Software Services

    PataBid Nominated for Canadian Choice Award in Software Services

    PataBid is proud to announce its nomination for a Canadian Choice Award in the Software Services category. This recognition highlights PataBid’s commitment to supporting the electrical contracting community across Canada by providing innovative estimating software solutions that streamline estimating processes and ensure predictable and profitable projects. Read More…

Sponsored Content
The Easy Way to the Industrial IoT

The way to the Industrial IoT does not have to be complicated. Whether access to valuable data is required or new, data-driven services are to be generated, Weidmuller enables its customers to go from data to value the easy way. Weidmuller’s comprehensive and cutting-edge IIoT portfolio applies to greenfield and brownfield applications. Weidmuller offers components and solutions from data acquisition, data pre-processing, data communication and data analysis.

Visit Weidmuller’s Industrial IoT Portfolio.

ADVANCED Motion Controls Takes Servo Drives to New Heights (and Depths) with FlexPro Extended Environment Product Line

Advanced Motion Controls is proud to announce the addition of six new CANopen servo drives with Extended Environment capabilities to their FlexPro line. These new drives join AMC’s existing EtherCAT Extended Environment FlexPro drives, making the FlexPro line the go-to solution for motion control applications in harsh environments.

Many motion control applications take place in conditions that are less than ideal, such as extreme temperatures, high and low pressures, shocks and vibrations, and contamination. Electronics, including servo drives, can malfunction or sustain permanent damage in these conditions.

Read More

Service Wire Co. Announces New Titles for Key Executives

Bruce Kesler and Mark Gatewood have been given new titles and responsibilities for Service Wire Co.

Bruce Kesler has assumed the role of Senior Director – Business Development. Bruce will be responsible for Service Wire’s largest strategic accounts and our growing Strategic Accounts Team.

Mark Gatewood has been promoted to the role of Vice President – Sales & Marketing. In this role, Gatewood will lead the efforts of Service Wire Company’s entire sales and marketing organization in all market verticals.

Read More

Tri-Mach Announces the Purchase of an Additional 45,000 sq ft. Facility

Tri-Mach Elmira Facility

Recently, Tri-Mach Inc. was thrilled to announce the addition of a new 45,000 sq ft. facility. Located at 285 Union St., Elmira, ON, this facility expands Tri-Mach’s capabilities, allowing them to better serve the growing needs of their customers.

Positioning for growth, this additional facility will allow Tri-Mach to continue taking on large-scale projects, enhance product performance testing, and provide equipment storage for their customers. The building will also be the new home to their Skilled Trades Centre of Excellence.

Read More

JMP Parent Company, CONVERGIX Acquires AGR Automation, Expanding Global Reach

Convergix Automation Solutions has completed the acquisition of AGR Automation (“AGR”), a UK-based provider of custom, high-performance automation design and systems integration primarily to the life sciences industry.

Following Convergix’s acquisitions of JMP Solutions in August 2021 and Classic Design in February 2022, AGR marks the third investment in Crestview’s strategy to build Convergix into a diversified automation solutions provider targeting the global $500+ billion market, with a particular focus on the $70 billion global systems integration and connectivity segments. Financial terms of the transaction were not disclosed.

Read More

Latest Articles

  • How Advanced X-Ray and AI Inspection Technologies Optimize Quality Control and Reduce Costs in SMT Manufacturing

    How Advanced X-Ray and AI Inspection Technologies Optimize Quality Control and Reduce Costs in SMT Manufacturing

    Explore how Omron’s latest X-Ray machines and AI-driven solutions are setting new standards in manufacturing efficiency and quality control. The manufacturing landscape is swiftly evolving, and Omron is at the forefront with its innovative PCB inspection machines. These systems offer profound insights into SMT production process, enhanced quality control, and can significantly reduce labor costs. Advancements… Read More…

  • KUKA Establishes New Software and Digital Business Segment

    KUKA Establishes New Software and Digital Business Segment

    Software is playing an increasingly important role in mechanical engineering. What used to be mostly solved mechanically is now done by electronics and the associated software. “With KUKA Digital, we are expanding our offering in order to position ourselves broadly for a market with strong growth potential. Our customers need products, solutions and consulting approaches to digitalize… Read More…