Littelfuse IX4351NE SiC MOSFET & IGBT Driver Wins Annual Power Product Award

DCS 5 Littelfuse logo 400

December 8, 2020

Littelfuse, Inc. recently announced its IX4351NE SiC MOSFET and IGBT Driver has been named a Green Energy Award Winner for 21ic.com’s 2020 Annual Power Product Awards. Held for the last 17 years, these awards recognize and honor the best products throughout the world that succeed in energy conservation and environmental protection.

The power supply technologies of tomorrow are more than energy porters. Highly-efficient power supply technologies are drivers of innovation, allowing for better products and more advanced systems. The IX4351NE offers one of the highest energy efficiency ratios in its class, making it one of the most energy-conscious and environmentally-friendly drivers available today.

The Annual Power Product Awards presented by 21ic.com serves as one of the best display platforms for today’s power supply technologies due to the number of participating manufacturers and the wide range of product categories. For the 2020 selection, the Littelfuse IX4351NE SiC MOSFET and IGBT Driver was chosen as one of the only two winners of the Green Energy Award due to its superior green energy savings capabilities and improved cost performance.

Designed specifically to drive SiC MOSFETs and high power IGBT, the IX4351NE offers a separate 9 A source and sink outputs, allowing for tailored turn on and turn off timing while minimizing switching losses. The device’s internal negative charge regulator provides a selectable negative gate drive bias, delivering improved dV/dt immunity and a faster turn off. This driver eliminates the need for a separate negative supply, with an operating voltage range of -10 V to +25 V.

“On behalf of everyone at Littelfuse, we are honored to receive the Green Energy Award for the IX4351NE,” said David Zha, China electronics sales director at Littelfuse. “This award means a lot to our team, as it recognizes our innovation in the power supply category, and our ongoing commitment to greener and more energy-efficient products.”

Source

Related Articles

nVent HOFFMAN Software Will Simplify Engineering Processes and Connect Fabrication and Workers to Drive Productivity

nVent Electric plc  recently previewed its upcoming digital manufacturing software portfolio at Rockwell Automation Fair in Chicago on November 16-17. The Design to Manufacturing Software, powered by Zuken’s E3.series, is a proven and fast engineering system for designers and manufacturing personnel.

 

 

 

Siemens ensures safe electrical installation at the new Bauhaus Museum Dessau

Siemens ensures safe electrical installation at the new Bauhaus Museum Dessau

The new Bauhaus Museum Dessau (Germany) opened its doors in September 2019, featuring technology from Siemens Smart Infrastructure to help keep visitors and its extensive collection safe. A comprehensive solution for safe electrical installations extends throughout the museum’s 5,500 square meter footprint, which includes over 1,000 exhibits from the Bauhaus Dessau Foundation’s collection. The latter comprises 49,000 objects, making it the second-largest Bauhaus collection worldwide. It contains numerous student works and teaching documentation, as well as drafts and prototypes from the workshops of the renowned art academy, which celebrates its 100 th anniversary this year.

 

 

 

OmniCable Canada Presented with the Belden “We Succeed Together through Teamwork” Award

OmniCable Canada Presented with the Belden “We Succeed Together through Teamwork” Award

Recently, OmniCable Canada were excited to announce that they were presented with the Belden “We Succeed Together through Teamwork” Award. They are proud to partner with Belden. Omni Cable, LLC has a proven track record of excellence as a redistributor of wire and cable, electrical products, and value-added services. OmniCable enhanced its partnership with Belden further in 2022, especially in Canada.

Changing Scene

  • Wesco Opens State-of-the-Art Facility in Eastern Canada to Support Influx of Megaprojects in the Region

    Wesco Opens State-of-the-Art Facility in Eastern Canada to Support Influx of Megaprojects in the Region

    Wesco International has recently announced the grand opening of a new state-of-the-art facility on Higney Avenue in Dartmouth, Nova Scotia, Canada, making this the largest facility of any distributor in the Atlantic region. The new building, facilitated by Touchette Real Estate, a division of Groupe Touchette, will feature Wesco’s comprehensive suite of services and solutions including… Read More…

  • PataBid Nominated for Canadian Choice Award in Software Services

    PataBid Nominated for Canadian Choice Award in Software Services

    PataBid is proud to announce its nomination for a Canadian Choice Award in the Software Services category. This recognition highlights PataBid’s commitment to supporting the electrical contracting community across Canada by providing innovative estimating software solutions that streamline estimating processes and ensure predictable and profitable projects. Read More…

Sponsored Content
The Easy Way to the Industrial IoT

The way to the Industrial IoT does not have to be complicated. Whether access to valuable data is required or new, data-driven services are to be generated, Weidmuller enables its customers to go from data to value the easy way. Weidmuller’s comprehensive and cutting-edge IIoT portfolio applies to greenfield and brownfield applications. Weidmuller offers components and solutions from data acquisition, data pre-processing, data communication and data analysis.

Visit Weidmuller’s Industrial IoT Portfolio.

ADVANCED Motion Controls Takes Servo Drives to New Heights (and Depths) with FlexPro Extended Environment Product Line

Advanced Motion Controls is proud to announce the addition of six new CANopen servo drives with Extended Environment capabilities to their FlexPro line. These new drives join AMC’s existing EtherCAT Extended Environment FlexPro drives, making the FlexPro line the go-to solution for motion control applications in harsh environments.

Many motion control applications take place in conditions that are less than ideal, such as extreme temperatures, high and low pressures, shocks and vibrations, and contamination. Electronics, including servo drives, can malfunction or sustain permanent damage in these conditions.

Read More

Service Wire Co. Announces New Titles for Key Executives

Bruce Kesler and Mark Gatewood have been given new titles and responsibilities for Service Wire Co.

Bruce Kesler has assumed the role of Senior Director – Business Development. Bruce will be responsible for Service Wire’s largest strategic accounts and our growing Strategic Accounts Team.

Mark Gatewood has been promoted to the role of Vice President – Sales & Marketing. In this role, Gatewood will lead the efforts of Service Wire Company’s entire sales and marketing organization in all market verticals.

Read More

Tri-Mach Announces the Purchase of an Additional 45,000 sq ft. Facility

Tri-Mach Elmira Facility

Recently, Tri-Mach Inc. was thrilled to announce the addition of a new 45,000 sq ft. facility. Located at 285 Union St., Elmira, ON, this facility expands Tri-Mach’s capabilities, allowing them to better serve the growing needs of their customers.

Positioning for growth, this additional facility will allow Tri-Mach to continue taking on large-scale projects, enhance product performance testing, and provide equipment storage for their customers. The building will also be the new home to their Skilled Trades Centre of Excellence.

Read More

JMP Parent Company, CONVERGIX Acquires AGR Automation, Expanding Global Reach

Convergix Automation Solutions has completed the acquisition of AGR Automation (“AGR”), a UK-based provider of custom, high-performance automation design and systems integration primarily to the life sciences industry.

Following Convergix’s acquisitions of JMP Solutions in August 2021 and Classic Design in February 2022, AGR marks the third investment in Crestview’s strategy to build Convergix into a diversified automation solutions provider targeting the global $500+ billion market, with a particular focus on the $70 billion global systems integration and connectivity segments. Financial terms of the transaction were not disclosed.

Read More

Latest Articles

  • How Advanced X-Ray and AI Inspection Technologies Optimize Quality Control and Reduce Costs in SMT Manufacturing

    How Advanced X-Ray and AI Inspection Technologies Optimize Quality Control and Reduce Costs in SMT Manufacturing

    Explore how Omron’s latest X-Ray machines and AI-driven solutions are setting new standards in manufacturing efficiency and quality control. The manufacturing landscape is swiftly evolving, and Omron is at the forefront with its innovative PCB inspection machines. These systems offer profound insights into SMT production process, enhanced quality control, and can significantly reduce labor costs. Advancements… Read More…

  • KUKA Establishes New Software and Digital Business Segment

    KUKA Establishes New Software and Digital Business Segment

    Software is playing an increasingly important role in mechanical engineering. What used to be mostly solved mechanically is now done by electronics and the associated software. “With KUKA Digital, we are expanding our offering in order to position ourselves broadly for a market with strong growth potential. Our customers need products, solutions and consulting approaches to digitalize… Read More…