International Manufacturing Technology Show Cancelled for First Time Since WWII

June 9, 2020

Because of health and safety requirements imposed by the state of Illinois for holding conventions, which include the availability of a vaccine for the COVID-19 virus or a highly effective treatment protocol, IMTS – The International Manufacturing Technology Show has announced that it has cancelled IMTS 2020

IMTS will offer two comprehensive digital programs, IMTS Network and IMTS Spark, over the next several months to assist exhibitors and the manufacturing community. IMTS is fully committed to returning to McCormick Place as scheduled for its normal rotation, September 13-18, 2022.

“The show has been held uninterrupted for more than 80 years, but now the global coronavirus health crisis requires the cancellation of what would have been the 34th edition of IMTS for the health and safety of our exhibitors, audiences and local business community,” says Peter R. Eelman, Vice President & CXO at AMT – The Association For Manufacturing Technology, which owns and produces IMTS. “Our organization and its members take immense pride in presenting one of the world’s largest manufacturing technology events, one that dates back to 1927. The cancellation is especially poignant because the show was poised to offer an unmatched breadth and depth of resources to help industry rethink, reestablish and reengage with supply chains disrupted by COVID-19.”

Visitors who have registered for IMTS 2020 have the choice to receive a refund on registration or transfer their registration to a tax-deductible donation to Miles For Manufacturing, where every dollar is given to programs that prepare students for careers in manufacturing technology. Exhibitors will receive direct communications from IMTS. 

Digital Experiences
While acknowledging that an in-person show can never be replaced with a digital event, Eelman says IMTS feels a responsibility to provide exhibitors and visitors a way to connect. “In the near future, we will launch the IMTS Network and IMTS Spark to provide the IMTS exhibitors and visitors with connections, networking opportunities and technical knowledge,” says Eelman. 

The IMTS Network will live-stream a wide variety of features and human-interest stories from the Manufacturing Technology sector. IMTS Spark, a new program, will be a comprehensive digital platform that connects IMTS exhibitors and visitors, provides educational and networking opportunities and offers first rate experiences, will launch in the near future. 

IMTS had already taken action to help manufacturers address supply chain issues created by COVID-19. The IMTS.com/supplychain microsite — ReBuilding the Supply Chain — shows OEMs how to rethink their current operations, how they can reengage with suppliers and secure trading partners and how they can reestablish connections for a more localized industrial base. It includes a brief history of why the supply chain disruption occurred, and IMTS has mapped out future content to show steps that can be taken to secure the supply chain moving forward.

More details will be announced in IMTS publications later in the week.

For more information, visit www.imts.com.

Related Articles


Changing Scene

  • Wesco Opens State-of-the-Art Facility in Eastern Canada to Support Influx of Megaprojects in the Region

    Wesco Opens State-of-the-Art Facility in Eastern Canada to Support Influx of Megaprojects in the Region

    Wesco International has recently announced the grand opening of a new state-of-the-art facility on Higney Avenue in Dartmouth, Nova Scotia, Canada, making this the largest facility of any distributor in the Atlantic region. The new building, facilitated by Touchette Real Estate, a division of Groupe Touchette, will feature Wesco’s comprehensive suite of services and solutions including… Read More…

  • PataBid Nominated for Canadian Choice Award in Software Services

    PataBid Nominated for Canadian Choice Award in Software Services

    PataBid is proud to announce its nomination for a Canadian Choice Award in the Software Services category. This recognition highlights PataBid’s commitment to supporting the electrical contracting community across Canada by providing innovative estimating software solutions that streamline estimating processes and ensure predictable and profitable projects. Read More…


Sponsored Content
The Easy Way to the Industrial IoT

The way to the Industrial IoT does not have to be complicated. Whether access to valuable data is required or new, data-driven services are to be generated, Weidmuller enables its customers to go from data to value the easy way. Weidmuller’s comprehensive and cutting-edge IIoT portfolio applies to greenfield and brownfield applications. Weidmuller offers components and solutions from data acquisition, data pre-processing, data communication and data analysis.

Visit Weidmuller’s Industrial IoT Portfolio.


ADVANCED Motion Controls Takes Servo Drives to New Heights (and Depths) with FlexPro Extended Environment Product Line

Advanced Motion Controls is proud to announce the addition of six new CANopen servo drives with Extended Environment capabilities to their FlexPro line. These new drives join AMC’s existing EtherCAT Extended Environment FlexPro drives, making the FlexPro line the go-to solution for motion control applications in harsh environments.

Many motion control applications take place in conditions that are less than ideal, such as extreme temperatures, high and low pressures, shocks and vibrations, and contamination. Electronics, including servo drives, can malfunction or sustain permanent damage in these conditions.

Read More


Service Wire Co. Announces New Titles for Key Executives

Bruce Kesler and Mark Gatewood have been given new titles and responsibilities for Service Wire Co.

Bruce Kesler has assumed the role of Senior Director – Business Development. Bruce will be responsible for Service Wire’s largest strategic accounts and our growing Strategic Accounts Team.

Mark Gatewood has been promoted to the role of Vice President – Sales & Marketing. In this role, Gatewood will lead the efforts of Service Wire Company’s entire sales and marketing organization in all market verticals.

Read More


Tri-Mach Announces the Purchase of an Additional 45,000 sq ft. Facility

Tri-Mach Elmira Facility

Recently, Tri-Mach Inc. was thrilled to announce the addition of a new 45,000 sq ft. facility. Located at 285 Union St., Elmira, ON, this facility expands Tri-Mach’s capabilities, allowing them to better serve the growing needs of their customers.

Positioning for growth, this additional facility will allow Tri-Mach to continue taking on large-scale projects, enhance product performance testing, and provide equipment storage for their customers. The building will also be the new home to their Skilled Trades Centre of Excellence.

Read More


JMP Parent Company, CONVERGIX Acquires AGR Automation, Expanding Global Reach

Convergix Automation Solutions has completed the acquisition of AGR Automation (“AGR”), a UK-based provider of custom, high-performance automation design and systems integration primarily to the life sciences industry.

Following Convergix’s acquisitions of JMP Solutions in August 2021 and Classic Design in February 2022, AGR marks the third investment in Crestview’s strategy to build Convergix into a diversified automation solutions provider targeting the global $500+ billion market, with a particular focus on the $70 billion global systems integration and connectivity segments. Financial terms of the transaction were not disclosed.

Read More


Latest Articles

  • How Advanced X-Ray and AI Inspection Technologies Optimize Quality Control and Reduce Costs in SMT Manufacturing

    How Advanced X-Ray and AI Inspection Technologies Optimize Quality Control and Reduce Costs in SMT Manufacturing

    Explore how Omron’s latest X-Ray machines and AI-driven solutions are setting new standards in manufacturing efficiency and quality control. The manufacturing landscape is swiftly evolving, and Omron is at the forefront with its innovative PCB inspection machines. These systems offer profound insights into SMT production process, enhanced quality control, and can significantly reduce labor costs. Advancements… Read More…

  • KUKA Establishes New Software and Digital Business Segment

    KUKA Establishes New Software and Digital Business Segment

    Software is playing an increasingly important role in mechanical engineering. What used to be mostly solved mechanically is now done by electronics and the associated software. “With KUKA Digital, we are expanding our offering in order to position ourselves broadly for a market with strong growth potential. Our customers need products, solutions and consulting approaches to digitalize… Read More…