Legrand honored by 2019 Cabling Installation & Maintenance Innovators Awards

October 22, 2019

Legrand North and Central America, a global innovation leader in power, light, and data technologies for homes, workplaces, and data centers, announced today that its data infrastructure solutions were recognized among the best in the industry by the 2019 Cabling Installation & Maintenance Innovators Awards. The stellar third-party judging panel included cabling and communications system specifiers, designers, integrators and managers with vast professional experience.

Legrand was recognized as a Gold and Silver honoree spanning five separate solutions.

“On behalf of the Cabling Installation & Maintenance Innovators Awards, I would like to congratulate Legrand on their Gold and Silver–level honoree status,” said Cabling Installation & Maintenance’s Chief Editor Patrick McLaughlin. “This competitive, unbiased program celebrates the most original and innovative products in the Industry.”

Intellicore – Softawre-Defined Connectivity – Gold

Intellicore utilizes software defined networking (SDN) to offer you an alternative topology in your data center that gives you full software control and software cross connection capability for each fiber “lane” in your fiber network. Intellicore merges SDN with Legrand’s fiber connectivity and physical infrastructure solutions to enable complete software integrated physical networking capability.

LP-Series Power Distribution Units – Gold

Legrand’s new line of LP-Series Power Distribution products offers customers a blended solution of functionality and cost savings. The single-phase line of PDUs comprises of models that can be mounted vertically or horizontally, fitting into most applications found in commercial LAN environments or smaller data centers. Legrand implemented several features into this new line of basic, network-metered or network-switched PDUs that are designed to improve the installation experience and management of a rack’s power distribution.

Clarity Shielded High Density Jack – Silver

The Clarity Shielded High Density Jack (HDJS) utilizes Legrand’s innovative rear-loading HDJ footprint, allowing for compatible installation into existing HDJ mounting solutions and new shielded modular patch panels. In addition, due to the shared HDJ footprint, fiber and A/V modules can be installed alongside copper modules in any HDJ mounting solution, allowing for mixed media within the same rack unit or device-end mounting solution.

Infinium Fiber Splice Cassette – Silver

Legrand’s Splice Cassettes enable fast field termination and provides cable management within the housing. They are designed for use with either Single-Mode (OS2) or Multimode (OM3/OM4) fiber, features 12 or 24 fibers in LC Duplex, LC Quad, or SC Duplex connector styles. Both the 12 and 24 fiber cassettes support fusion splicing of individual or ribbon fibers. Heat shrinks, pigtail slack and cable slack are all managed within the cassette and eliminates the need for individual splice trays or special housings. Splicing can also be done away from the rack housing if needed.

EZ Patch Flat Pack – Silver

With EZ Patch Flat Pack, all the patch cords are laid out flat in a single plastic bag in quantities of 12 or 24 patch cords. Due to the flat package and arrangement of cords there is no cable memory to deal with when removed from the packaging, and a contractor can quickly populate a patch panel without opening multiple bags or removing tie wraps. The result is less overall waste and reduced installation time, simplifying the experience. EZ Patch Flat Pack also comes in standard and reduced (28 AWG) diameters from CAT 5e to CAT 6A.

Source

Related Articles


Changing Scene


Sponsored Content
The Easy Way to the Industrial IoT

The way to the Industrial IoT does not have to be complicated. Whether access to valuable data is required or new, data-driven services are to be generated, Weidmuller enables its customers to go from data to value the easy way. Weidmuller’s comprehensive and cutting-edge IIoT portfolio applies to greenfield and brownfield applications. Weidmuller offers components and solutions from data acquisition, data pre-processing, data communication and data analysis.

Visit Weidmuller’s Industrial IoT Portfolio.


ADVANCED Motion Controls Takes Servo Drives to New Heights (and Depths) with FlexPro Extended Environment Product Line

Advanced Motion Controls is proud to announce the addition of six new CANopen servo drives with Extended Environment capabilities to their FlexPro line. These new drives join AMC’s existing EtherCAT Extended Environment FlexPro drives, making the FlexPro line the go-to solution for motion control applications in harsh environments.

Many motion control applications take place in conditions that are less than ideal, such as extreme temperatures, high and low pressures, shocks and vibrations, and contamination. Electronics, including servo drives, can malfunction or sustain permanent damage in these conditions.

Read More


Service Wire Co. Announces New Titles for Key Executives

Bruce Kesler and Mark Gatewood have been given new titles and responsibilities for Service Wire Co.

Bruce Kesler has assumed the role of Senior Director – Business Development. Bruce will be responsible for Service Wire’s largest strategic accounts and our growing Strategic Accounts Team.

Mark Gatewood has been promoted to the role of Vice President – Sales & Marketing. In this role, Gatewood will lead the efforts of Service Wire Company’s entire sales and marketing organization in all market verticals.

Read More


Tri-Mach Announces the Purchase of an Additional 45,000 sq ft. Facility

Tri-Mach Elmira Facility

Recently, Tri-Mach Inc. was thrilled to announce the addition of a new 45,000 sq ft. facility. Located at 285 Union St., Elmira, ON, this facility expands Tri-Mach’s capabilities, allowing them to better serve the growing needs of their customers.

Positioning for growth, this additional facility will allow Tri-Mach to continue taking on large-scale projects, enhance product performance testing, and provide equipment storage for their customers. The building will also be the new home to their Skilled Trades Centre of Excellence.

Read More


JMP Parent Company, CONVERGIX Acquires AGR Automation, Expanding Global Reach

Convergix Automation Solutions has completed the acquisition of AGR Automation (“AGR”), a UK-based provider of custom, high-performance automation design and systems integration primarily to the life sciences industry.

Following Convergix’s acquisitions of JMP Solutions in August 2021 and Classic Design in February 2022, AGR marks the third investment in Crestview’s strategy to build Convergix into a diversified automation solutions provider targeting the global $500+ billion market, with a particular focus on the $70 billion global systems integration and connectivity segments. Financial terms of the transaction were not disclosed.

Read More


Latest Articles

  • Implementing Functional Safety Requirements

    Implementing Functional Safety Requirements

    The Safety Functional Requirements Specification (SFRS; sometimes referred to as SRS or Safety Requirements Specification) is the plan for the safety controls on a machine and is the second step of the safety lifecycle. The SFRS document serves as a framework for the safety control system design, is informed by prior work done in the… Read More…

  • From Endress+Hauser, 24/7 Digital, Plant-Wide Health Monitoring for Rockwell Systems Optimizes Workflows and Processes

    From Endress+Hauser, 24/7 Digital, Plant-Wide Health Monitoring for Rockwell Systems Optimizes Workflows and Processes

    Endress+Hauser’s Asset Health Monitoring Solution–Rockwell Edition, now available for installation, provides operators with a centralized, digital overview of plant-wide device health to avoid unscheduled shutdowns and accelerate troubleshooting. It not only presents early visibility of problematic devices but distinguishes itself by adding likely causes and remedies to such a report so problems can be fixed… Read More…