Ryson: Bag Handling Spiral Conveyors

October 8, 2019

Ryson’s Integrator Partner, ProVantage Automation specified four of our model 1600-500 Unit Load Spirals to incline the bags to an elevation of 11’. These bag handling spirals were the best value in saving floor space and are robust enough to handle the heavy loads. They will be used to feed conveyors that supply the bag palletizers in another area of the plant. The spirals shipped totally pre-assembled, reducing on-site implementation costs.

Ryson’s innovative slat belt can handle such heavy loads because it enables a low friction operation without any sliding movements or wear-strips. The slats are supported by precision steel roller bearings which ride on a polyurethane surface. This design effectively takes up the side forces created by a tight radius and at the same time increases the load carrying capacity of the chain up to 75 lbs per linear foot. This design facilitates high speed, low noise, low maintenance and long life, which ultimately helps lower your overall cost of ownership.

Source

Related Articles

ABB Selected to Supply New Automated Paper Testing Solution at Progroup’s Most Environmentally Friendly Mill

ABB Selected to Supply New Automated Paper Testing Solution at Progroup’s Most Environmentally Friendly Mill

ABB has been selected by Progroup – one of Europe’s leading containerboard and corrugated board manufacturers – to supply and install its latest L&W Autoline automated paper testing solution for a new 750,000 tonne-capacity PM3 paper machine at Progroup’s third ultra-modern mill in Sandersdorf-Brehna, Germany.

 

 

 

Husky Injection Molding Systems Honors Beckhoff with EMEA Supplier Award

Husky Injection Molding Systems Honors Beckhoff with EMEA Supplier Award

The type of fruitful development partnership and trusting, reliable relationship that has existed between Canadian machine manufacturer Husky Injection Molding Systems and control system supplier Beckhoff for roughly 20 years is a rarity these days. Husky recently underscored this by honoring Beckhoff with its EMEA Supplier Award at the K 2019 trade show held in Düsseldorf, Germany, in October.

 

 

 

RS Adds Seven New Suppliers That Expand its Selection of Lighting, Enclosure, and Connectivity Products
|

RS Adds Seven New Suppliers That Expand its Selection of Lighting, Enclosure, and Connectivity Products

RS has recently added seven new suppliers: Columbia Lighting, Compass, Dual-Lite, EXO Outdoor Lighting, NX Lighting Controls, Phoenix Mecano, and Remke. The seven new suppliers provide customers with access to an even broader selection of commercial, industrial, and outdoor lighting, electrical and electronic enclosures, and cable grips and cord connectors.

Changing Scene

Sponsored Content
The Easy Way to the Industrial IoT

The way to the Industrial IoT does not have to be complicated. Whether access to valuable data is required or new, data-driven services are to be generated, Weidmuller enables its customers to go from data to value the easy way. Weidmuller’s comprehensive and cutting-edge IIoT portfolio applies to greenfield and brownfield applications. Weidmuller offers components and solutions from data acquisition, data pre-processing, data communication and data analysis.

Visit Weidmuller’s Industrial IoT Portfolio.

ADVANCED Motion Controls Takes Servo Drives to New Heights (and Depths) with FlexPro Extended Environment Product Line

Advanced Motion Controls is proud to announce the addition of six new CANopen servo drives with Extended Environment capabilities to their FlexPro line. These new drives join AMC’s existing EtherCAT Extended Environment FlexPro drives, making the FlexPro line the go-to solution for motion control applications in harsh environments.

Many motion control applications take place in conditions that are less than ideal, such as extreme temperatures, high and low pressures, shocks and vibrations, and contamination. Electronics, including servo drives, can malfunction or sustain permanent damage in these conditions.

Read More

Service Wire Co. Announces New Titles for Key Executives

Bruce Kesler and Mark Gatewood have been given new titles and responsibilities for Service Wire Co.

Bruce Kesler has assumed the role of Senior Director – Business Development. Bruce will be responsible for Service Wire’s largest strategic accounts and our growing Strategic Accounts Team.

Mark Gatewood has been promoted to the role of Vice President – Sales & Marketing. In this role, Gatewood will lead the efforts of Service Wire Company’s entire sales and marketing organization in all market verticals.

Read More

Tri-Mach Announces the Purchase of an Additional 45,000 sq ft. Facility

Tri-Mach Elmira Facility

Recently, Tri-Mach Inc. was thrilled to announce the addition of a new 45,000 sq ft. facility. Located at 285 Union St., Elmira, ON, this facility expands Tri-Mach’s capabilities, allowing them to better serve the growing needs of their customers.

Positioning for growth, this additional facility will allow Tri-Mach to continue taking on large-scale projects, enhance product performance testing, and provide equipment storage for their customers. The building will also be the new home to their Skilled Trades Centre of Excellence.

Read More

JMP Parent Company, CONVERGIX Acquires AGR Automation, Expanding Global Reach

Convergix Automation Solutions has completed the acquisition of AGR Automation (“AGR”), a UK-based provider of custom, high-performance automation design and systems integration primarily to the life sciences industry.

Following Convergix’s acquisitions of JMP Solutions in August 2021 and Classic Design in February 2022, AGR marks the third investment in Crestview’s strategy to build Convergix into a diversified automation solutions provider targeting the global $500+ billion market, with a particular focus on the $70 billion global systems integration and connectivity segments. Financial terms of the transaction were not disclosed.

Read More

Latest Articles

  • Implementing Functional Safety Requirements

    Implementing Functional Safety Requirements

    The Safety Functional Requirements Specification (SFRS; sometimes referred to as SRS or Safety Requirements Specification) is the plan for the safety controls on a machine and is the second step of the safety lifecycle. The SFRS document serves as a framework for the safety control system design, is informed by prior work done in the… Read More…

  • From Endress+Hauser, 24/7 Digital, Plant-Wide Health Monitoring for Rockwell Systems Optimizes Workflows and Processes

    From Endress+Hauser, 24/7 Digital, Plant-Wide Health Monitoring for Rockwell Systems Optimizes Workflows and Processes

    Endress+Hauser’s Asset Health Monitoring Solution–Rockwell Edition, now available for installation, provides operators with a centralized, digital overview of plant-wide device health to avoid unscheduled shutdowns and accelerate troubleshooting. It not only presents early visibility of problematic devices but distinguishes itself by adding likely causes and remedies to such a report so problems can be fixed… Read More…